Re: Help with USB driver
- From: sam <sam@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Wed, 24 Jun 2009 10:47:02 -0700
Hi Pavel
thanks a lot for your reply..
I am still looking for specific windows API's or example code that can
identify the various partitions on the USB and the disk letters associated
with each partition
Also I dont want to use the vendor configuration utility and use only
windows APIs to change the read-only partition to be read-writable.. I want
this functionality to be independent of the vendor. The usb i have is a
general purpose mass storage device..
thanks
Sameer
"Pavel A." wrote:
sam wrote:.
Hi
I am a C/C++ programmer and am trying to do windows driver development for
the first time
What I am trying to achieve is the following..
I have a USB mass storage device with two partions on it (one read
only and other read-write).. I want to write a C++ (or C) utility that
can run in user mode and provide me the following information
The drive letters assigned to the two partitions of the USB
A lot of information on this can be found here:
http://www.uwe-sieber.de/usbstick_e.html
Some sort of functionality to change the read-only partition to read-
write and vice versa. ( Not sure if it is do-able in user-mode..)
For this, you need a configuration utility from the device manufacturer.
Regards,
--pa
- Follow-Ups:
- Re: Help with USB driver
- From: Chris
- Re: Help with USB driver
- References:
- Help with USB driver
- From: sam
- Re: Help with USB driver
- From: Pavel A.
- Help with USB driver
- Prev by Date: Re: Tdi Bluescreen
- Next by Date: Re: WDDK and signing drivers
- Previous by thread: Re: Help with USB driver
- Next by thread: Re: Help with USB driver
- Index(es):
Relevant Pages
|