Re: Siemens TAPI 120 - CSTA
- From: "Andreas Marschall [MVP TAPI]" <Andreas.Marschall@xxxxxxxxxx>
- Date: Sun, 2 Oct 2005 08:29:24 -0700
"Hazem K" <HazemK@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:3A43A696-39D7-46DD-AEC0-4255AE717397@xxxxxxxxxxxxxxxx
>> What exactly fails how?
> I tried installing it couple of days ago for 3 time, and in all times I
> got
> errors while some database files were updated (or so..), and after that a
> big
> number of failures and error messages popuped, and all of the PC system
> became somewho unstable so I restored it to a restore point.
>
> anyways I just tried for another time -to get the error messages again-
> and
> this time everything went smooth till the end (!), then it displayed an
> error
> message of :
> "Service could not be started. CCMCService" with no other errors
Hazem,
the CCMCService is only intended for HiPath AllServe systems and requires
additional HiPath services, therefore it can't start.
Please unistall HT170 completly and install with other setup settings.
(Being on abusiness trip I currently have the setup available to tell the
exact settings.)
Please select custom configuration and install only the minimum
configuration.
> After a windows restart, a fax program using an internal modem couldnt
> ititialize its TAPI modem, then "Phone and modem options" from control
> panel
> could not be opened anymore with an error message:
> "Phone and modem control panel can not be opened You may have a problem
> starting telephony service", so I uninstalled the 170 tsp again.
O.k.,these issues are all caused by selecting the setup configuration
containing CCMC.
>> HT120 via CMD (CMD can use a COM port).
>
> I installed HT120 and CMD on my WinXP machine, connected the CSTA cable to
> my com1 serial port and to the pbx..
>
> Configured TAPI120 As folowing:
> System: CMD
> CallNumber: 11 (this is thu number I use to dial the extention)
> Name: myTAPI 120
> IP address: 127.0.0.1
> IPPort: 8001 (default, Then I tried also with value 7700)
> and left the other default settings unchanged.
>
> Configured CMD as following:
> Genral Tab:
> System: HiPath 3000
> CSTA Link: Com 1
> CMD IP port: 7700 (default)
>
> CTI Firwall Tab:
> I added a TAPI 120 IP address as folowing
> Name: myTAPI 120
> TAPI 120 IP address: 127.0.0.1
> Call Number 11
>
> License Tab:
> I added the DEMOMODE license
AFAIK the DEMOMODE license option is only available for HT170 but not for
CMD.
> Then used some tools I have to read the callerID, or dial a call and
> nothing
> happened, no error messages, no captured event, checked with CallBridge TU
> and was working fine.
>
> Is there any settings that should be done on the PBX side by the siemense
> engineers to activate something?
>
> How can I check if my connectivty with the PBX through the CSTA cable is
> working, like on a HyperTerminal session or so?
You can use the CSTA Browser (CB) to check.
It is included in the HT170 AddOn download package:
http://www.siemens.com/index.jsp?sdc_p=pHPo1182106u0l1&sdc_flags=19
--
Best Regards
Andreas Marschall
Microsoft MVP for TAPI / Windows SDK
TAPI / TSP Developer and Tester
http://www.I-B-A-M.de/Andreas_Marschall's_TAPI_and_TSPI_FAQ.htm
* Please post all messages and replies to the newsgroup so all may
* benefit from the discussion. Private mail is usually not replied to.
* This posting is provided "AS IS" with no warranties, and confers no
rights.
.
- Prev by Date: Re: tapi 3 Com problem
- Next by Date: Re: Distorted audio on Dialogic (TAPI 3 in C#)
- Previous by thread: Re: tapi 3 Com problem
- Next by thread: Problems with my call model
- Index(es):
Relevant Pages
|
