Placing OWA on DMZ

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Can anyone tell me how to place an OWA server on the DMZ of a pix? I have
tried opening up ports using conduit command but I am not able to
authenticate back in to our network. Any one have any ideas?
.

Relevant Pages

  • RE: Exhange 2003
    ... Is the PIX smtp fixup protocol enabled? ... > and when the Exchange server actually presented it's 220 banner. ... no restriction on ports or types of traffic just on host... ... >>But if you open a tcp connection and after that run nbtstat command, ...
    (Pen-Test)
  • Re: exchange being switched to static ports due to firewall
    ... this is from memory as I ditched Cisco Pix years ago and I'm ... access-group acl_outside in interface outside ... Cisco, I have to tell exchange to use static ports, and I have to tell my ... I'm sticking a cisco 506e pix in front of my mail server which is stand ...
    (microsoft.public.exchange2000.connectivity)
  • Re: Secure network question???
    ... that a PIX 501 is something that I can afford, Sorry, I was thinking back a ... programed a Cisco router for B-ISDN so you will still hear from me in the ... security and have a sound knowledge of reflexive ACL's. ... I don't yet know what ports that would be. ...
    (comp.dcom.sys.cisco)
  • Re: Adding a second NIC
    ... Then I just need to open the proper ports on the PIX... ... The PIX Firewall/Router has a Public and a Private side. ... SBS External NIC, 192.168.0.2 ... DNS for the external NIC will point to the SBS server ...
    (microsoft.public.windows.server.sbs)
  • Re: Security
    ... I would use a combination for your network layout:) You could use ISA ... depth and the PIX allows unnecessary/unwanted traffic to be removed on the ... Subsequently I would use two Nics in your SBS server with the topology ... how do I open ports to allow e-mail to come directly to my ...
    (microsoft.public.windows.server.sbs)