Re: Controls don't render

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

I am sorry that I can't do a lot from here. I've certainly seen messages
like yours posted on the newsgroups before, but that was quite a while ago.
I was under the impression that this issue was fixed in the current drops of
the framework. I'm going to suggest that you get hold of Product Support
Services to help with this situation.

When you re-installed the framework, did you use the console (available
through Virtual Server) or did you use Terminal Services? If you used T/S,
then you may have still have had anti-virus running if the console was
logged in or if it is running as a service.

I did a search of the public KB and didn't see anything, unfortunately.
I'm not in PSS, and I'm working from home, so I don't have any more
resources than you do.

Good Luck

--
--- Nick Malik [Microsoft]
MCSD, CFPS, Certified Scrummaster
http://blogs.msdn.com/nickmalik

Disclaimer: Opinions expressed in this forum are my own, and not
representative of my employer.
I do not answer questions on behalf of my employer. I'm just a
programmer helping programmers.
--
"AbeR" <AbeR@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:BFC06ACE-4A56-453A-95D4-5DAC9306C3E0@xxxxxxxxxxxxxxxx
> Hi Nick,
>
> Thanks so much for the response. Your recommendation sounded very
> reasonable
> and I tried it out. Unfortunately I got the same response. The Server is a
> Windows 2000 terminal server. The IT staff has given me administrative
> rights
> to this virtual server. My test application has been reduced to one form
> with
> one button and two labels, one as a static title and one "message"
> container,
> and one on_click event to print text
> to the message. I copy the files over (I know enough to copy the aspx,
> config files, and bin directory...) and when I run the "app" in browser
> only
> the static label renders (no button). Now it makes perfect sense that .NET
> framework did not install properly, so I turned off Mcaffee antiVirus and
> reloaded framework 1.1 (SP1) from MS site. It ran properly, told me it was
> successful (I have user {domain}/ASPNET ... seems like no problem, right?
> Nooooooooooo! I've scoured MSDN and TechNet for weeks now with no results,
> I'm an external consultant, so IT is not paying much attention to me.
>
> Could they (net administrator) have a setting or group policy affecting
> IIS
> that prohibits dotnet from running? There is no software firewall, so
> that's
> not an issue because I'm testing from the server. I can run static web
> pages
> fine. I've run out of ideas, so I'm open to anything (yes I'm feeling
> despirate here :( . Any direction or leads would be really helpful.
>
> -- Abe
>
>
> "Nick Malik [Microsoft]" wrote:
>
>> It is quite possible that the antivirus app running on your client's
>> machine
>> prevented the .Net Framework installation from happening correctly. Can
>> you
>> connect to that machine as administrator, turn off anti-virus, and
>> reinstall
>> the framework? You are free to turn the anti-virus back on after that.
>>
>> --
>> --- Nick Malik [Microsoft]
>> MCSD, CFPS, Certified Scrummaster
>> http://blogs.msdn.com/nickmalik
>>
>> Disclaimer: Opinions expressed in this forum are my own, and not
>> representative of my employer.
>> I do not answer questions on behalf of my employer. I'm just a
>> programmer helping programmers.
>> --
>> "AbeR" <AbeR@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
>> news:E6142EEC-E6AE-41BB-904C-66F93B859D20@xxxxxxxxxxxxxxxx
>> > I'm an intermediate/novice (I've probably developed a half dozen
>> > ASP.NET
>> > apps
>> > at this point) ASP.NET C# developer at this point and am totally
>> > strumped
>> > by
>> > a client's setup.
>> >
>> > I am developing this for a client's intrnet. On my client's server
>> > (Windows
>> > 2000 Terminal Server with ASP.NET v1.14322) I can't get any of the
>> > WebForm
>> > controls to render except for Label and (Web Form TextBox,
>> > RadioButtonList,
>> > Button, LinkButton all don't render)
>> >
>> > The bin directory w/dll has been copied over. I tried copying over
>> > several
>> > apps that I know work on multiple servers over all have the same
>> > behavior.
>> >
>> > Does anyone have any idea on what can be causing this and/or what I can
>> > do
>> > to make this work?
>> >
>> > Thanks in advance.
>> >
>> > Abe Rosner
>>
>>
>>


.

Relevant Pages

  • Re: Controls dont render
    ... > as a service on the box and IIS might still not see it. ... > is deleted and then reinstalled after the .NET framework is installed. ... >> through Virtual Server) or did you use Terminal Services? ... >> programmer helping programmers. ...
    (microsoft.public.dotnet.general)
  • About XBap, XAML, Browser Applications
    ... for a place like mine where everyone will have a PC that has framework ... since it gets the app from the server each time that it runs ... Is this a reasonable distillation of XBap? ...
    (microsoft.public.dotnet.framework.aspnet)
  • Re: About XBap, XAML, Browser Applications
    ... for a place like mine where everyone will have a PC that has framework ... since it gets the app from the server each time that it runs ... Additionally, in your scenario, you could run you XBAP in full trust, which means that you must install the certificate on every PC. ...
    (microsoft.public.dotnet.framework.aspnet)
  • Re: Controls dont render
    ... Unfortunately I got the same response. ... Windows 2000 terminal server. ... reloaded framework 1.1 from MS site. ... > It is quite possible that the antivirus app running on your client's machine ...
    (microsoft.public.dotnet.general)
  • Re: About XBap, XAML, Browser Applications
    ... its sandbox only allows access back to the same server, so be sure to setup webservices for it to call. ... for a place like mine where everyone will have a PC that has framework ... since it gets the app from the server each time that it runs ... Is this a reasonable distillation of XBap? ...
    (microsoft.public.dotnet.framework.aspnet)