Illegal instruction - code c000001d (!!! second chance !!!)
- From: vijayaraju.k@xxxxxxxxx
- Date: Thu, 27 Dec 2007 10:27:46 -0800 (PST)
Hi Experts,
I have developed a USB-UART Single KMDF driver for TUSB3410 Device.
The device appears as Virtual Com Port in Device manager. I have both
the Build versions for this driver Checked and Release. When I loaded
the Checked Build versions of the driver Everything seems to be good
and device works as expected. Device Open,close,init and Un-init
everything works very well including File transfers in Hyper terminal,
invidual Reads and Writes.
But my problem is when I try to load the Free Build version of the
Driver the system crashes with following last line of Error:
Illegal instruction - code c000001d (!!! second chance !!!)
f88d4dde 8d ???
and the crash dump for this driver is as follows:
*******************************************************************************
*
*
* Bugcheck
Analysis *
*
*
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck FC, {f88d4ddc, 2eed163, f88d4d64, 0}
Probably caused by : Wdf01000.sys ( Wdf01000!
FxRequestBase::CompleteSubmitted+89 )
Followup: MachineOwner
---------
kd> !analyze -v
*******************************************************************************
*
*
* Bugcheck
Analysis *
*
*
*******************************************************************************
ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)
An attempt was made to execute non-executable memory. The guilty
driver
is on the stack trace (and is typically the current instruction
pointer).
When possible, the guilty driver's name (Unicode string) is printed on
the bugcheck screen and saved in KiBugCheckDriver.
Arguments:
Arg1: f88d4ddc, Virtual address for the attempted execute.
Arg2: 02eed163, PTE contents.
Arg3: f88d4d64, (reserved)
Arg4: 00000000, (reserved)
Debugging Details:
------------------
DEFAULT_BUCKET_ID: DRIVER_FAULT
BUGCHECK_STR: 0xFC
PROCESS_NAME: System
TRAP_FRAME: f88d4d64 -- (.trap 0xfffffffff88d4d64)
ErrCode = 00000011
eax=c0000016 ebx=00000000 ecx=00000000 edx=00000002 esi=7dfe1fe8
edi=8233b8fc
eip=f88d4ddc esp=f88d4dd8 ebp=824b76d0 iopl=0 nv up ei pl zr
na pe nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000
efl=00010246
f88d4ddc 044e add al,4Eh
Resetting default scope
LAST_CONTROL_TRANSFER: from 8051c0d3 to 804f8aef
STACK_TEXT:
f88d4cec 8051c0d3 000000fc f88d4ddc 02eed163 nt!KeBugCheckEx+0x1b
f88d4d4c 8053f90c 00000008 f88d4ddc 00000000 nt!MmAccessFault+0x8e7
f88d4d4c f88d4ddc 00000008 f88d4ddc 00000000 nt!KiTrap0E+0xcc
WARNING: Frame IP not in any known module. Following frames may be
wrong.
f88d4ddc aa030245 7db48928 7db3f600 8233b8fc 0xf88d4ddc
f88d4e04 aa0075d3 827aa51b 824c09f8 00000000 Wdf01000!
FxRequestBase::CompleteSubmitted+0x89
f88d4e20 aa00768d 014b76d0 8236e928 f88d4e4c Wdf01000!
FxIoTarget::RequestCompletionRoutine+0x195
f88d4e30 804ef5ed 00000000 827aa460 824b76d0 Wdf01000!
FxIoTarget::_RequestCompletionRoutine+0x35
f88d4e4c 804f054c 00000000 827aa460 8236e928 nt!IopUnloadSafeCompletion
+0x1d
f88d4e7c f7f51ee5 827aa460 81c0fe10 82750028 nt!IopfCompleteRequest
+0xa2
f88d4ee4 f7f52b57 81fee4d8 00000000 827507d8 USBPORT!
USBPORT_CompleteTransfer+0x373
f88d4f14 f7f53754 026e6f44 827500e0 827500e0 USBPORT!
USBPORT_DoneTransfer+0x137
f88d4f4c f7f54f6a 82750028 80541ac8 82750230 USBPORT!
USBPORT_FlushDoneTransferList+0x16c
f88d4f78 f7f62fb0 82750028 80541ac8 82750028 USBPORT!USBPORT_DpcWorker
+0x224
f88d4fb4 f7f63128 82750028 00000001 82489008 USBPORT!
USBPORT_IsrDpcWorker+0x37e
f88d4fd0 80540f7d 8275064c 6b755044 00000000 USBPORT!USBPORT_IsrDpc
+0x166
f88d4ff4 80540c4a f8930c18 00000000 00000000 nt!KiRetireDpcList+0x46
f88d4ff8 f8930c18 00000000 00000000 00000000 nt!KiDispatchInterrupt
+0x2a
80540c4a 00000000 00000009 bb835675 00000128 0xf8930c18
STACK_COMMAND: kb
FOLLOWUP_IP:
Wdf01000!FxRequestBase::CompleteSubmitted+89
aa030245 eb0c jmp Wdf01000!
FxRequestBase::CompleteSubmitted+0x97 (aa030253)
SYMBOL_STACK_INDEX: 4
SYMBOL_NAME: Wdf01000!FxRequestBase::CompleteSubmitted+89
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: Wdf01000
IMAGE_NAME: Wdf01000.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4549b23a
FAILURE_BUCKET_ID: 0xFC_Wdf01000!FxRequestBase::CompleteSubmitted+89
BUCKET_ID: 0xFC_Wdf01000!FxRequestBase::CompleteSubmitted+89
Followup: MachineOwner
Can anybody help me in this regard? I don't know How to debug further
and what to do next as the error is not in my driver?
Please somebody help me to get rid of this problem, It is very urgent
for me.
Your valuable suggestions are always appreciable.
Thanks in advance.
~Vijji
.
- Follow-Ups:
- Re: Illegal instruction - code c000001d (!!! second chance !!!)
- From: Ivan Brugiolo [MSFT]
- Re: Illegal instruction - code c000001d (!!! second chance !!!)
- Prev by Date: Re: [printer rendering driver] KERNEL_MODE_EXCEPTION_NOT_HANDLED in vSrcCopyS24D24Identity
- Next by Date: Re: DxgkInitialize call in WDDM display architecture
- Previous by thread: devenv nmake project building driver fails - VS 2005
- Next by thread: Re: Illegal instruction - code c000001d (!!! second chance !!!)
- Index(es):
Relevant Pages
|
