Re: Why can't the view of AMCap update ?

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: "shinji" <watashin_NO_SPAM@xxxxxxxxxxxxx>
Date: Mon, 2 Jun 2008 08:35:23 +0900

Thanks for your reply

> It sounds like you have an issue handling the preview pin.

I removed preview pin from bt848 source code.
I think only capture pin is enough for streaming.

The Bt878 driver in the Win98 DDK was a Video For Windows driver. Is that
really what you created?

yes.
But I modified many code.

Were you not aware that there is a very good,
modern, open source WDM driver for the Bt848/878 at
btwincap.sourceforge.net?

yes, I aware it.
This is more good code, isn't this.
But I think this code is very complecated.
Because This code supported many capture cards.

I will look it.

shinji

.

Follow-Ups:
- Re: Why can't the view of AMCap update ?
  - From: Tim Roberts

Prev by Date: Re: Calls between Kernel mode drivers
Next by Date: Where is the MSI-X example?
Previous by thread: Re: How to block system copy commands at driver level
Next by thread: Re: Why can't the view of AMCap update ?
Index(es):
- Date
- Thread

Relevant Pages

Re: Missing Preview at full resolution & Time Stamp stripped
... >Capture Pin over the Preview Pin. ... >the user is trying to capture at full frame rate and resolution. ... >Smart Tee and Infinite Tee, and connecting them to the Capture Pin. ...
(microsoft.public.win32.programmer.directx.video)
Re: Troubles with PIC 16F88
... I am currently using CCS C ... > for the location of the source code and spits out a hex file. ... > might need to feed pin 4 high, or low, to keep the device from ... the LED has a barely detectable blink to it, ...
(sci.electronics.design)
Re: graphedit and code generation
... > where could I find a sample code demonstrating how to use infinite tee? ... AFAIK, you just add the Inf Tee, connect it to the source filter, and then ... There was no preview pin available, so the capture pin output ...
(microsoft.public.win32.programmer.directx.video)
Re: video capture buffered with sample grabber and passed to TCP/I
... our source is from Video capture. ... I would get delay in capture pin after being connected to Encoder, ... I want to see videos from many remote hosts over the network. ...
(microsoft.public.win32.programmer.directx.video)
Re: video capture buffered with sample grabber and passed to TCP/IP
... our source is from Video capture. ... I would get delay in capture pin after being connected to Encoder, ... I want to see videos from many remote hosts over the network. ...
(microsoft.public.win32.programmer.directx.video)