Re: recording voice through a independent TSP

Aakash,

we are currently developing a TSP with an MSP but
I have no experience in developing a wav driver. Many
companies have done so. It can't be too difficult. Maybe
Grant or Andreas can jump in here...

> If in case i connect the modem to the PBX port directly, in that case
> wht TSP i will be using. coz for modems I shud be using UniModem TSP.
> so where will be my translations from TAPI commands to the PBX
> understandable commands will take place ??

Unimodem can translate between TAPI and AT modem commands.
I don't know about your PBX's commands. If they are similar to AT
commands you _might_ be able to create an inf file for your device
and use it with Unimodem but there are also tons of reasons why this
couldn't work. For information on authoring modem inf file you need
to download the Windows DDK.


Best regards,

Matthias Moetje
-------------------------------------
TERASENS GmbH
Augustenstraße 24
80333 Munich, GERMANY
-------------------------------------
Fon: +49 89 143370-0
Fax: +49 89 143370-22
e-mail: moetje at terasens dot com
www: www.terasens.com
-------------------------------------

"jaakash" <aakash.joshi@xxxxxxxxxxxxxxxxx> wrote in message
news:1132553431.986020.59320@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Hi Matthias,
>
> Thanx for your prompt reply.
> The device which i m talking about, at present it is not sending the
> audio data to the COM port, bt we are planning to do so. The device is
> having its own MIC and speaker. Actually it behaves jst as a desktop
> phone but without any keypads. This device will be controlled using the
> TAPI application (any general TAPI app).
>
> from the suggestions u provided I think the first one would be very
> close to wht i m looking for.
>
> I m aware of the way out with doing MSP, but as u pointed out, then the
> TAPI apps need to use TAPI3, so it cannot be done.
>
> and using the another COM Port setup, I think it will require some h/w
> changes, so that is also not I can proceed with.
>
> But as u said abt that audio driver I think thats the best way out till
> now. bt again I am a novice on writing an audio driver. Do you have any
> idea abt how difficult it can be or any resource pointers which can
> help the cause. I am proceeding in that direction at present.
>
> If in case i connect the modem to the PBX port directly, in that case
> wht TSP i will be using. coz for modems I shud be using UniModem TSP.
> so where will be my translations from TAPI commands to the PBX
> understandable commands will take place ??
>
> Thanking you,
>
> Aakash
>


.

Relevant Pages

  • Re: Future or TAPI
    ... duplex and that the Unimodem driver only supported half duplex operation. ... And when the modem disconnects it does eventually know ... Modems don't have hardware support ... > TAPI application. ...
    (microsoft.public.win32.programmer.tapi)
  • Re: MODEM driver
    ... While installing Modem Driver TAPI sends ATQ0E0V1. ... The classic example is a service modem which is listening for an ...
    (microsoft.public.development.device.drivers)
  • Re: PSTN h323 bridge with TAPI 3
    ... opening HyperTerm and just trying the commands. ... If the modem responds OK ... The client application uses TAPI3 and TAPI3 media streaming ... You can write a wave driver that uses the CSA MSP ...
    (microsoft.public.win32.programmer.tapi)
  • Re: Guide to going native. Pure AT.
    ... A little more research told me that the modem sends the wave info without ... so I thought I'd use the directsound I used in my TAPI app to ... >> but I would like to break it all down to the AT commands. ... > I guess your non-TAPI approach is a little bit OT in this newsgroup... ...
    (microsoft.public.win32.programmer.tapi)
  • Re: TAPI on PocketPC problem
    ... I mean I want to control this modem from ... Do you want to send AT commands via TAPI? ... You can send call related AT commands in LINEBEARERMODE_PASSTHROUGH. ... * Please post all messages and replies to the newsgroup so all may ...
    (microsoft.public.win32.programmer.tapi)