Re: CF2.0 WM5 Comms help required please

Yes, but how does it arrive? In what "format"? I assume you'd then want
the receiver to get a handle to the incoming call? And then do what? Call
ReadFile on that handle? That pre-supposed a stream interface layer below
to handle the read, which TAPI certainly doesn't expose.

Again, I'll ask, but logically I have doubts about whether this is possible.

-Chris

<dbonfilt@xxxxxxxxx> wrote in message
news:1170861024.352849.163010@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hi ctacke,

I'll see if I can get an answer for you
from our guy who is.

Many thanks!!! It would be very nice.


You're thinking something akin to
a raw serial port? How would the
receiver handle the incoming data?

Yes, I'm thinking something similar to a raw serial port, once the
connection is established. The receiver must wait for incoming
(formated) data, and then emit a response to that.

No need to route anything because when the GSM modem call an analog
one, the phone network does all the routing. The connection is then
point-to-point from the point of view of the software. You write here,
and it arrives at the other endpoint (just like a TCP socket).

Again, many thanks for your help



.

Relevant Pages

  • Re: Completely Blank E-mail Messages (should be messages with atta
    ... The sender and receiver are on the same ... Format to HTML. ... PA Bear is assuming that the sender is using Outlook and RTF format ...
    (microsoft.public.windows.inetexplorer.ie6_outlookexpress)
  • Re: PCM Wav to I2S?
    ... I need to buffer a certain amount of audio data and this ... SPI or I2C port. ... three-wire serial-digital bus between the receiver and transmitter. ... when digitizing out-of-print LPs for transfer to CD-R format. ...
    (rec.audio.tech)
  • Re: Notes Connector Crashes Notes
    ... Set my incoming mail format in Notes to "Prefers Notes ... Incoming email gets converted to Notes format by Notes, ... Any idea as to how to get this to work without converting ...
    (microsoft.public.outlook.interop)
  • Re: .Net TCP Socket Problem With Missing Chunks From Large Packets
    ... >> An acquaintance asked me to assist him with some TCP socket issues. ... However, when large packets are sent over longer>> distances, the data arrives with portions missing. ... That means that if you send n bytes, the> receiver might receive anywhere from 1 to n bytes when reading data out of> the socket. ...
    (microsoft.public.dotnet.framework.remoting)
  • Re: M-Audio Audiophile 24/96 -> SPDIF -> Yamaha RX-V1600
    ... "You can use digital jacks to input PCM, ... if you can get your receiver to properly accept as ... There may be a problem where your data file is a 24/96 format that the ...
    (rec.audio.pro)