capturing, sending packets with winpcap

Tech-Archive recommends: Fix windows errors by optimizing your registry

hi all,

I am trying to use winpcap to capture, send packets.

I found code from code project which uses dotnetWinpCap.dll for this
purpose. but it is not recognizing any packets, when ReceivePacket
method is called. can any one please tell me why it doesn't recognize.

is there any other way to capture, send packets and create log for the
received packets.

Thank you for your help in advance.

supriya

.

Relevant Pages

  • Re: Update: UDP 770 Potential Worm
    ... > were no packets indicating some form of replication. ... > my capture was limited due to the switched ... to see if the problem occurs on the test network, ... The proxy had already been isolated from the ...
    (Incidents)
  • Re: Continuous internet activity
    ... IP address out of the exercise (dest address for the packets). ... starts the capture. ... Wireshark is not running, and then it is "safe" to transmit ... There is a small probability of a networking problem, ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: Auditing / Logging
    ... to explicitly set these values and capture the text output seperately. ... The key is that dumping anything to console or making tcpdump generate ... wants in order to capture full packets, save them to disk, and go ...
    (Pen-Test)
  • flooding an embedded device with isic and tcpreplay causing different results
    ... I'm trying to force a reload of an embedded SOHO router/NAT Gateway. ... now I wondering why the tcpreplay attack don't f*** up the SOHO. ... The tcpdump isn't complete because of "dropped by kernel" packets - ... listening on eth0, link-type EN10MB, capture size ...
    (Pen-Test)
  • [TOOL] RPCAP, Remote Packet Capture System
    ... RPCAP is a Remote Packet Capture system. ... and uplink the captured packets to another ... the server which captures network traffic on a remote system, ... and a client, which receives and processes these packets. ...
    (Securiteam)