Re: prob in receiving mails from hotmail ,yahoo and gmail

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance




hi jim,
thanku soo much for replying me continously , my problem was solved the
problem was in the pix , my network admin has put some access list thats why
mails from outside the domain unable to find the path of my domain, now i can
send and receive mails from any domain , thank u soo much once again for
helping me

regards ali



"Jim McBee [MVP Exchange]" wrote:

> Hi Ali:
> Can you telnet from outside of your network to your server? You should
> not be able to put in the "To" address of an external address when you use
> TELNET (when you use the RCPT TO command). That is considered relaying.
>
> Try to send me an e-mail to a test mailbox from that domain and I'll
> look at the headers and try to reply back to you. Send it to jmcbee (at)
> somorita.com and I'll take a look at it.
>
> --
> Jim McBee
> Blog: http://mostlyexchange.blogspot.com
> Web: http://www.somorita.com
>
>
> "mohammad ali" <mohammadali@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> news:CA39A835-BA78-444C-9F56-3121D366DC73@xxxxxxxxxxxxxxxx
> > hi ,
> > thanks jim for replying me , jim i can telnet to smtp from internal
> > network and it is working properly i can send mail internaly through smtp
> > but when i put the id of hotmail it will give the error that "unable to
> > relay
> > for smartali2@xxxxxxxxxxx" smartali2@hotmail is my hotmail id , i have no
> > any
> > IMF and i cant receive any mail from other domains but i can send the
> > mails
> > from my domain, plzz help me for this prob,
> > thanks
> > regards ALI.
> >
> > "Jim McBee [MVP Exchange]" wrote:
> >
> >> Are you receiving Internet mail from other domains? Do a quick check of
> >> your public MX record to make sure that it is pointing to the correct
> >> server
> >> handling inbound mail. Can you TELNET to port 25 of your inbound SMTP
> >> server from the Internet? This will almost always work except with
> >> certain
> >> firewalls.
> >>
> >> On your Exchange 2003 server, on the SMTP Virtual Server's properties,
> >> enable SMTP protocol logging. Then, send a couple of messages from
> >> outside
> >> and see if the messages appear in the protocol log. Perhaps something
> >> like
> >> the Exchange 2003 Intelligent Message Filter is stopping them. Are you
> >> running the IMF?
> >>
> >> --
> >> Jim McBee
> >> Blog: http://mostlyexchange.blogspot.com
> >> Web: http://www.somorita.com
> >>
> >>
> >> "mohammad ali" <mohammadali@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> >> news:439E734D-F933-457F-91D6-89979265DA34@xxxxxxxxxxxxxxxx
> >> > hi ,
> >> >
> >> > i have an exchange 2003(sp1) with server 2003(sp1) on high end machine
> >> > ,i
> >> > am
> >> > using smtp and pop3 protocol for the incoming and outgoing emails and
> >> > smarthost is define on smtp, i can send mails to internal domain and
> >> > also
> >> > send mails to hotmail , yahoo and gmail but the mails are not receiving
> >> > from
> >> > hotmail , yahoo or gmail to my domain , and its amzaing that hotmail,
> >> > yahoo ,
> >> > and gmail didnt give the mailer demon notification , so plzz tell me
> >> > what
> >> > that prob where my mails are stuck
> >> > thanks in advance
> >> > regards Ali
> >>
> >>
> >>
>
>
>
.



Relevant Pages

  • Help on Exchange setup and remote work place
    ... I have fairly good idea about computers and network, but i am and not very ... through him and currently recives all mails thru him. ... service Provider) and assign it to the ADSL modem. ... I have heard that Dynamic IP can also be configured to use with exchange. ...
    (microsoft.public.windows.server.sbs)
  • Re: E-Mail Help
    ... >attachments Some of the attachments ... consider getting an embedded e-mail server. ... mails per day which ever comes first. ... attacker allow to use it as a gateway into your network etc. etc. ...
    (comp.mail.misc)
  • Re: DoEvents??
    ... >>I'm clutching at straws. ... | of network or system delays, ... | "Jim Rech" wrote: ...
    (microsoft.public.excel.programming)
  • Re: [SLE] SAMBA Problem
    ... On Monday 28 July 2003 12:03, Jim Cunning wrote: ... Ever since the adoption of CIDR (Classless Inter-Domain ... If a routing device does exist in the network, ...
    (SuSE)
  • Re: Microsoft screws up AGAIN. Now your programs may stop working!
    ... ...Jim Thompson ... newer programs won't load under 2K. ... or to another drive on the network. ...
    (sci.electronics.design)