Re: Ethernet Trailer

"Galia" <galia@xxxxxxxxx> wrote in message
news:eVVCkp7EIHA.3940@xxxxxxxxxxxxxxxxxxxxxxx
I sniff with Ethereal and find from time to time an "Ethernet Trailer" of a
few bytes.
What porpose does it serve?

It pads out the frame to the minimum valid size.

Can someone indicate some reference in the Internet on that?

http://cnx.org/content/m0079/latest/

Regards

Galia





.

Relevant Pages

  • Re: center pull brakes stay on???
    ... rim setting. ... and tighteninng the brake on the frame with no luck. ... The pads may have worn down to the point that they catch under the rim ...
    (rec.bicycles.tech)
  • Re: Downtube mounted gear chager question.
    ... stops on the frame, ... slight recesses on the inside. ...  Not in very god condition, ... The pads are about 10mm.....just nipping out to the garage to ...
    (uk.rec.cycling)
  • Re: KH Moment Cranks, Q, and body twist
    ... so I was thinking the wheel was centered at the top of the frame ... The brakes, it turns ... relationship of the rim to the pads, not to the side of the frame. ...
    (rec.sport.unicycling)
  • Rubber grommets for internal cable housing
    ... Perhaps 'grommets' is not the correct terminology, but I'm looking for the little rubber doohickeys that serve as a seal for the frame where the rear brake cable enters and exits the frame. ...
    (rec.bicycles.tech)