Re: OWA could not access email after moving mailbox

From: Jessica (anonymous_at_discussions.microsoft.com)
Date: 02/15/04


Date: Sat, 14 Feb 2004 22:50:17 -0800

Hi Dan
I captured the frames and viewed but none of the RPC
packets found. Its weired.. I could not send you the
file due to some ftp errors.

Do you think there could be any other reasons.

Anyway I really appriciate your help.

>-----Original Message-----
>IIS doesn't redirect persay - it accesses DS on 5.5
Server A via RPC calls
>and then it says I don't have that Server B does. IIS
then connects to IS
>on Server B via RPC calls.
>
>Your best bet is to get a netmon and I could look at
it. Set the buffer to
>10MB so it doesn't drop any packets. Start trace - wait
about 15 seconds
>then open the browser to OWA - let it fully fail - wait
another 15 seconds
>then stop trace.
>
>I'll be here for about 6 more hours if you wanna zip the
capture and upload
>it to ftp://ftppss.microsoft.com/Incoming/Mail/
>
>Just post the name of the file once you upload.
>
>--
>Hope that helps,
>Dan Townsend
>
>This posting is provided "AS IS" with no warranties, and
confers no rights.
>Please do not send email to this address, post a reply
to this newsgroup.
>
>Use of included script samples are subject to the terms
specified at
>http://www.microsoft.com/info/cpyright.htm
>
>"Jessica" <anonymous@discussions.microsoft.com> wrote in
message
>news:105e401c3f386$25200ad0$a001280a@phx.gbl...
>> I checked the server redirect from performance monitor.
>> It does not show any bytes count at the time I try to
>> access through OWA.
>> OWA giges the message "unable to get in Mailbox". So
what
>> I think is its not redirecting through IIS by some
reason.
>>
>> Jessica
>>
>> >-----Original Message-----
>> >Yes it should redirect.
>> >
>> >You would look at the RPC traffic and see if goes to
the
>> 5.5 server and then
>> >to the new server.
>> >
>> >--
>> >Hope that helps,
>> >Dan Townsend
>> >
>> >This posting is provided "AS IS" with no warranties,
and
>> confers no rights.
>> >Please do not send email to this address, post a reply
>> to this newsgroup.
>> >
>> >Use of included script samples are subject to the
terms
>> specified at
>> >http://www.microsoft.com/info/cpyright.htm
>> >
>> >"Jessica" <anonymous@discussions.microsoft.com> wrote
in
>> message
>> >news:1089c01c3f37c$f3be11c0$a401280a@phx.gbl...
>> >> Thanks Dan
>> >> Yes, they are still using the OWA 5.5 interface. Are
>> they
>> >> supposed to be redirected automatically to their new
>> >> server? How can I check this using the network
capture?
>> >>
>> >> Jessica
>> >>
>> >> >-----Original Message-----
>> >> >Are they still using the OWA 5.5 interface? If so
I'd
>> >> get a network capture
>> >> >and make sure its getting redirected to the new
box.
>> If
>> >> the Outlook
>> >> >profiles redirected automatically then OWA should
>> >> function as long as the
>> >> >box running it has full connectivity to the new
>> server.
>> >> >
>> >> >--
>> >> >Hope that helps,
>> >> >Dan Townsend
>> >> >
>> >> >This posting is provided "AS IS" with no
warranties,
>> and
>> >> confers no rights.
>> >> >Please do not send email to this address, post a
reply
>> >> to this newsgroup.
>> >> >
>> >> >Use of included script samples are subject to the
>> terms
>> >> specified at
>> >> >http://www.microsoft.com/info/cpyright.htm
>> >> >
>> >> >"Jessica" <anonymous@discussions.microsoft.com>
wrote
>> in
>> >> message
>> >> >news:7f9e01c3f373$6a1a6850$7d02280a@phx.gbl...
>> >> >> Recently I moved few mailboxes from exchange 5.5
to
>> >> >> exchange 2k server within the same site and
domain.
>> >> Moved
>> >> >> mailboxes are working fine with ms-outlook but
users
>> >> >> could not access their mailbox from OWA. Both of
the
>> >> >> exchange servers are working fine for inbound and
>> >> >> outbound emails and users having their mailbox in
>> ex5.5
>> >> >> can still access their mailbox through OWA.
>> >> >>
>> >> >> I believe that I may need to do some extra
>> >> configuration
>> >> >> to redirect mailboxes.
>> >> >> Please help me...?
>> >> >>
>> >> >> Jessica
>> >> >
>> >> >
>> >> >.
>> >> >
>> >
>> >
>> >.
>> >
>
>
>.
>



Relevant Pages

  • Re: newbie question about snoop
    ... > are you able to run snoop on server A, and capture packets between B ... Otherwise you only see MAC layer broadcast or unsteered ...
    (comp.unix.solaris)
  • [TOOL] RPCAP, Remote Packet Capture System
    ... RPCAP is a Remote Packet Capture system. ... and uplink the captured packets to another ... the server which captures network traffic on a remote system, ... and a client, which receives and processes these packets. ...
    (Securiteam)
  • RE: WebDav - WebFolders - Slow on XP clients
    ... saving the first capture file. ... I have checked the packets. ... I find the three XP machines are located in three ... What is the OS version of your IIS Server? ...
    (microsoft.public.windowsxp.general)
  • RE: WebDav - WebFolders - Slow on XP clients
    ... I have checked the packets. ... I find the three XP machines are located in three ... please capture network monitor traces on these XP machines. ... What is the OS version of your IIS Server? ...
    (microsoft.public.windowsxp.general)
  • CD drive not supported under kernel 2.6? (repost and update)
    ... the ATA drives are SCSI and is having problems with the CD drive there. ... USB Universal Host Controller Interface driver v2.2 ... RPC: call_verify: program 100021, version 4 unsupported by server ...
    (comp.os.linux.setup)