Re: Problem using Remoting with 2 NICs
- From: KidO <KidO@xxxxxxxxxxxxxxxx>
- Date: Tue, 2 May 2006 05:11:02 -0700
I agree with you on the 2 NIC's with same subnet being a bad idea. In this
case, the end-customer's internal LAN subnet (connected to NIC1) was the same
as the subnet we normally use on NIC2 for a private workgroup. The subnet on
NIC2 is determined by a piece of hardware, which I am currently not able to
change the subnet on.
Fortunately, the same subnet for each NIC was not the cause of the problem.
I tested in both cases where the NIC's had the same subnet, and different
subnets. Each case resulted in the same error.
Setting the http channels useIpAddress property to false on the server fixed
the error.
Thanks,
--
- John
"Chaz" wrote:
Having 2 NIC's configured with IP's in the same subnet on any PC is.
generally a bad idea, it does not perform load balancing as you would
expect. Is there some reason you have set it up this way ?
Chaz
"KidO" <KidO@xxxxxxxxxxxxxxxx> wrote in message
news:1BF04534-7988-424C-A0A9-C371D19F39DF@xxxxxxxxxxxxxxxx
Chaz,
Thanks for the reply.
Yes, the 2 NIC's do share the same subnet. My first attempt at correcting
the problem was to change the subnet of one of the NICs. One side (static
IP
- is a small workgroup LAN) Unfortunately, this did not correct the
problem.
I have found that adding the property
props["useIpAddress"] = false;
to the channel configuration (see RegisterServerChannel method from my
original post) when creating the Http Channel(s) allows me to succesfully
connect to the server from either NIC.
The server itself is currently running in a dual NIC configuration at
another installation with no problems. This installation was performed
about
10 months ago. I know that no OS level changes have been made on that
server
since the software was installed. The PC in which the server is installed
now is a fully up to date WinXP Pro_SP2 box. I am suspecting that
something
has changed at the OS (API) level between then and now. I currently have
a
case open with MS suuport in hopes to get to the bottom of the problem.
Thanks,
--
- John
"Chaz" wrote:
Do the 2 NIC's ever share the same IP Subnet ?
e.g. NIC#1 DHCP Assigned 192.168.10.20
NIC#2 Static 192.168.10.1
Chaz
"KidO" <KidO@xxxxxxxxxxxxxxxx> wrote in message
news:CBF9BB69-D939-406B-928A-0038A5A382D1@xxxxxxxxxxxxxxxx
I have a remoting server (Class Factory) running on a PC with 2 NICs.
NIC
1
is DHCP, NIC 2 is fixed IP Address.
I have clients connecting successfully on NIC 1, but clients connecting
to
NIC 2 fail when accessing the methods of the inner classes of the Class
Factory.
For each NIC (IP Address), I create a Server Channel as follows, using
a
different channel name for each NIC (IP Address), and binding the
channel
to
the IPAddress of the NIC:
private void RegisterServerChannel(string name, int port, IPAddress
ipAddress)
{
IDictionary props = new Hashtable();
props["name"] = name;
props["port"] = port;
props["bindTo"] = ipAddress.ToString();
props["strictBinding"] = true;
BinaryServerFormatterSinkProvider serverProv =
new BinaryServerFormatterSinkProvider();
serverProv.TypeFilterLevel =
System.Runtime.Serialization.Formatters.TypeFilterLevel.Full;
BinaryClientFormatterSinkProvider clientProv =
new BinaryClientFormatterSinkProvider();
HttpChannel chnl = new HttpChannel(props, clientProv, serverProv);
ChannelServices.RegisterChannel(chnl);
}
After each Server Channel is registered, I call:
RemotingServices.Marshal(classFactory, objURI,
typeof(IClassFactory));
I have a shared assembly that contains the interfaces for the classes
(simplified):
namespace SharedInterfaces
{
public interface IClassFactory
{
string SomeString{ get; set; }
IInnerClass InnerClass { get; }
}
public interface IInnerClass
{
bool SomeValue { get; }
}
}
When both NICs are enabled (clients connected to NIC 1 work perfectly).
Clients on NIC 2 can connect and successfully call
IClassFactory.SomeString,
but when the Client on NIC 2 calls IClassFactory.InnerClass.SomeValue,
I
get
the following excetion:
System.Net.WebException: The underlying connection was closed: Unable
to
connect to the remote server.
Server stack trace:
at System.Net.HttpWebRequest.CheckFinalStatus()
at System.Net.HttpWebRequest.EndGetRequestStream(IAsyncResult
asyncResult)
at System.Net.HttpWebRequest.GetRequestStream()
at
System.Runtime.Remoting.Channels.Http.HttpClientTransportSink.ProcessAndSend(IMessage
msg, ITransportHeaders headers, Stream inputStream)
at
System.Runtime.Remoting.Channels.Http.HttpClientTransportSink.ProcessMessage(IMessage
msg, ITransportHeaders requestHeaders, Stream requestStream,
ITransportHeaders& responseHeaders, Stream& responseStream)
at
System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage
msg)
Exception rethrown at [0]:
at
System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage
reqMsg, IMessage retMsg)
at
System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData&
msgData, Int32 type)
at SharedInterfaces.IInnerClass.get_SomeValue()
If I disable NIC1, the clients can access the inner classes of the
class
factory on NIC 2. With both NIC 1 and NIC 2 enabled, the clients on
NIC 2
can access "top level" mehtods of the class factory, but cannot access
the
methods referencing the inner classes.
In short, the applicaiton works fine when there is only 1 NIC, but
something
is going wrong when using 2 NICs. I suspect that I have something
missing
in
my configuration, but I am not able to find it.
Any input is greatly appreciated.
Thanks in advance.
--
- John
- References:
- Re: Problem using Remoting with 2 NICs
- From: KidO
- Re: Problem using Remoting with 2 NICs
- From: Chaz
- Re: Problem using Remoting with 2 NICs
- Prev by Date: Re: Problem using Remoting with 2 NICs
- Next by Date: Asycn TCPListener Sample Stops Listening URGENT!!!
- Previous by thread: Re: Problem using Remoting with 2 NICs
- Next by thread: Asycn TCPListener Sample Stops Listening URGENT!!!
- Index(es):
Relevant Pages
|
