Re: zebra cameo2

Okidoki!!

Regards
Rick



"Harry Simpson" <harry.simpson@xxxxxxxx> escribió en el mensaje
news:%23uycykSVHHA.4380@xxxxxxxxxxxxxxxxxxxxxxx
You can't actually program to it - that was the "kludgy" part. It just
kinda runs with the BT radio and captures output from like serail port 8
or 9 (BT).
And yes I used LabelVista to set the pin but try what Ginny said.....cause
if you didn't set the pin it oughta let you enter a default but i've never
know what that default was so I set up a pin
like 1234
HTH
Harry

"Rick" <rk78bl@xxxxxxxxxxx> wrote in message
news:%23UxMfSSVHHA.1212@xxxxxxxxxxxxxxxxxxxxxxx

Thanks a lot Harry, let me try it, just one more question, this
BTExplorerLite is downloadable from symbol, or in your case it was
installed with the printer driver?
Because in my terminal 9090 it has a BTExplorer, but in vs2005 i can´t do
a reference to it

Regards.
Rick


"Harry Simpson" <harry.simpson@xxxxxxxx> escribió en el mensaje
news:eEBMMcQVHHA.3592@xxxxxxxxxxxxxxxxxxxxxxx
It's a little kludgy Rick but Symbol has a serial port listener for BT
printing called BTExplorerLite (the cab is lite.ARM.CAB) basically what
this does is intercept the serial output say using *** Grier's Serial
code, and directs it to the BT printer that has a relationship with the
device. The only BTExplorerLite UI can be a little printing box that
pops up and the label prints nicely. I'm using this setup with a Symbol
PPT88xx series device and a Zebra QL220 BT printer.

Hope that helps

Harry Simpson

<chris-s@xxxxxxxxxxxx> wrote in message
news:1171963670.700709.46260@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
You all forgot to ask the most obvious question, is it charged and
turned on, remember assumption is the mother of all **** ups ;)

Seriously tho Rick, come on, give us a bit more info.

Chris


On Feb 19, 6:48 pm, "Rick" <rk7...@xxxxxxxxxxx> wrote:
Hi guys!

I have a problem with a zebra cameo2 bluetooth printer, somebody can
help me
please?










.

Loading