Re: Caller ID on Intel 536ep Modem?

Tech-Archive recommends: Fix windows errors by optimizing your registry

YisMan <yisman@xxxxxxx> wrote:


2. I have tried in HyperTerminal all and any AT commands that I found.
Firstly, AT+VCID=1, which is what is mentioned in the modem's manual as being
the caller ID enabling command, it returned OK. For good measure I tried also
AT+VCID=2, AT#VCID=1,AT%CID=1, and more, some returned ERROR and some OK.


If you cannot see in Hyperterminal incoming Caller ID then no amount
of fooling around with inf files or registry settings is going to
help.

-mhd

.