Re: How to develop USB interface using Visual C++ ?

5.d@xxxxxxx wrote:
Hi,
Using Microsoft Visual C++, what functions do I have to use
to deal with a USB device ? I did this with RS232 COM ports,
but I did not fond any functions to deal with USB ...
Please help.
TIA

Get the WDK
http://www.microsoft.com/whdc/devtools/wdk/default.mspx
Install it. Look for the "usbview" sample app under src subdir.

Regards,
--PA
.

Relevant Pages

  • 4-Port PCI USB adapter - only 2 ports will work
    ... being that only 2 ports actually work. ... hub.c: new USB device 00:08.1-1, ... usb_control/bulk_msg: timeout ... USB device not accepting new address=6 ...
    (alt.os.linux)
  • 4-Port PCI USB adapter - only 2 ports will work
    ... being that only 2 ports actually work. ... hub.c: new USB device 00:08.1-1, ... usb_control/bulk_msg: timeout ... USB device not accepting new address=6 ...
    (comp.os.linux.hardware)
  • Re: Why USB device is repeatedly disconnecting & reconnecting?
    ... I will hear the beep-boop disconnect sound notifying ... me that the PnP device was stopped. ... USB device to get stopped and then restarted. ... Despite that fact that the ports are paired on the OHCI root hubs, ...
    (microsoft.public.windowsxp.general)
  • Re: OT: For the GPS users
    ... >as a USB device. ... >support and they suggested using a rear USB port rather than one of ... >all the ports were equal. ... >and are using a front slot try plugging it into a rear slot. ...
    (rec.motorcycles.harley)
  • Re: USB 2.0 External Hard Disk is not detected by XP SP2
    ... Usually if a USB device isn't recognized in a ... computer with known good ports, ... Not a lot of things to try here - but one would be to uninstall SP2 and try ... with Windows 2000 and Windows XP is not detected by this particular ...
    (microsoft.public.windowsxp.hardware)
Loading