Re: Which more useful ? h323.tsp or openH323 ?

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

Are you familiar with the MS TAPI Browser? If so, open the H.323 hosted
line and place an inbound call to that line. Do you get an offering call?
If yes then make sure in dialer that you have selected the H.323 line to
control. If not then post a browser log showing first placing a call on the
H.323 line and then a commented extract showing a failure to detect the
inbound call.

Of course, if you aren't familiar with the browser then I strongly suggest
becoming familiar with it.
--
Grant Schenck
http://grantschenck.tripod.com

"Charles Lee" <CharlesLee@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:0C4932ED-E332-4749-A3C8-AC77424BA0EE@xxxxxxxxxxxxxxxx
> Then the MS dialer don't accept a call from H.323 line.
> But the Net meeting(Conf.exe) accept it.
> What does it mean?
> Is there anything for me to configure?
> For example, should i notify the h323 tsp which program use h323 line?
> Best regard,
>
>
> "Matthias Moetje" wrote:
>
> > > What I want to know is how can i accept a call from h323 line.
> > > Currently i' m writing a program which accept a call from h323 line
and
> > > dispath it to a modem line. What should i configure? I can accept call
> > from
> > > modem address, of course.
> >
> > If you can accept a call from a modem, you can accept a call
> > via the H.323 TSP, too. It's the same procedure.
> >
> > Best regards,
> >
> > Matthias Moetje
> > -------------------------------------
> > TERASENS GmbH
> > Ackermannstraße 3
> > 80797 München
> > -------------------------------------
> > Fon: +49 89 143370-0
> > Fax: +49 89 143370-22
> > e-mail: moetje at terasens dot de
> > www: www.terasens.de
> > -------------------------------------
> >
> > "Charles Lee" <CharlesLee@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> > news:49CC4707-A12A-412F-ACF9-0E2AB6ACD87A@xxxxxxxxxxxxxxxx
> > >
> > >
> > > "Grant Schenck" wrote:
> > >
> > > > I'm no expert on H.323 but based on your message, I have a bit of
> > input...
> > > >
> > > > I don't know about openH323. Does it come with a TSP? If not then
it
> > is
> > > > outside of the scope of this group which is pretty much pure TAPI.
> > > >
> > > > However, assuming you are using the MS supplied H.323 TSP, there
isn't
> > > > anyway to move calls from modem to H.323 and visa versa. Any
movement
> > of
> > > > audio from a modem call to an H.323 call would have to be handled by
> > your
> > > > application.
> > > >
> > > > As for detecting H.323 calls, play with the MS TAPI Browser and the
MS
> > > > dialer applet. The browser will allow you to open the H.323 line
and
> > the
> > > > dialer will allow you to place or receive calls. You should be able
to
> > test
> > > > what is available and how it works.
> > > > --
> > > > Grant Schenck
> > > > http://grantschenck.tripod.com
> > > >
> > > > "Charles Lee" <Charles Lee@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message
> > > > news:4754051D-2A9D-47E5-8918-37234942E211@xxxxxxxxxxxxxxxx
> > > > > Hi all,
> > > > > Would you tell me which i should select ? tapi based on h323.tsp
or
> > > > openH323?
> > > > > i ' m writing a simple program which accept call from h323 line
and
> > foward
> > > > > it to classic modem. i don't know how can i accept call from h323
> > line.
> > > > > i 've wrote a snippet which accept from voice modem.
> > > > > i think that i have to configure h323 tsp , but i don't know how i
> > can.
> > > > > my program detect a call from modem, but don't detect from h323
line.
> > > > > i could' nt find any material about it. Now i interested in
openh323.
> > > > > help me! tell me the way.How can i configure h323 to accept call ?
or
> > is
> > > > it
> > > > > right to give up tapi?
> > > > >
> > > > >Best Regard.
> > > Thanks for your reply
> > > What I want to know is how can i accept a call from h323 line.
> > > Currently i' m writing a program which accept a call from h323 line
and
> > > dispath it to a modem line. What should i configure? I can accept call
> > from
> > > modem address, of course.
> > >
> > > > >
> > > > >
> > > >
> > > >
> > > >
> >
> >
> >


.

Relevant Pages

  • Re: ie, extranet ping problem
    ... > i am not able to browser from both browser. ... But not able to browse the internet. ... If you have a cable/dsl modem, power-cycle it by turning it off for ... If you have a router to go with the cable/dsl modem, ...
    (microsoft.public.windowsxp.general)
  • Kein Zugriff auf DSL Modem Interface
    ... Neuerdings kann ich nicht mehr per Browser auf das Modem Interface ... Heute Abend fand ich dies heraus: ...
    (de.comp.sys.mac.misc)
  • Re: verizon DSL kit requires windows software
    ... >>software they mailed you with the modem. ... >>using a browser to do the whole setup because then it would be easier to ... I have the DSL working now in simple modem-> single pc mode, ... to set that says that even high mode allows IPSEC) ...
    (comp.os.linux.networking)
  • kernel panic bei Internetzugriff
    ... Unterwegs mit dem Apple-eigenen internen Modem. ... Systempartition, internes Modem, Browser: Safari, Mozilla. ... Beide Rechner laufen ansonsten absolut stabil! ... Next by Date: ...
    (de.comp.sys.mac.misc)
  • Re: Faxmodem hardware recommendation
    ... multiple incoming lines. ... Event Category: Inbound ... Device Name: Sportster Voice 33.6 PnP. ... I enabled the log on the modem. ...
    (microsoft.public.windows.server.sbs)