Re: Stop ERROR codes

Tech-Archive recommends: Fix windows errors by optimizing your registry

GV,

I finally got out of the endless loop and reformated. Yeah!

THE BAD NEWS-- I have another computer with BSOD and stop errors. How do I
access the minidump?

I found it using the search feature, but could not open the minidump. I
would like to resolve the problem without reformatting.

Thanks,
Susan

"Gianluca Varenni" wrote:

You need to look at the minidumo or crash dump files and understand what is
the faulty driver causing all these crashes.

Have you tried looking at them?

Have a nice day
GV

"wish I wuz smart!" <wishIwuzsmart@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:F62362C5-DA2E-4F6F-80D5-C9BB74DDA0B4@xxxxxxxxxxxxxxxx
Stop ERROR codes

Does anyone have access to this? "full list of bug check codes, see the
bugcodes.h file. This file can be found in the inc directory of the
Microsoft
Windows Driver Kit (WDK)." Please help me decipher these codes.

After trying to do "repair" installation of XP Media Center 2005, I
received
the following information:
DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS
0x000000CE: (0xF6B9965E, 0x00000008, 0xF6B9965E, 0x00000000)

My desktop is in an endless loop; Install drivers to BSOD to Install
drivers. I turned it off. I would like to stop the endless loop, and
move
onto a complete reinstall. I have already completed my backups.

Before trying to "repair" BSOD's were:

12-6-06 DESKTOP BSOD
IRQL_NOT_LESS_OR_EQUAL
Error Signature
BCCode : a BCP1 : 00000014 BCP2 : 00000002 BCP3 : 00000000
BCP4 : 804F1322 OSVer : 5_1_2600 SP : 2_0 Product : 256_1

12-5-06 DESKTOP BSOD
Error Signature
BCCode : d1 BCP1 : 371F9A58 BCP2 : 00000002 BCP3 : 00000001
BCP4 : 8678B7AC OSVer : 5_1_2600 SP : 2_0 Product : 256_1

Please help me get out of this endless loop!!!

Thanks,
Wishing




.

Relevant Pages

  • Re: Botched XP "Repair"
    ... I finally got out of the endless loop by using F12 ... I have installed IE7 incorrectly and that is when the first BSOD ... I would like to resolve this without reformatting. ... I am not requesting instructions for performing a clean install. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: BSOD ! - Multiple_irp_comlete_request
    ... BSOD still occuring on about 75% of start-ups. ... Error message is still exactly the same as my first post. ... but not with the driver issues ... You can access Event Viewer by selecting Start, Control Panel, ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: BulkUSB driver unstable on Laptop w/XP
    ... Upon further review of that code (again this is right out of the BulkUSB examples in the DDK) I can see where a newly arriving device might not be ready for the calls being made in AbortPipes. ... When I started I followed the Oney recommendations and selected a sample driver to start from. ... More recently I have replaced my development machine (the win2k laptop) with a new a new XP laptop. ... Before I enabled legacy support in the laptop firmware I got the BSOD whenever the device was attached...even on reboot. ...
    (microsoft.public.development.device.drivers)
  • Re: Blue Kiss of Death Crash on Boot Up
    ... I don't think that the Event-Log Error ID 7000 relating to Service Control ... Manager has anything to do with the BSOD. ... "A driver tried to access [i. e. ... The above is the normal boot pattern before & after the BSOD, ...
    (microsoft.public.windows.mediacenter)
  • Re: BSOD ! - Multiple_irp_comlete_request
    ... Can you please post a copy of the latest Stop Error message? ... Unfortunatly the BSOD has reoccured!, but not with the driver issues ... You can access Event Viewer by selecting Start, Control Panel, ...
    (microsoft.public.windowsxp.help_and_support)