Re: Filter Hook

IIRC, IP filter driver should process these packets through the callback routine instead of submitting the IRP to the lower tcpip protocol driver. Why do you need to pass the IRPs and wait for its completion?


x856256@xxxxxxxxx дµÀ:
Hello,

Either queueing the job or doing it asynchronously I will have to do
the job in another thread, and wait for the process of the packet to
finish (in order to return the drop, forward or pass reply), and this
is exactly where my problem began, when I tried to use the
KeWaitForSingleObject function.
So let me ask this again: How can I use this wait function, or any
other substitution that will allow me process the packet on another
thread (queued or not) and wait for it to finish processing in order to
return the value?

Thanks,
Guy

Doron Holan [MS] wrote:
you can't reduce IRQL inline, you can only raise it and then lower it. if
you truly want to synchronously process soemthing, then queue it to a work
item. if you want your filter to not negatively affect performance, learn
how to process the results in the completion routine asynchronously

d

--
Please do not send e-mail directly to this alias. this alias is for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no rights.


<x856256@xxxxxxxxx> wrote in message
news:1154873993.596484.241370@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
No,

The code is not taking any spinlocks.
Anyone has an idea how can I reduce the IRQL level inside the filter
hook function?

Thanks,
Guy

Don Burn wrote:
You cannot call a lot of functions at DISPATCH_LEVEL. I am not well
versed
in filter hooks, so you need to determine if the raising to DISPATCH is
avoidable. For instance, if the code takes a spinlock, could it take an
ERESOURCE instead.


--
Don Burn (MVP, Windows DDK)
Windows 2k/XP/2k3 Filesystem and Driver Consulting
http://www.windrvr.com
Remove StopSpam from the email to reply



<x856256@xxxxxxxxx> wrote in message
news:1154861486.219608.122660@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hello and thanks Don for the answer.

It is running in IRQL_DISPATCH, I will try to reduce it and see what
happens.

Thanks,
Guy

Don Burn wrote:
A filter hook driver should not have an interrupt handler it is only
concerned with packets as they are presented to it. You should not
try
to
use IoConnectInterrupt with a software interrupt.

What IRQL are you running at when you crash, a common problem here
would
be
calling the functions you mentioned at IRQL_DISPATCH or higher.


--
Don Burn (MVP, Windows DDK)
Windows 2k/XP/2k3 Filesystem and Driver Consulting
http://www.windrvr.com
Remove StopSpam from the email to reply



<x856256@xxxxxxxxx> wrote in message
news:1154814887.364085.142850@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hi,

Drivers are very new to me, can someone help me with the next issue
please:

I have tried to set up a Filter Hook driver.
I took an example code from codeproject (DrvFltIp) and it works ok
on
my computer (Windows XP).

When I try to process the packets more thoroughly than in this
example
code, my computer crashed (freezes or restarts immediately).
The crash happens when I do something that involves a
KeWaitForSingleObject or a KeDelayExecutionThread call (but I am not
sure these are the only scenarios that cause a crash).

I looked in the dump file with WinDbg after the crash and saw that
one
of the last actions of the kernel were sending an interrupt and
afterwards an exception. So my guess was that the kernel is sending
a
trap that was sent to it by the hardware to my driver to handle, but
since I didn't set up an interrupt call back function, an exception
is
raised.
The next thing I did was to try and set up an interrupt call back
function, but this also caused a similar crash to the system (when I
tried to pull out the parameters that I have to pass to the function
"IoConnectInterrupt" from the isrStack). I tried to call the
function
"IoConnectInterrupt" from the function
"DriverObject->MajorFunction[IRP_MJ_CREATE]" when got
"IRP_MJ_CREATE"
in "irpStack->MajorFunction" or when I got "IRP_MN_START_DEVICE IRP"
in
"irpStack->MinorFunction". When I tried even to access the parameter
"irpStack->Parameters->StartDevice.AllocatedResourcesTranslated->Count"
(even without calling "IoConnectInterrupt") it caused a crash.

If anyone can help me understand what I am doing wrong, and why I am
getting all these crashes I would be grateful.

Thanks,
Guy


.

Relevant Pages

  • Re: Filter Hook
    ... the callback routine is been invoked at DISPATCH_LEVEL. ... If you really have to keep such a queue for the packets, then the IP filter driver is not suitable for your needs since you have to process all the packets in the callback routine without any wait actionand return it to the tcpip driver immediately when the callback routine returns. ... What IRQL are you running at when you crash, ...
    (microsoft.public.development.device.drivers)
  • Re: Filter Hook
    ... a bad idea, it means I should do all the processing in the driver, and ... somewhere because my packet process depends on other packets that were ... Windows 2k/XP/2k3 Filesystem and Driver Consulting ... What IRQL are you running at when you crash, ...
    (microsoft.public.development.device.drivers)
  • Re: MouseFilter
    ... Generally SendInput works about as well as sending packets from a driver. ... Anyway, even a filter driver can't do that, because another mouse filter driver could stop whatever you're doing. ...
    (microsoft.public.development.device.drivers)
  • Re: MouseFilter
    ... The idea is to simulate mousemovement in any windows program or Directxinput ... I wanted to try it with a filter but come to think about it im not sure ... > Generally SendInput works about as well as sending packets from a driver ...
    (microsoft.public.development.device.drivers)
  • Re: BDA driver for USB Tuner device.
    ... Capture filter is the one which deals with data stream from the ... TheBDAminidriver will BE theUSBclient driver. ... then extract the IP packets from the TS packets and give it ot BDA IP ... extract the IP packets and tried sending it to IP Sink filter. ...
    (microsoft.public.development.device.drivers)