Re: How to connect multiple DV camcorders to Windows?

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

The problem may come from your IEE1394 card, because the two
connections are using the same resources from a single card (Or maybe
you are using ports which are on the motherboard). Normally, you
should be able to support all ports running together (I have a card
with 3 ports and have been running all 3 with DV connections at the
same time), but your card might be underpowered.
You might have to install an additional ieee1394 card to be able to
support properly the second DV camera..

.

Relevant Pages

  • Re: TOP Network Interface Port of a Sun Ultra 30
    ... up to 16 serial connections again, ... I was told that it would connect to one of the free computer ports on ... significant speed difference if I were to connect this to a network card ... way beside an Ultra-10 when it was one of the two web servers (now I ...
    (comp.sys.sun.hardware)
  • Re: [RFC/CFT] Split 8250 port table (part 2)
    ... The only ports which remain in asm-*/serial.h are the platform specific ... * The following define the access methods for the HUB6 card. ... the interrupt is at irq3 ...
    (Linux-Kernel)
  • Process in biowr state
    ... I setup the card from another machine, then booted it, and then wanted to install the manpage distribution. ... miibus0: on vr0 ... miibus1: on vr1 ... usb1: companion controller, 4 ports each: usb0 ...
    (freebsd-questions)
  • Re: 1-wire to USB converter that can use 1820s directly
    ... than to need to add another PCI card to support serial ports. ... how someone could finally say "not one more f'ing wire!" ...
    (comp.home.automation)
  • Re: ARCHIEVE, RESTORE and flag handling
    ... it does not clear ports 1-3. ... Is the entire backup segregated into a directory ... The idea is to take a formatted SD card and make a copy ... from where it could be executed, ending with RESTORE; ...
    (comp.sys.hp48)