Re: Windows CE 5.0 .NET Framework

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

I have one board with GPS and this board uses Windows CE 5.0, and i need to
know what COM port my device is connected, you know?

Paul, i installed 2.0 .NET CF, but when i turn off my system, a older
version return to my system, i think that when i install the new version the
program don´t install in flash memory. What can i do about this?

Thanks.

"Paul G. Tobey [eMVP]" wrote:

If you think about that question, how would a serial port know what it's
connected to? That is, how would it distinguish between being connected to
a PC running HyperTerminal and being connected to a GPS? No, unless it's
using the GPS intermediate driver and that can tell you.

Paul T.

"tmoraes" <tmoraes@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:5C77AA09-CE65-498C-94A9-966CB7273BB2@xxxxxxxxxxxxxxxx
all right now everything is fine.
Problem solved!!!
Thanks!!!

Do you know anything command to list what devices are connected in my
system
in my device?
for example what COM port my GPS system is connected.

regards...
Thanks
Thiago


"Paul G. Tobey [eMVP]" wrote:

Huh? Install the new framework, of course. If you are the device
builder,
change the OS configuration and build a new one. If not, get the
redistributable .NET CF package of whatever version you want to use from
www.microsoft.com/downloads and install it (or, better, ask the device
vendor what to do).

Paul T.

"tmoraes" <tmoraes@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:A9702B8E-7F3A-49FC-8AA1-E49033E48ECC@xxxxxxxxxxxxxxxx
Do you know what can i do to change my .NET Compact Framework in my
device, i
think that change my .NET CF is more better.

"tmoraes" wrote:

ok thanks!!!!
My device uses Microsoft .NET Compact Framework 1.0.
I did one prgram in Visual Studio 2005 with a superior version that my
device.
I don´t know what Service Pack my program uses. I don´t know whow can
i
see
it.
I´m sorry it´s because i´m started now in this programs and i´m
confuse
in
some problems about thot things.
Do you know how i change this .NET Framework in Visual Studio?

"Paul G. Tobey [eMVP]" wrote:

Your program was built against .NET CF 2.0 Service Pack X (1 or 2),
not
2.0,
it would appear. You can use 'cgacutil' on the device to see what
version
of the framework is there. If the .NET CF 2.0 is on the device and
your
program requires 2.0SP2, say, you must have 2.0SP2 or later
installed
on the
device.

Paul T.

"tmoraes" <tmoraes@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:95F42998-6EAA-4F09-B615-9907045356FA@xxxxxxxxxxxxxxxx
Anybody Could help me?

I try to run one aplication with Visual Visual Studio 2005 with
.NET
Compact
Framework 2.0 forms application for Windows CE 5.0, but when i run
my
program
in my device, my device say : This application requires a newer
version of
the Microsoft .NET Compact Framework than version installed on
this
device.

Anybody could tell me How i can do to see my version of .NET
Framework in
my
device in Windows CE 5.0, and what can i do to run my apllication
in
my
device?

I try to run a simple apllication (Hello World).









.

Relevant Pages

  • Re: Conversion from 2008->2003?
    ... will require, at a bare minimum, the 2.0 Framework. ... Foundation, Windows Presentation Foundation, and Windows Workflow. ... time did not install .NET 3.5 and it easily fitted onto the flash disk ... legitimate reasons for not wanting to buy a whole new computer which ran ...
    (microsoft.public.dotnet.general)
  • Re: Framework 3.5 Upgrade Problem
    ... I did a Windows Update and it wanted me to install Framework 3.5 SP1 ... Reboot and logon as administrative user. ...
    (microsoft.public.windowsxp.general)
  • Re: Conversion from 2008->2003?
    ... Many people have perfectly legitimate reasons for not wanting to ... a keen Windows developer with over 10 years experience, ... We use VS 2003.NET and do not want to install 2008. ... If some of the code is being compiled against the 3.5 Framework, ...
    (microsoft.public.dotnet.general)
  • Re: Cannot re-install or uninstall .NET 1.1 on Windows 2003
    ... The 1.1 framework is indeed part of Server 2003, ... Phil Wilson [MVP Windows Installer] ... > Framework to install and function correctly. ...
    (microsoft.public.dotnet.framework.setup)
  • Re: Windows CE 5.0 .NET Framework
    ... GPS intermediate driver, which is configured by the user or the device ... Paul, i installed 2.0 .NET CF, but when i turn off my system, a older ... i think that when i install the new version ... Do you know how i change this .NET Framework in Visual Studio? ...
    (microsoft.public.dotnet.framework.compactframework)