Re: Outlook 2003 won't verify Exchange account

From: Gary (tuffboystl_at_hotmail.com)
Date: 06/22/04


Date: Tue, 22 Jun 2004 16:31:03 -0500

Interestingly enough..I ran nslookup on the machine and I did get an error.
I found that my DNS server was configured a little strangely. I was having
some IP address issues when I installed the server and decided to change the
IP address range from 206.something.... to 192.168.1.x. Well...the reverse
lookup stuff still referenced the 206 range. I deleted that and added the
192.168.1.x in and the nslookup came up better.

I had to get off that PC for a little, but without rebooting, this made no
difference. I rebooted the PC and didn't get a chance to try connecting
again.

Now that you mention other protocols, I forgot they did have netboui (is
that how you spell it?) installed. I forgot that I was going to remove
that.

I'm hoping that fixing that DNS thing will resolve my issue. Though it
would be odd that the other machines in the office weren't having the same
problem.

Gary

"JV" <jv@nospam.com> wrote in message
news:%23GJExAEWEHA.3120@TK2MSFTNGP12.phx.gbl...
> Have you got any other network protocols installed other than TCP/IP, if
so
> make sure that the bindings for TCP/IP are located before any other
> protocols. If you open the 'Network Connections' folder then select the
> 'Advanced' option from the list at the top of the window. Select 'Advanced
> Settings' from the menu. On the 'Adapters and Bindings' tab ensure that
> TCP/IP is bound first. then on the 'Provider Order' tab under 'Network
> Provider' move the MS Windows Network up to the top of the list.
>
>
> Bit off topic now but just for your info.
> If you run the NSLOOKUP command you should get a reply from the DNS server
> that shows the FQDN of the server and the IP address, this should reply
> quickly. The NSLOOKUP tool is used for querying DNS servers for instance
> after typing in NSLOOKUP you enter into a session as indicated by the >
> prompt. If you were to type the following commands:
>
> set q=mx
> set debug
> mydomain.com
>
> you should have a reply that shows the details of where the MX records for
> the mail server for the domain are set to.
> The web has plenty of info for using this command as its not a Microsoft
> specific tool.
>
> Hope that helps
>
> JV
>
>
> "Gary" <tuffboystl@hotmail.com> wrote in message
> news:uv7k0o7VEHA.2696@TK2MSFTNGP09.phx.gbl...
> > I've even tried configuring it by IP address...shouldn't that imply that
> > it's not a DNS issue?
> >
> > Thanks,
> > Gary
> >
> > "JV" <jv@nospam.com> wrote in message
> > news:ODekOO6VEHA.2408@tk2msftngp13.phx.gbl...
> > > Gary,
> > > is the DNS lookup for the server working properly? When Outlook checks
> the
> > > name of the server it will use DNS first to resolve the name. Try
> pinging
> > > the exchange server by name from a DOS box, if the reply comes back
fast
> > > then DNS is ok, if it takes about 10 seconds to start to reply, then
> > chances
> > > are that DNS has failed and its resolving the name using WINS.
> > >
> > > Is the client machine running WIndows 98? is the IP information set
via
> > DHCP
> > > or static?
> > >
> > > Remember that for a Windows 2000/2003 network to run properly DNS
should
> > be
> > > configured and tested properly, have you run the NSLOOKUP command from
> DOS
> > > to ensure that DNS is setup properly?
> > >
> > > Hope that helps.
> > >
> > > JV
> > >
> > >
> > > "Gary" <tuffboystl@hotmail.com> wrote in message
> > > news:uJdndryVEHA.3696@TK2MSFTNGP10.phx.gbl...
> > > > Is there anything I can do or check when an individual PC won't
verify
> > the
> > > > accounts on the exchange server?
> > > >
> > > > I actually have two PC's that I'm having problems with, but when I
> > create
> > > a
> > > > new profile and add Exchange Server and then try to verify that I
have
> > the
> > > > right name, I get an error saying that the Exchange server is
> > unavailable.
> > > >
> > > > Any help would be appreciated.
> > > >
> > > > Thanks,
> > > > Gary
> > > >
> > > >
> > >
> > >
> >
> >
>
>



Relevant Pages

  • Re: DNS and NSLOOKUP ISSUES
    ... Figured I'd try some NSLOOKUP ... DNS request timed out. ... and include BOTH the "command" AND the results. ... when I point to an external DNS server for verification purposes. ...
    (microsoft.public.windows.server.dns)
  • Re: RDNS Timeout problems
    ... I can point nslookup directly to your DNS server and receive query answers for PTR records for your IP addresses. ... nslookup from inside my network, ...
    (microsoft.public.exchange.connectivity)
  • Re: DNS and NSLOOKUP ISSUES
    ... Maybe I'm not understanding what exactly you mean from the command. ... Figured I'd try some NSLOOKUP queries to troubleshoot the matter. ... DNS request timed out. ... This only happens when I point to an external DNS server for verification purposes. ...
    (microsoft.public.windows.server.dns)
  • Re: DNS and NSLOOKUP ISSUES
    ... launch CMD from the run menu and type NSLOOKUP. ... That DNS address on the ends tells SPECIFICALLY which DNS server ... I really wish you would do these from the COMMAND prompt ... when I point to an external DNS server for verification purposes. ...
    (microsoft.public.windows.server.dns)
  • Re: DNS Troubles I think?
    ... >> I could instantly see the site and an nslookup resolved the new IP but ... >> was through a dailup account and not connected to the network. ... >> All clients on the network could not however see the site anymore and ... >> work but the I restarted the DNS server and I have some success. ...
    (microsoft.public.windows.server.sbs)

Loading