how to get USB device attachment information

Hi, all
Is there a way to obtain some attachment information from a
usb function driver, such as the hub's hardware id, symbolic name,
connection port index , bus addresses of this device and the upstream
hub?
woodhead

.

Relevant Pages

  • Re: ANSI C question about volatile
    ... The *intent* of the C Standard is clear: the hardware has some ... Only one "bus width" is supported, ... the register numbers might change in the process). ... programmer might use the "bis" or "bic" instructions on the VAX: ...
    (comp.lang.c)
  • Re: [PATCH 29/30] W1: Documentation/w1/masters/ds2490 update
    ... DS9490is a USB W1 bus master device ... +- While the ds2490 supports a hardware search the code doesn't take ... a write buffer and a read buffer as arguments. ... the bulk read will return an error and the hardware will ...
    (Linux-Kernel)
  • [PATCH 32/33 replaces 34/35] Documentation/w1/masters/ds2490 update
    ... DS9490is a USB W1 bus master device ... +- The hardware will detect when devices are attached to the bus on the ... a write buffer and a read buffer as arguments. ... the bulk read will return an error and the hardware will ...
    (Linux-Kernel)
  • [PATCH 34/35] W1: Documentation/w1/masters/ds2490 update
    ... DS9490is a USB W1 bus master device ... +- The hardware will detect when devices are attached to the bus on the ... a write buffer and a read buffer as arguments. ... the bulk read will return an error and the hardware will ...
    (Linux-Kernel)
  • Re: Intel 845PE and idebus=66?
    ... > I have a question I hope the hardware gurus can answer. ... Passing the "idebus=66" parameter will make the kernel think the IDE ... controller is _on_ a 66MHz bus (i.e., the kernel will think it talks to ... Notice how it explicitly says "for PIO modes". ...
    (comp.os.linux.hardware)