Re: Future or TAPI

"Matthias Moetje" <moetje@xxxxxxxxxxxxxxxxxxx> schrieb im Newsbeitrag
news:OzAqCrKYFHA.2588@xxxxxxxxxxxxxxxxxxxxxxx
> I am not completely sure but in data mode Unimodem might even be
> able to report CS_INPROGRESS and CS_CONNECTED (but
> I never tried that).

Matthias,
I just checked and it does only generate the call states blindly (like in
voice mode).

See TB20.log:
0:7.13.320 : Calling lineInitializeEx
lphLineApp=x2356d0
hInstance=x1000000
lpfnCallback=x10158d7
lpszFriendlyAppName=x6f66c
lpdwNumDevs=x6f644
lpdwAPIVersion=x6f6d8
->dwAPIVersion=x20002
lpInitExParams=x6f62c
->dwOptions=x3
0:7.13.330 : lineInitializeEx returned SUCCESS
num line devs = 47
0:7.22.603 : Calling lineOpen
hLineApp=x800003dd
dwDeviceID=x0
lphLine=x2356e8
APIVersion=x20002
dwExtVersion=x0
dwCallbackInstance=x0
dwPrivileges=x6
dwMediaModes=x10
lpCallParams=x0
0:7.23.214 : lineOpen returned SUCCESS
0:7.28.782 : Calling lineMakeCall
hLine=x10191
lphCall=x2357b0
lpszDestAddress=x6f5e4
dwCountryCode=x0
lpCallParams=x0
0:7.28.792 : lineMakeCall returned x102d4
0:7.28.802 : received LINE_REPLY
device=x0
cbInst=x0
param1=x102d4,
param2=x0,
param3=x1025c,
0:7.28.812 : received LINE_CALLSTATE
device=x1025c
cbInst=x0
param1=x10, DIALING
param2=x0,
param3=x0,
0:7.28.812 : received LINE_CALLSTATE
device=x1025c
cbInst=x0
param1=x200, PROCEEDING
param2=x0,
param3=x0,
0:7.31.866 : received LINE_CALLSTATE
device=x1025c
cbInst=x0
param1=x100, CONNECTED
param2=x0,
param3=x0,

And the corresponding modem log:
05-25-2005 00:07:22.613 - File: F:\WINNT\system32\unimdm.tsp, Version
5.0.2195 - Retail
05-25-2005 00:07:22.613 - File: F:\WINNT\system32\unimdmat.dll, Version
5.0.2195 - Retail
05-25-2005 00:07:22.613 - File: F:\WINNT\system32\uniplat.dll, Version
5.0.2195 - Retail
05-25-2005 00:07:22.613 - File: F:\WINNT\system32\drivers\modem.sys, Version
5.0.2195 - Retail
05-25-2005 00:07:22.613 - File: F:\WINNT\system32\modemui.dll, Version
5.0.2195 - Retail
05-25-2005 00:07:22.613 - Modemtyp: 56K PCI Voice Modem SF-1156IV+ R9A
05-25-2005 00:07:22.613 - Pfad für Modeminformationsdatei: oem0.inf
05-25-2005 00:07:22.613 - Abschnitt in Modeminformationsdatei: Modem
05-25-2005 00:07:23.214 - Opening Modem
05-25-2005 00:07:23.214 - 115200,8,N,1, ctsfl=1, rtsctl=2
05-25-2005 00:07:23.214 - Modem initialisieren
05-25-2005 00:07:23.214 - DSR ist niedrig während der Modeminitialisierung.
Stellen Sie sicher, dass das Modem eingeschaltet ist.
05-25-2005 00:07:23.224 - Senden: AT<cr>
05-25-2005 00:07:23.244 - Empfangen: <cr><lf>OK<cr><lf>
05-25-2005 00:07:23.244 - Interpretierte Antwort: OK
05-25-2005 00:07:23.254 - Senden: AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1;W0<cr>
05-25-2005 00:07:23.274 - Empfangen: <cr><lf>OK<cr><lf>
05-25-2005 00:07:23.274 - Interpretierte Antwort: OK
05-25-2005 00:07:23.284 - Senden: ATS7=60L0M1+ES=3,0,2;+DS=3;+IFC=2,2;X4<cr>
05-25-2005 00:07:23.304 - Empfangen: <cr><lf>OK<cr><lf>
05-25-2005 00:07:23.304 - Interpretierte Antwort: OK
05-25-2005 00:07:23.304 - Auf Anruf warten
05-25-2005 00:07:23.314 - Senden: at+vcid=1<cr>
05-25-2005 00:07:23.334 - Empfangen: <cr><lf>OK<cr><lf>
05-25-2005 00:07:23.334 - Interpretierte Antwort: OK
05-25-2005 00:07:23.344 - Senden: ATS0=0<cr>
05-25-2005 00:07:23.364 - Empfangen: <cr><lf>OK<cr><lf>
05-25-2005 00:07:23.364 - Interpretierte Antwort: OK
05-25-2005 00:07:28.792 - TSP(0000): Making call
05-25-2005 00:07:28.802 - Wählen
05-25-2005 00:07:28.802 - 115200,8,N,1, ctsfl=1, rtsctl=2
05-25-2005 00:07:28.802 - TSP(0000): LINEEVENT: LINECALLSTATE_DIALING
05-25-2005 00:07:28.802 - TSP(0000): LINEEVENT: LINECALLSTATE_PROCEEDING
05-25-2005 00:07:28.812 - Senden: at+fclass=#<cr>
05-25-2005 00:07:29.663 - Empfangen: <cr><lf>OK<cr><lf>
05-25-2005 00:07:29.663 - Interpretierte Antwort: OK
05-25-2005 00:07:29.673 - Senden: at+vls=#<cr>
05-25-2005 00:07:29.703 - Empfangen: <cr><lf>OK<cr><lf>
05-25-2005 00:07:29.703 - Interpretierte Antwort: OK
05-25-2005 00:07:29.713 - Senden: at+vrn=#<cr>
05-25-2005 00:07:29.733 - Empfangen: <cr><lf>OK<cr><lf>
05-25-2005 00:07:29.733 - Interpretierte Antwort: OK
05-25-2005 00:07:29.743 - Senden: at+vtd=##<cr>
05-25-2005 00:07:29.753 - Empfangen: <cr><lf>OK<cr><lf>
05-25-2005 00:07:29.753 - Interpretierte Antwort: OK
05-25-2005 00:07:29.763 - Senden: at+vsm=###,####,#,#<cr>
05-25-2005 00:07:29.773 - Empfangen: <cr><lf>OK<cr><lf>
05-25-2005 00:07:29.773 - Interpretierte Antwort: OK
05-25-2005 00:07:29.783 - Senden: at+vit=#<cr>
05-25-2005 00:07:29.794 - Empfangen: <cr><lf>OK<cr><lf>
05-25-2005 00:07:29.794 - Interpretierte Antwort: OK
05-25-2005 00:07:29.804 - Senden: ATDT###<cr>
05-25-2005 00:07:31.856 - Empfangen: <cr><lf>OK<cr><lf>
05-25-2005 00:07:31.856 - Interpretierte Antwort: OK
05-25-2005 00:07:31.856 - TSP(0000): LINEEVENT: LINECALLSTATE_CONNECTED
05-25-2005 00:07:45.947 - DLE (data link escape) empfangen: Roh= 97,
Übersetzt=2100 Hz Antwortzeichen
05-25-2005 00:07:46.447 - DLE (data link escape) empfangen: Roh= 97,
Übersetzt=2100 Hz Antwortzeichen
05-25-2005 00:07:46.948 - DLE (data link escape) empfangen: Roh= 97,
Übersetzt=2100 Hz Antwortzeichen


--
Best Regards
Andreas Marschall
Microsoft MVP for TAPI / Windows SDK
TAPI / TSP Developer and Tester
http://www.I-B-A-M.de/Andreas_Marschall's_TAPI_and_TSPI_FAQ.htm
* Please post all messages and replies to the newsgroup so all may
* benefit from the discussion. Private mail is usually not replied to.
* This posting is provided "AS IS" with no warranties, and confers no rights.



.

Relevant Pages

  • Re: Future or TAPI
    ... > Try setting the media mode in the lpCallParams in lineMakeCall. ... With _DATAMODEM in lineMakeCall's LINECALLPARAMS.dwMediaMode of the calling ... 11:19.58.877: lineInitializeEx returned SUCCESS ... - Retail ...
    (microsoft.public.win32.programmer.tapi)
  • Re: lineDrop - state does not return to idle...
    ... Modem stays on-hook in both cases. ... 9:56.48.249: Calling lineInitializeEx ... 9:56.51.583: lineInitializeEx returned SUCCESS ... - Retail ...
    (microsoft.public.win32.programmer.tapi)
  • Switch from Action Pack SBS to Retail?
    ... Retail? ... I don't want to have to Swing or Wipe/Install, ... Calling an illegal alien an "undocumented worker" is like calling a ...
    (microsoft.public.windows.server.sbs)
  • Re: SBS 2008 Standard OEM - MS has pulled it
    ... Since when are OEM versions and retail versions any different? ... many bugs in the SBS 2008 Standard OEM version and will only sell Retail ... Calling an illegal alien an "undocumented worker" is like calling a ...
    (microsoft.public.windows.server.sbs)
  • Re: how do I activate office switching to new computer?
    ... If you Office is an OEM copy you ... If it is retail you can move it as long ... I tried calling, but did NOT get any results. ... Prev by Date: ...
    (microsoft.public.office.misc)