Re: Tapi Events

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: Michael Dunn (tapi_at_rainyjay.com)
Date: 10/01/04 

Date: Thu, 30 Sep 2004 20:36:30 -0700

Sub wrote:

> Is there any other way of making my modem not wait as long for the
> dial tone? I looked at my modems manual, and there is an S Register
> which contains the number of seconds it should wait for a dial tone. I
> tried taking the modem into terminal mode and changing the value of
> the register to 1, and then running my application, but it still
> didn't work. The AT commands said it was successful.

In Hyperterminal (or whatever terminal mode program) try dialing using
ATDT5551234 and see if you get similar Connected/Disconnected results.
Then try setting the S Register and dialing again. Any better?

When you open the line, Unimodem will sent the configured modem init
string, which may destroy previous settings. If you know the setting is
what you want, you can try modifying your init string to send it. 

-- 
Michael Dunn (Microsoft MVP) is a TAPI Developer and Tester
TAPI web page:  http://www.rainyjay.com/tapi/tapi.htm
TAPI discussions belong in the newsgroup, and not in private email.
"I'm not insane, I'm just choosy about the reality I accept."

Relevant Pages

  • Re: RESOLVED: RegisterCallNotifications for Multiple Modems?
    ... owner mode but not monitor then that tends to narrow the scope of what ... Part of the issue is that if you are using a modem and monitor mode and ... Second, As all of the TAPI gurus here pointed out, it is neccessary to ... Here is my code for the Register procedure in the class module. ...
    (microsoft.public.win32.programmer.tapi)
  • Re: RESOLVED: RegisterCallNotifications for Multiple Modems?
    ... Part of the issue is that if you are using a modem and monitor mode and no ... other application has the line open in owner mode then you won't get events. ... Second, As all of the TAPI gurus here pointed out, it is neccessary to ... Here is my code for the Register procedure in the class module. ...
    (microsoft.public.win32.programmer.tapi)
  • Re: Using Flashhook with TAPI 3.1 to Transfer w/ a Modem
    ... the TAPI Browser. ... I belive the modem must be a voice modem to support this ... flashhook and get a dial tone through the modem speaker. ...
    (microsoft.public.win32.programmer.tapi)
  • Tapi Events
    ... I am using a telephone line simulator, ... modem, using TAPI 3.1 COM, VS Compiler and unimodem TSP. ... have two seconds of dial tone. ... I looked at my modems manual, and there is an S Register ...
    (microsoft.public.win32.programmer.tapi)
  • Re: Fax number is dialing too quickly
    ... "Peter R. Fletcher" wrote: ... Advanced Modem Properties settings for the modem you are using - in ... This will explicitly tell the modem to wait until it hears a dial tone ... before dialing. ...
    (microsoft.public.windowsxp.print_fax)