Re: Multiple Virtual Server Problems

From: mustafa (mustafa_at_discussions.microsoft.com)
Date: 11/03/04 

Date: Wed, 3 Nov 2004 00:07:02 -0800

Hi Ben!
Even if I defined different IP address for the second VS I could not start
this VS!!!

Best Regards
Mustafa

"Ben Winzenz [Exchange MVP]" wrote:

> Ok - here's what I did, although I don't understand the point of this.
>
> On the initial POP3 VS, remove the SSL port. On the second POP3 VS, remove
> the TCP port and ensure that the SSL port is set to 995. Next, on the
> properties of the second VS, go under Access, authentication, and set the
> option to require SSL. Next, stop the first VS and restart it, then start
> the second VS. This allowed me to have both VS's started. See if that
> helps.
>
> --
> Ben Winzenz
> Exchange MVP
>
>
> "mustafa" <mustafa@discussions.microsoft.com> wrote in message
> news:40FF50CE-CCB4-4DBA-B9E0-ABDE6D5B759D@microsoft.com...
> > Hi Ben!
> > TZhanks for your reply. Exchange has the functionality with one IP address
> > many virtual servres to manage.
> >
> > Best Regards
> > Mustafa
> >
> > "Ben Winzenz [Exchange MVP]" wrote:
> >
> >> If you want to have multiple VS's, they must each have a separate IP. No
> >> way around that that I know of.
> >>
> >> --
> >> Ben Winzenz
> >> Exchange MVP
> >>
> >>
> >> "mustafa" <mustafa@discussions.microsoft.com> wrote in message
> >> news:F6E42B72-1652-4A9A-8EE6-1884626D03DC@microsoft.com...
> >> > Hi!
> >> > I have problem with multiple POP3/IMAP4 virtual servers on Exchange
> >> > 2003.
> >> > I have Default Virtual Server POP3/IMAP4 and wanted to create the
> >> > second
> >> > secure server with the same IP address. The created second virtual
> >> > server
> >> > (POP3 or IMAP4) cannot be startet. There is an eventview warning:
> >> >
> >> > Event ID: 1036
> >> > Source: POP3Svc
> >> > Category: General
> >> > Error-Massage:
> >> > "An error occurred while starting the Microsoft Exchange POP3 Service:
> >> > server instance number 2 failed to start with error 0x800cc801."
> >> >
> >> > All my port and IP configurations for virtual servers are correct. I
> >> > have
> >> > the following configurations for POP3 virtual servers:
> >> >
> >> > Default Virtual Server:
> >> > IP: 10.10.4.1
> >> > Port: 110
> >> >
> >> > Second Virtual Server:
> >> > IP: 10.10.4.1
> >> > Port: 995
> >> > Certificate: yes
> >> >
> >> > There is also NO virus scanner which can have negative influence on
> >> > virtual server. There is also NO certificate problem!!! I tried to
> >> > create
> >> > the additional virtual servers on three different Exchange 2003
> >> > servers.
> >> > No
> >> > chance! On each server I have the same problem!!!
> >> >
> >> > How can I solve this problem? Is that perhaps a bug in Exchange 2003?
> >> >
> >> > Best Regards
> >> > Mustafa
> >>
> >>
> >>
>
>
>

Relevant Pages