Re: How to stop WZC Service in XP-SP2

Tech-Archive recommends: Fix windows errors by optimizing your registry

Really , not that do disable for me inerface , but I was on the both sides
( user & kernel modes ) , so could check
if IOCTL come to my NDIS driver
Arkady

"John K Gummadi" <john@xxxxxxxxxx> wrote in message
news:OKEMsNZQFHA.3816@xxxxxxxxxxxxxxxxxxxxxxx
> Any clue Akardy?
>
> Thanks,
>
> - John.
>
> "John K Gummadi" <john@xxxxxxxxxx> wrote in message
> news:uCkXbSQQFHA.2584@xxxxxxxxxxxxxxxxxxxxxxx
>> This is the structure (I've changed as you said before).
>> BYTE various_extensions[12]; //I've added at the end
>> And
>> DWORD dwReserved; //I've added between nWepStatus and dwCtlFlags
>> ///////////////////////////////////////////////////////////
>> typedef struct
>> {
>> #if defined(MIDL_PASS)
>> [string] LPWSTR wszGuid;
>> #else
>> LPWSTR wszGuid;
>> #endif
>>
>> #if defined(MIDL_PASS)
>> [string] LPWSTR wszDescr;
>> #else
>> LPWSTR wszDescr;
>> #endif
>>
>> ULONG ulMediaState;
>> ULONG ulMediaType;
>> ULONG ulPhysicalMediaType;
>> INT nInfraMode;
>> INT nAuthMode;
>> INT nWepStatus;
>> DWORD dwReserved; //Added by john
>> DWORD dwCtlFlags; // control flags (see INTFCTL_* defines)
>> DWORD dwCapabilities; // capabilities flags (see INTFCAP_* defines)
>> RAW_DATA rdSSID; // encapsulates the SSID raw binary
>> RAW_DATA rdBSSID; // encapsulates the BSSID raw binary
>> RAW_DATA rdBSSIDList; // encapsulates one WZC_802_11_CONFIG_LIST
> structure
>> RAW_DATA rdStSSIDList; // encapsulates one WZC_802_11_CONFIG_LIST
> structure
>> RAW_DATA rdCtrlData; // data for various control actions on the
>> interface
>>
>> #ifdef UNDER_CE
>> BOOL bInitialized; // To track caller that freeing
>> // the same structure more than one time..
>> #endif
>>
>> DWORD nWPAMCastCipher;
>>
>> BYTE various_extensions[12]; //Added by John for XP SP2
>> } INTF_ENTRY, *PINTF_ENTRY;
>> ///////////////////////////////////////////////////////////
>>
>>
>> "Arkady Frenkel" <arkadyf@xxxxxxxxxxxxxxxx> wrote in message
>> news:OZ0I$KQQFHA.164@xxxxxxxxxxxxxxxxxxxxxxx
>> > Yes , that way ,but did you change the struct as in link I wrote, btw
> the
>> > function returned me error but did the job , I wrote about that
>> > Arkady
>> >
>> > "John K Gummadi" <john@xxxxxxxxxx> wrote in message
>> > news:uqIwC2PQFHA.3544@xxxxxxxxxxxxxxxxxxxxxxx
>> > > Hi Akardy,
>> > >
>> > > Yes, I did (I replied to your mail-id). Thanks agian. I've got one
> more
>> > > question, can you please have a look?
>> > > //////////////////////////////////// Code
>> > > ////////////////////////////////////////////////////
>> > > DWORD dwStatus = WZCQueryInterface(NULL, INTF_ALL, &ie, &dwOutFlags);
>> > > CString szDesc = ie.wszDescr;
>> > > msg.Format("StopWZCService: After WZCQueryInterface, \nwszDescr = %s
>> > > \nStatus = %d
>> > > \ndwOutFlags = %d \nCtlFlags = %d", szDesc, dwStatus,
>> > > dwOutFlags, ie.dwCtlFlags);
>> > > //Gives me Description properly! So, I assume WZCQueryInterface
>> > > worked
>> > > AfxMessageBox(msg);
>> > >
>> > > //Now, to disable WZC for this adapter, I do the following..
>> > > ie.dwCtlFlags &= ~INTF_ENABLED;
>> > > dwStatus = WZCSetInterface(NULL, INTF_ALL, &ie, &dwOutFlags);
>> > > msg.Format("StopWZCService: After WZCSetInterface, Status = %d
>> > > \ndwOutFlags
>> > > = %d \nCtlFlags = %d",
>> > > dwStatus, dwOutFlags, ie.dwCtlFlags);
>> > > AfxMessageBox(msg);
>> > >
>>
> ////////////////////////////////////////////////////////////////////////////
>> > > ////////////
>> > >
>> > > // WZCSetInterface returns zero (which I suppose is SUCCESS) but I
> still
>> > > can't get "IOCTL_NDISUIO_OPEN_DEVICE" to work. It returns 170 ("The
>> > > requested resource is in use.").
>> > >
>> > > Is this how I should be doing with WZCSetInterface? Am I missing
>> > > something?
>> > >
>> > > Thanks,
>> > >
>> > > John.
>> > >
>> > >
>> > > "Arkady Frenkel" <arkadyf@xxxxxxxxxxxxxxxx> wrote in message
>> > > news:e9TOpNPQFHA.2520@xxxxxxxxxxxxxxxxxxxxxxx
>> > >> I believe that you received the H :)
>> > >> Arkady
>> > >>
>> > >>
>> > >> "John K Gummadi" <john@xxxxxxxxxx> wrote in message
>> > >> news:eOXFdoOQFHA.1392@xxxxxxxxxxxxxxxxxxxxxxx
>> > >> > Thanks a lot for the help Akardy!
>> > >> >
>> > >> > -John.
>> > >> >
>> > >> > "Arkady Frenkel" <arkadyf@xxxxxxxxxxxxxxxx> wrote in message
>> > >> > news:O9vRFFOQFHA.3356@xxxxxxxxxxxxxxxxxxxxxxx
>> > >> >> Here raw_data , in a moment I'll send you the file
>> > >> >>
>> > >> >> Arkady
>> > >> >>
>> > >> >> //---------------------------------------
>> > >> >>
>> > >> >> // [P]RAW_DATA: generic description of a BLOB
>> > >> >>
>> > >> >> typedef struct
>> > >> >>
>> > >> >> {
>> > >> >>
>> > >> >> DWORD dwDataLen;
>> > >> >>
>> > >> >> #if defined(MIDL_PASS)
>> > >> >>
>> > >> >> [unique, size_is(dwDataLen)] LPBYTE pData;
>> > >> >>
>> > >> >> #else
>> > >> >>
>> > >> >> LPBYTE pData;
>> > >> >>
>> > >> >> #endif
>> > >> >>
>> > >> >> } RAW_DATA, *PRAW_DATA;
>> > >> >>
>> > >> >> "John K Gummadi" <john@xxxxxxxxxx> wrote in message
>> > >> >> news:O$KLXsNQFHA.1884@xxxxxxxxxxxxxxxxxxxxxxx
>> > >> >> > "wzcapi.h" please, anyone???
>> > >> >> >
>> > >> >> > "John K Gummadi" <john@xxxxxxxxxx> wrote in message
>> > >> >> > news:uIpJFGNQFHA.2972@xxxxxxxxxxxxxxxxxxxxxxx
>> > >> >> >> Akardy,
>> > >> >> >>
>> > >> >> >> I agian have compile problems with "RAW_DATA". Can you give me
>> the
>> > >> > header
>> > >> >> >> file (wzcapi.h ) please?
>> > >> >> >>
>> > >> >> >> My mail ID: john@xxxxxxxxxx
>> > >> >> >>
>> > >> >> >> Thanks,
>> > >> >> >>
>> > >> >> >> John.
>> > >> >> >>
>> > >> >> >>
>> > >> >> >> "John K Gummadi" <john@xxxxxxxxxx> wrote in message
>> > >> >> >> news:e1nlm0MQFHA.3704@xxxxxxxxxxxxxxxxxxxxxxx
>> > >> >> >> > Thanks a lot! Will bug you again if I get problems in
>> > >> >> >> > implementing
>> > >> > that
>> > >> >> >> :-)
>> > >> >> >> >
>> > >> >> >> > -John.
>> > >> >> >> >
>> > >> >> >> > "Arkady Frenkel" <arkadyf@xxxxxxxxxxxxxxxx> wrote in message
>> > >> >> >> > news:#93UfvMQFHA.3196@xxxxxxxxxxxxxxxxxxxxxxx
>> > >> >> >> > > That from wzcapi.h :
>> > >> >> >> > >
>> > >> >> >> > > //---------------------------------------
>> > >> >> >> > >
>> > >> >> >> > > // [P]INTF_ENTRY: contains everything an RPC client needs
> to
>> > > know
>> > >> >> >> > >
>> > >> >> >> > > // about an interface. It is used in conjunction with
>> > >> >> > RpcQueryInterface.
>> > >> >> >> > >
>> > >> >> >> > > // Flags below are to be used to specify what info is
> queried
>> > > for
>> > >> > the
>> > >> >> >> > >
>> > >> >> >> > > // interface. Guid field is not covered since this is the
> key
>> > >> >> >> > > of
>> > >> > the
>> > >> >> >> > >
>> > >> >> >> > > // structure so it has to be specified eather way.
>> > >> >> >> > >
>> > >> >> >> > > typedef struct
>> > >> >> >> > >
>> > >> >> >> > > {
>> > >> >> >> > >
>> > >> >> >> > > #if defined(MIDL_PASS)
>> > >> >> >> > >
>> > >> >> >> > > [string] LPWSTR wszGuid;
>> > >> >> >> > >
>> > >> >> >> > > #else
>> > >> >> >> > >
>> > >> >> >> > > LPWSTR wszGuid;
>> > >> >> >> > >
>> > >> >> >> > > #endif
>> > >> >> >> > >
>> > >> >> >> > > #if defined(MIDL_PASS)
>> > >> >> >> > >
>> > >> >> >> > > [string] LPWSTR wszDescr;
>> > >> >> >> > >
>> > >> >> >> > > #else
>> > >> >> >> > >
>> > >> >> >> > > LPWSTR wszDescr;
>> > >> >> >> > >
>> > >> >> >> > > #endif
>> > >> >> >> > >
>> > >> >> >> > > ULONG ulMediaState;
>> > >> >> >> > >
>> > >> >> >> > > ULONG ulMediaType;
>> > >> >> >> > >
>> > >> >> >> > > ULONG ulPhysicalMediaType;
>> > >> >> >> > >
>> > >> >> >> > > INT nInfraMode;
>> > >> >> >> > >
>> > >> >> >> > > INT nAuthMode;
>> > >> >> >> > >
>> > >> >> >> > > INT nWepStatus;
>> > >> >> >> > >
>> > >> >> >> > > DWORD dwCtlFlags; // control flags (see INTFCTL_* defines)
>> > >> >> >> > >
>> > >> >> >> > > DWORD dwCapabilities; // capabilities flags (see INTFCAP_*
>> > >> >> >> > > defines)
>> > >> >> >> > >
>> > >> >> >> > > RAW_DATA rdSSID; // encapsulates the SSID raw binary
>> > >> >> >> > >
>> > >> >> >> > > RAW_DATA rdBSSID; // encapsulates the BSSID raw binary
>> > >> >> >> > >
>> > >> >> >> > > RAW_DATA rdBSSIDList; // encapsulates one
>> > >> >> >> > > WZC_802_11_CONFIG_LIST
>> > >> >> >> structure
>> > >> >> >> > >
>> > >> >> >> > > RAW_DATA rdStSSIDList; // encapsulates one
>> > > WZC_802_11_CONFIG_LIST
>> > >> >> >> > structure
>> > >> >> >> > >
>> > >> >> >> > > RAW_DATA rdCtrlData; // data for various control actions
>> > >> >> >> > > on
>> the
>> > >> >> >> interface
>> > >> >> >> > >
>> > >> >> >> > > #ifdef UNDER_CE
>> > >> >> >> > >
>> > >> >> >> > > BOOL bInitialized; // To track caller that freeing
>> > >> >> >> > >
>> > >> >> >> > > // the same structure more than one time..
>> > >> >> >> > >
>> > >> >> >> > > #endif
>> > >> >> >> > >
>> > >> >> >> > > DWORD nWPAMCastCipher;
>> > >> >> >> > >
>> > >> >> >> > > } INTF_ENTRY, *PINTF_ENTRY;
>> > >> >> >> > >
>> > >> >> >> > > "John K Gummadi" <john@xxxxxxxxxx> wrote in message
>> > >> >> >> > > news:O%234FBsMQFHA.576@xxxxxxxxxxxxxxxxxxxxxxx
>> > >> >> >> > > > Thanks Akardy,
>> > >> >> >> > > >
>> > >> >> >> > > > I have read that topic and what I need is the basic
>> structure
>> > >> >> > itself.
>> > >> >> >> > This
>> > >> >> >> > > > is what you mentioned there:
>> > >> >> >> > > > typedef struct {
>> > >> >> >> > > > // all data here
>> > >> >> >> > > > BYTE various_extensions[12];
>> > >> >> >> > > > } INTF_ENTRY;
>> > >> >> >> > > >
>> > >> >> >> > > > Can you please give me the original structure (including
>> "all
>> > >> >> >> > > > data")
>> > >> >> >> > > > please?
>> > >> >> >> > > >
>> > >> >> >> > > > Thanks,
>> > >> >> >> > > >
>> > >> >> >> > > > John.
>> > >> >> >> > > >
>> > >> >> >> > > >
>> > >> >> >> > > > "Arkady Frenkel" <arkadyf@xxxxxxxxxxxxxxxx> wrote in
>> message
>> > >> >> >> > > > news:OrYVUnMQFHA.4020@xxxxxxxxxxxxxxxxxxxxxxx
>> > >> >> >> > > >> wzcsapi.h in CE you can have only if you have platform
>> > > builder
>> > >> > and
>> > >> >> >> not
>> > >> >> >> > > >> eVC
>> > >> >> >> > > >> (eVT ) and that the same for XP up to SP2 , where the
>> struct
>> > >> >> >> > > >> was
>> > >> >> >> > changed
>> > >> >> >> > > >> ,
>> > >> >> >> > > >> look at
>> > >> >> >> > > >>
>> > >> >> >> > > >
>> > >> >> >> >
>> > >> >> >>
>> > >> >> >
>> > >> >
>> > >
>>
> http://groups-beta.google.com/group/microsoft.public.win32.programmer.networ
>> > >> >> >> > > >
>> > >> >> >> >
>> > >> >> >>
>> > >> >> >
>> > >> >
>> > >
>>
> ks/browse_thread/thread/8ca9722da4870f0a/a925a934bc215987?q=arkadyf+INTF_ENT
>> > >> >> >> > > > RY&rnum=2#a925a934bc215987
>> > >> >> >> > > >> Arkady
>> > >> >> >> > > >>
>> > >> >> >> > > >> "John K Gummadi" <john@xxxxxxxxxx> wrote in message
>> > >> >> >> > > >> news:eD3M12DQFHA.3928@xxxxxxxxxxxxxxxxxxxxxxx
>> > >> >> >> > > >> > Hello All,
>> > >> >> >> > > >> >
>> > >> >> >> > > >> > I'm working on a WiFi tool that scans, connects to
>> > >> > accesspoints,
>> > >> >> >> > etc.,
>> > >> >> >> > > > So
>> > >> >> >> > > >> > far on XP SP1, I'm able to stop WZC before my app (by
>> > > simply
>> > >> >> >> > executing
>> > >> >> >> > > >> > "net
>> > >> >> >> > > >> > stop wzcsvc"). It stops successfully and I'm able to
> get
>> > >> > handle
>> > >> >> > to
>> > >> >> >> > the
>> > >> >> >> > > >> > WLAN
>> > >> >> >> > > >> > adapter and I could send different commands to set
>> > >> >> >> > > >> > WEP
>> > >> >> >> > > >> > key,
>> > >> >> >> connect,
>> > >> >> >> > > > etc.,
>> > >> >> >> > > >> >
>> > >> >> >> > > >> > OK, now when I do the same in SP2 machine, though the
>> WZC
>> > >> >> >> > > >> > service
>> > >> >> >> > > > appears
>> > >> >> >> > > >> > have stopped, I can't get IOCTL_NDISUIO_OPEN_DEVICE
>> > >> >> >> > > >> > to
>> > >> >> >> > > >> > work
>> > >> > with
>> > >> >> >> > > >> > DeviceIOControl. I get some error that says something
>> like
>> > > it
>> > >> > is
>> > >> >> > in
>> > >> >> >> > use
>> > >> >> >> > > >> > already. And I read in newgroups that from SP2,
>> microsoft
>> > >> >> >> > > >> > stopped
>> > >> >> >> > > > allowing
>> > >> >> >> > > >> > people from stopping the service. And also came to
> know
>> > > that
>> > >> > it
>> > >> >> > is
>> > >> >> >> > > >> > possible
>> > >> >> >> > > >> > to stop it using WZCQueryInterface and
> WZCSetInterface.
>> > >> >> >> > > >> > Though
>> > >> > I
>> > >> >> >> have
>> > >> >> >> > > > the
>> > >> >> >> > > >> > prototypes of these two functions, I'm unable to get
> the
>> > >> >> > definition
>> > >> >> >> > of
>> > >> >> >> > > >> > INTF_ENTRY. I searched google for "wzcsapi.h" (where
>> > >> >> >> > > >> > i
>> > >> >> >> > > >> > hope
>> > >> >> >> > > >> > to
>> > >> >> > find
>> > >> >> >> > the
>> > >> >> >> > > >> > definition of INTF_ENTRY) without any luck. I don;t
> have
>> > >> >> >> > > >> > WinCE
>> > >> >> >> > > >> > installed
>> > >> >> >> > > >> > on
>> > >> >> >> > > >> > my machine. Can someone send me "wzcsapi.h" please?
>> > >> >> >> > > >> > If
>> > >> >> >> > > >> > not,
>> > >> >> > atleast
>> > >> >> >> > > >> > definition of INTF_ENTRY.
>> > >> >> >> > > >> >
>> > >> >> >> > > >> > Any suggestions, pointers, source-code samples will
>> > >> >> >> > > >> > be
>> of
>> > >> > great
>> > >> >> >> help.
>> > >> >> >> > > >> >
>> > >> >> >> > > >> > Thanks,
>> > >> >> >> > > >> >
>> > >> >> >> > > >> > John.
>> > >> >> >> > > >> >
>> > >> >> >> > > >> >
>> > >> >> >> > > >> >
>> > >> >> >> > > >>
>> > >> >> >> > > >>
>> > >> >> >> > > >
>> > >> >> >> > > >
>> > >> >> >> > >
>> > >> >> >> > >
>> > >> >> >> >
>> > >> >> >> >
>> > >> >> >>
>> > >> >> >>
>> > >> >> >
>> > >> >> >
>> > >> >>
>> > >> >>
>> > >> >
>> > >> >
>> > >>
>> > >>
>> > >
>> > >
>> >
>> >
>>
>>
>
>


.

Relevant Pages

  • Re: How to stop WZC Service in XP-SP2
    ... > LPWSTR wszGuid; ... > ULONG ulMediaState; ... > INT nInfraMode; ... >> typedef struct { ...
    (microsoft.public.win32.programmer.networks)
  • Re: How to continue debugging into kernel code?
    ... > The original idea was to hook interrupt handler not replace ... > parameters from stack... ... the next thing in ntdll.dll after int 2e is ret 2c ...
    (microsoft.public.win32.programmer.kernel)
  • Re: Socket receive question
    ... That is what called optimization:) ... Arkady ... >A liitle hint, I guess you need to do following: ... > int j=socket.Receive; ...
    (microsoft.public.win32.programmer.networks)
  • Re: GetThreadTimes...
    ... Arkady ... >> Windows can't rely on these new features of PII or above CPUs. ...
    (microsoft.public.win32.programmer.kernel)