Re: Multiple IPs on single NIC and multiple VLANs

Hi Rodel,

thanks for the update,


The only thing i could say is that you can only configure VLAN either with
cisco ( any 3rd party hardware ) / Microsoft DHCP server using super scope
option .

a) So can you please tell me how you have configured your VLAN ?

b) How many NIC's are present on your client ( windows client )

for a single NIC i dont think it is possible for DHCP to issue multiple IP
address , but if u want to access different network trying adding persistan
route and check ?

sai



For the queston below ( initial ) a client can obtain multiple ip addresses
from VLAN withs

"Rodel Miguel" wrote:

Hi Sainath,

My setup is
- 1 computer 1 NIC
- 2 VLANs on the same NIC
- 1 IP address per VLAN via DHCP

Thanks for your help!

- Rodel


"Sainath , SMB KID" <SainathSMBKID@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:018FE67E-D062-493F-BB41-4A21F9496CE0@xxxxxxxxxxxxxxxx
Hi Rodel ,

can you please tell me about your set up .

As per my understanding

a) cmputer having 2 NIC cards on single computer

b) you have to connect these 2 NIC cards to different subnet range / 2
differnt switch port

c) Configure DHCP server on both subnets , you problem resolve

or

a) Single computer with 2 NIC cards,

b) Need ip address from single DHCP server , if so you can create a Super
scope where in it leases out logical ip address with in the single
physical
subnet.

just have a search on super scope and it will give your answer


Regards,
sai

"Rodel Miguel" wrote:

Hi Gurus,

I need your help in providing multiple IP addresses with a single NIC.
The
IP addresses should be obtained dynamically (DHCP) but they would be
obtained from different networks, e.g. two VLANs.

How should I do this? Should I create two instances of the same miniport
driver? Or my driver should be able to handle packets from two different
VLANs and then send it to the proper handler on the higher layers?
Please
point me to the proper links if the solution is already available.

I'm sorry if this has been asked on this group before.

Thank you very much for your help!

Best Regards,
- Rodel Miguel







.

Relevant Pages

  • Re: arp-proxy
    ... address allocated by DHCP ... the MAC address for cust1 must never appear as a source MAC ... a broadcast from the service subnet should appear on all customer VLANs ... to the correct customer VLAN ...
    (freebsd-net)
  • Re: Mitel DHCP disaster
    ... Does the scope for the DHCP server that is on VLAN 1, ... programmed that the Mitel phones need? ...
    (comp.dcom.telecom.tech)
  • Re: ONE Linux DHCP Server + Multiple VLANs - Soluble problem?
    ... because I've really tried thousands of dhcp and interfaces configs without success why does WinNT4 manage handle it and not the latest linux kernel... ... DNS server and a linux box as a file server. ... The servers are in VLAN 100 and the other office computers are in the others. ...
    (comp.dcom.sys.cisco)
  • Re: Configuring dhcp on cisco 3750
    ... VLAN 2 contains a DHCP server and several client computers. ... I am using tetheral on the dhcp server 192.168.2.100 interface to look ... switchport access vlan 2 ...
    (comp.dcom.sys.cisco)
  • Re: DHCP superscpes
    ... Use a separate distinct scope for each subnet (VLAN). ... Configure the Routerto forward DHCP Queries. ... will include the required information so the DHCP Server knows where it came ...
    (microsoft.public.windows.server.networking)