microsoft.public.development.device.drivers

• Thread Index

---

• Lower Filter Driver Questions
  • From: sleeper
• [KMDF USB] Who is responsible for zero-length packet termination of bulk write?
  • From: chris . aseltine
• Re: Virtual serial port
  • From: Abhishek R [MSFT]
• Re: Windows 2000 and Vista USB driver issues
  • From: chris . aseltine
• passthru
  • From: postman
• Windows DDK sample portio
  • From: Albert Gomez
• Re: Bluetooth HID Lower Filter
  • From: Steven Bennett
• Re: Valider un driver pour une carte PCI
  • From: Calvin Guan
• Re: tool help
  • From: Maxim S. Shatskih
• Windows 2000 and Vista USB driver issues
  • From: wilhelm . lundgren
• Re: Strange issue with NDISPROT xmit and network the performance counter
  • From: Stephan Wolf [MVP]
• Re: How WMI ?numerates serial ports?
  • From: Doron Holan [MS]
• Re: KMDF NDIS <==> USB driver
  • From: Doron Holan [MS]
• Re: Extra reference?
  • From: Doron Holan [MS]
• Valider un driver pour une carte PCI
  • From: pitbul0169
• I was writing an USB DLL file
  • From: Morris Chang
• KMDF NDIS <==> USB driver
  • From: miki
• Re: Strange issue with NDISPROT xmit and network the performance counter
  • From: Valeriy Glushkov
• Re: BUGCODE_USB_DRIVER - Arg1=0x05
  • From: greg1x
• Re: BUGCODE_USB_DRIVER - Arg1=0x05
  • From: greg1x
• Re: Strange issue with NDISPROT xmit and network the performance counter
  • From: Stephan Wolf [MVP]
• Re: After enabling driver, restart system
  • From: Stephan Wolf [MVP]
• Re: Winsock layered hook driver as a gateway
  • From: Stephan Wolf [MVP]
• Re: Extra reference?
  • From: Stephan Wolf [MVP]
• Strange issue with NDISPROT xmit and network the performance counter
  • From: Valeriy Glushkov
• Re: TdiBuildReceive question
  • From: hanzhu
• Re: TdiBuildReceive question
  • From: Maxim S. Shatskih
• Re: [long] Win2k USBtoCOM driver crash at usbd.sys
  • From: Calvin Guan
• Re: TdiBuildReceive question
  • From: hanzhu
• Re: After enabling driver, restart system
  • From: Doron Holan [MS]
• Re: Bluetooth HID Upper Filter
  • From: Doron Holan [MS]
• Re: [long] Win2k USBtoCOM driver crash at usbd.sys
  • From: Doron Holan [MS]
• Re: PLX PCI9656 driver developing problem
  • From: Eliyas Yakub [MSFT]
• Re: TdiBuildReceive question
  • From: Maxim S. Shatskih
• Re: Winsock layered hook driver as a gateway
  • From: Maxim S. Shatskih
• Re: tool help
  • From: Maxim S. Shatskih
• Re: BUGCODE_USB_DRIVER - Arg1=0x05
  • From: Maxim S. Shatskih
• Re: Query : Creating File system
  • From: Maxim S. Shatskih
• Re: BUGCODE_USB_DRIVER - Arg1=0x05
  • From: greg1x
• Winsock layered hook driver as a gateway
  • From: M.A.H
• Re: 1394 OHCI Port Driver API
  • From: r_konjeti
• Re: Uninstall Driver in C#
  • From: Michael
• Re: BUGCODE_USB_DRIVER - Arg1=0x05
  • From: greg1x
• Re: Uninstall Driver in C#
  • From: Stephan Wolf [MVP]
• Re: tool help
  • From: Gary G. Little
• install unsigned driver with DifxApp.wixlib
  • From: Rach
• Re: KMDF's NONPNP sample question.
  • From: Don Burn
• TdiBuildReceive question
  • From: hanzhu
• test
  • From: Hablu
• Re: Regarding KeInitializeSpinLock
  • From: wilhelm . lundgren
• Re: Bug in NTFS - date values are preserved
  • From: atlan@xxxxxxxxxxxx
• W2K SP2 USB/RNDIS assertion failure.
  • From: fgo
• Mirror driver wont unload
  • From: voidcoder
• BUGCODE_USB_DRIVER - Arg1=0x05
  • From: greg1x
• [long] Win2k USBtoCOM driver crash at usbd.sys
  • From: Maksymilian Dutka
• Re: What should I do in AVStrMiniPinProcess() function without using DMA?
  • From: Lichfeng
• Re: How to call Parallel Port driver dispatch routine
  • From: Doron Holan [MS]
• Re: Query : Creating File system
  • From: David J. Craig
• Re: What should I do in AVStrMiniPinProcess() function without using DMA?
  • From: Tim Roberts
• Re: USB Drive Emulation
  • From: Robert Marquardt
• Re: How to call Parallel Port driver dispatch routine
  • From: Calvin Guan
• Re: How to call Parallel Port driver dispatch routine
  • From: Leo Havmøller
• Re: Bug in NTFS - date values are preserved
  • From: Doron Holan [MS]
• Re: USB Drive Emulation
  • From: Doron Holan [MS]
• Uninstall Driver in C#
  • From: Michael
• Re: Bug in NTFS - date values are preserved
  • From: Code Jockey
• Question about signing drivers
  • From: Ondrej Slanina
• Re: Bug in NTFS - date values are preserved
  • From: Maxim S. Shatskih
• Re: USB Drive Emulation
  • From: Maxim S. Shatskih
• USB Drive Emulation
  • From: jasoncornellier
• Re: Determine OS support from INF
  • From: Jerry West
• Re: display driver do not unload , when window media player is running
  • From: Ivan Brugiolo [MSFT]
• Re: Regarding KeInitializeSpinLock
  • From: Doron Holan [MS]
• Bug in NTFS - date values are preserved
  • From: atlan
• Virtual Graphics Adapter driver support for reverse resolution.
  • From: anshul
• Re: Regarding KeInitializeSpinLock
  • From: Mark Roddy
• PLX PCI9656 driver developing problem
  • From: pci boy
• Re: Regarding KeInitializeSpinLock
  • From: wilhelm . lundgren
• Regarding KeInitializeSpinLock
  • From: wilhelm . lundgren
• Re: 2c_PmStandby fails on XP 64-bit
  • From: Stephan Wolf [MVP]
• Re: Miniport Driver doesnt show up
  • From: Stephan Wolf [MVP]
• Re: Miniport Driver doesnt show up
  • From: Stephan Wolf [MVP]
• Re: 2c_PmStandby fails on XP 64-bit
  • From: Calvin Guan
• Re: What should I do in AVStrMiniPinProcess() function without using DMA?
  • From: Lichfeng
• Re: wdf 5483 question
  • From: hanzhu
• Re: debug installation problem for KMDF driver
  • From: hanzhu
• Re: wdf 5483 question
  • From: hanzhu
• Miniport Driver doesnt show up
  • From: amit . chandak
• Re: File System Query
  • From: Maxim S. Shatskih
• Re: Mirror driver questions
  • From: Otto
• Re: File System Query
  • From: Kevin
• Re: ZwLockVirtualMemory Load-time error.
  • From: Carl Woodward
• Re: I/O driver
  • From: Don Burn
• Re: I/O driver
  • From: Albert Gomez
• Re: How to inhibit Enabling of I/O Resource
  • From: Eliyas Yakub [MSFT]
• Re: Determine OS support from INF
  • From: Eliyas Yakub [MSFT]
• Re: debug installation problem for KMDF driver
  • From: Eliyas Yakub [MSFT]
• Re: wdf 5483 question
  • From: Eliyas Yakub [MSFT]
• DPInst command line switches and IExpress wizard
  • From: shaji
• Re: a query.
  • From: Gary G. Little
• Re: I/O driver
  • From: Don Burn
• Re: I/O driver
  • From: Albert Gomez
• XP Dual Core USB MIDI driver problem
  • From: Mike Feena
• Re: File System Query
  • From: Mark Roddy
• Re: Determine OS support from INF
  • From: Jerry West
• Re: USB filter driver questions
  • From: Don Metzler
• Re: NDIS IM filter driver binding
  • From: Stephan Wolf [MVP]
• Re: Determine OS support from INF
  • From: Stephan Wolf [MVP]
• Re: usb device failed to start after the system resumed from hibernation
  • From: WilliamX
• bitmap printer driver.
  • From: jrc . src
• Re: usb device failed to start after the system resumed from hibernation
  • From: WilliamX
• Re: Physical memory topology when locking virtual memory
  • From: Francois Champs
• Re: usb device failed to start after the system resumed from hibernation
  • From: fat_boy
• Re: NDIS IM filter driver binding
  • From: mirage2k2
• Re: NDIS IM filter driver binding
  • From: Gaurav
• ZwLockVirtualMemory Load-time error.
  • From: on3lonestar
• Re: Intermediate Passthru driver with NDIS 5.1
  • From: Calvin Guan
• Re: Physical memory topology when locking virtual memory
  • From: Tim Roberts
• KMDF driver VS virtual port driver
  • From: hanzhu
• Re: debug installation problem for KMDF driver
  • From: hanzhu
• What should I do in AVStrMiniPinProcess() function without using DMA?
  • From: Lichfeng
• Re: Intermediate Passthru driver with NDIS 5.1
  • From: Maxim S. Shatskih
• Re: Intermediate Passthru driver with NDIS 5.1
  • From: postman
• Re: Intermediate Passthru driver with NDIS 5.1
  • From: postman
• Re: Intermediate Passthru driver with NDIS 5.1
  • From: Maxim S. Shatskih
• Re: Creating a KMDF NDIS <==> USB driver
  • From: Doron Holan [MS]
• Re: debug installation problem for KMDF driver
  • From: Doron Holan [MS]
• Re: Intermediate Passthru driver with NDIS 5.1
  • From: Calvin Guan
• Re: Intermediate Passthru driver with NDIS 5.1
  • From: postman
• Re: Virtual serial port
  • From: Juan Leni (matyca)
• Re: Creating a KMDF NDIS <==> USB driver
  • From: MARK D''SOUZA
• Re: Intermediate Passthru driver with NDIS 5.1
  • From: Maxim S. Shatskih
• Re: Intermediate Passthru driver with NDIS 5.1
  • From: Maxim S. Shatskih
• Re: Intermediate Passthru driver with NDIS 5.1
  • From: postman
• Re: how to write Wifi IM driver???
  • From: Calvin Guan
• debug installation problem for KMDF driver
  • From: hanzhu
• Re: Intermediate Passthru driver with NDIS 5.1
  • From: Calvin Guan
• Intermediate Passthru driver with NDIS 5.1
  • From: man . postman
• Re: UMDF and WinXP ?
  • From: Doron Holan [MS]
• Re: Generic PCI target driver
  • From: Calvin Guan
• Re: packet does not get to tcp ip
  • From: Calvin Guan
• Re: Generic PCI target driver
  • From: Mark Roddy
• Determine OS support from INF
  • From: Jerry West
• Re: I/O driver
  • From: Don Burn
• Generic PCI target driver
  • From: bm
• Re: I/O driver
  • From: Ali
• Re: I/O driver
  • From: Don Burn
• Re: I/O driver
  • From: Ali
• Re: Driver problem on NDIS5.1 but not on NDIS5.0?
  • From: Eliyas Yakub [MSFT]
• Re: I/O driver
  • From: Don Burn
• Re: UMDF and WinXP ?
  • From: Ali
• Re: I/O driver
  • From: Doron Holan [MS]
• Re: USB filter driver questions
  • From: Doron Holan [MS]
• Re: UMDF and WinXP ?
  • From: Doron Holan [MS]
• Re: which kind of driver to design for AoE protocol?
  • From: KOOLER
• Re: which kind of driver to design for AoE protocol?
  • From: KOOLER
• usb device failed to start after the system resumed from hibernation
  • From: WilliamX
• Trouble Installing Driver Using DIFxApp
  • From: minorguy
• I/O driver
  • From: Albert Gomez
• USB filter driver questions
  • From: Don Metzler
• Re: UMDF and WinXP ?
  • From: Skywing [MVP]
• Re: Physical memory topology when locking virtual memory
  • From: Maxim S. Shatskih
• Re: UMDF and WinXP ?
  • From: Ali
• NDIS IM filter driver binding
  • From: Gaurav
• Re: Physical memory topology when locking virtual memory
  • From: Maxim S. Shatskih
• Re: Mark IRP pending in KMDF driver
  • From: Maxim S. Shatskih
• Re: DMA adapters vs Map registers and Contiguous memory
  • From: Maxim S. Shatskih
• Re: safe way to upgrade KMDF from V1.0 to V1.1
  • From: Gennady Mayko
• Nonstandard symbolic link to a disk volume
  • From: Vladimir Zinin
• Re: safe way to upgrade KMDF from V1.0 to V1.1
  • From: hanzhu
• wdf 5483 question
  • From: hanzhu
• Re: Device Driver Modeling
  • From: Calvin Guan
• Passthru loading problem in CE 5.0
  • From: raj . rr7
• Re: Interaction between Kernel Mode driver and user mode application
  • From: Calvin Guan
• Re: Device Driver Modeling
  • From: Doron Holan [MS]
• Re: Interaction between Kernel Mode driver and user mode application
  • From: Doron Holan [MS]
• Re: Mark IRP pending in KMDF driver
  • From: Doron Holan [MS]
• Re: safe way to upgrade KMDF from V1.0 to V1.1
  • From: Doron Holan [MS]
• Re: Interaction between Kernel Mode driver and user mode application
  • From: ajay . sonawane
• Mark IRP pending in KMDF driver
  • From: Wei Wang
• safe way to upgrade KMDF from V1.0 to V1.1
  • From: hanzhu
• Re: UMDF and WinXP ?
  • From: Doron Holan [MS]
• Re: Installing 32-bit printer drivers as 'additional drivers' on x64 2
  • From: Alexander Grigoriev
• Re: Power callbacks
  • From: Andrew Sha
• Re: Reading until no more data is available.
  • From: Matt Ervin
• Re: Virtual serial port
  • From: Doron Holan [MS]
• Re: Reading until no more data is available.
  • From: Microsoft
• Re: Power callbacks
  • From: Doron Holan [MS]
• Virtual serial port
  • From: Juan Leni (matyca)
• RE: video streaming for Win 2K
  • From: "Martin Borve [MSFT]"
• Re: Input device filter driver to pass Vista logo
  • From: Ray Trent
• Re: Installing 32-bit printer drivers as 'additional drivers' on x64 2
  • From: Maxim S. Shatskih
• Re: Interaction between Kernel Mode driver and user mode application
  • From: Maxim S. Shatskih
• Re: DMA adapters vs Map registers and Contiguous memory
  • From: Maxim S. Shatskih
• Re: UMDF and WinXP ?
  • From: Don Burn
• Re: UMDF and WinXP ?
  • From: Ali
• Re: UMDF and WinXP ?
  • From: Ali
• Re: UMDF and WinXP ?
  • From: Don Burn
• RE: Installing 32-bit printer drivers as 'additional drivers' on x64 2
  • From: Scott Robins
• Re: UMDF and WinXP ?
  • From: Ali
• Re: how to write Wifi IM driver???
  • From: Thomas F. Divine [DDK MVP]
• Re: UMDF and WinXP ?
  • From: Don Burn
• Re: Power callbacks
  • From: Andrew Sha
• Re: UMDF and WinXP ?
  • From: Ali
• Re: UMDF and WinXP ?
  • From: Don Burn
• Win CE device driver opening - Good Salary
  • From: Alka
• Re: UMDF and WinXP ?
  • From: Ali
• Re: Debugging Dll with Softice Problem
  • From: Saurav
• Re: Interaction between Kernel Mode driver and user mode application
  • From: Don Burn
• Re: How to inhibit Enabling of I/O Resource
  • From: Don Burn
• Re: POSTSCRIPT_PASSTHROUGH
  • From: googlenusi
• Interaction between Kernel Mode driver and user mode application
  • From: ajay . sonawane
• Re: Debugging Dll with Softice Problem
  • From: Saurav
• Re: how to write Wifi IM driver???
  • From: Maxim S. Shatskih
• Re: How to get keyboard state
  • From: Maxim S. Shatskih
• Re: How do I create a custom packet?
  • From: Maxim S. Shatskih
• Re: How to inhibit Enabling of I/O Resource
  • From: Gernot Buselmeier
• Re: genprint Print Processor
  • From: jrc . src
• Re: genprint Print Processor
  • From: jrc . src
• Re: How to get keyboard state
  • From: Doron Holan [MS]
• How could I contact with Microsoft SmartCard service group?
  • From: haikun
• Re: Pipe name of an USB endpoint
  • From: Tim Roberts
• Re: Power callbacks
  • From: Doron Holan [MS]
• Re: How do I create a custom packet?
  • From: Calvin Guan
• Re: How do I create a custom packet?
  • From: Calvin Guan
• Re: How do I create a custom packet?
  • From: Maxim S. Shatskih
• Re: How do I create a custom packet?
  • From: Calvin Guan
• Re: How do I create a custom packet?
  • From: Calvin Guan
• Re: Can TerminateThread() kill a thread that has entered the kernel?
  • From: Maxim S. Shatskih
• Re: How do I create a custom packet?
  • From: Maxim S. Shatskih
• Re: How do I create a custom packet?
  • From: Thomas F. Divine [DDK MVP]
• Re: How do I create a custom packet?
  • From: rohanm79
• Re: Can TerminateThread() kill a thread that has entered the kernel?
  • From: DavidP
• Re: How do I create a custom packet?
  • From: Maxim S. Shatskih
• Re: usb flash disk communication
  • From: Marc Reinig
• Re: SCSIPORT question
  • From: Don Burn
• How do I create a custom packet?
  • From: rohanm79
• Re: usb flash disk communication
  • From: Maxim S. Shatskih
• Re: Reading until no more data is available.
  • From: Maxim S. Shatskih
• Re: packet does not get to tcp ip
  • From: Maxim S. Shatskih
• Re: SCSIPORT question
  • From: sven . kreamer
• Re: SCSIPORT question
  • From: Don Burn
• Re: SCSIPORT question
  • From: sven . kreamer
• Re: OID_TCP_TASK_OFFLOAD problem
  • From: Stephan Wolf [MVP]
• Driver problem on NDIS5.1 but not on NDIS5.0?
  • From: hugovanzyl
• Re: Debugging Dll with Softice Problem
  • From: Hartig
• Re: Power callbacks
  • From: Andrew Sha
• Re: genprint Print Processor
  • From: Igoogle
• Debugging Dll with Softice Problem
  • From: Saurav
• Re: POSTSCRIPT_PASSTHROUGH
  • From: googlenusi
• Re: genprint Print Processor
  • From: jrc . src
• pscript5 dynamic paper sizes
  • From: googlenusi
• Re: Help Needed : DriverApplication Wizard
  • From: Mark Roddy
• Re: Reading until no more data is available.
  • From: Mark Roddy
• Re: Help Needed : DriverApplication Wizard
  • From: fat_boy
• Re: genprint Print Processor
  • From: Christoph Lindemann
• Re: Reading until no more data is available.
  • From: soviet_bloke
• usb flash disk communication
  • From: mehmet bilgin
• genprint Print Processor
  • From: jrc . src
• Re: Reading until no more data is available.
  • From: Matt Ervin
• Re: Reading until no more data is available.
  • From: Matt Ervin
• Re: Reading until no more data is available.
  • From: soviet_bloke
• Re: Reading until no more data is available.
  • From: Mark Roddy
• Re: Power callbacks
  • From: Doron Holan [MS]
• Re: Pipe name of an USB endpoint
  • From: Doron Holan [MS]
• Re: Reading until no more data is available.
  • From: soviet_bloke
• Re: Reading until no more data is available.
  • From: soviet_bloke
• Re: Reading until no more data is available.
  • From: Matt Ervin
• Re: Reading until no more data is available.
  • From: soviet_bloke
• Re: packet does not get to tcp ip
  • From: Calvin Guan
• Re: which kind of driver to design for AoE protocol?
  • From: soviet_bloke
• Re: making source portable across different versions of WinNT
  • From: Mark Roddy
• Re: Executing PCI Option BIOS routines from a driver
  • From: Mark Roddy
• Re: USB multiple interfaces INF file
  • From: chris . aseltine
• Re: Reading until no more data is available.
  • From: Matt Ervin
• Reading until no more data is available.
  • From: Matt Ervin
• Re: Power callbacks
  • From: Andrew Sha
• Re: Pipe name of an USB endpoint
  • From: Junho Ryu
• Re: NDIS miniport IRP Interface
  • From: fat_boy
• Re: USB multiple interfaces INF file
  • From: Doron Holan [MS]
• Re: [USB] Isochronous transfer break
  • From: Doron Holan [MS]
• Re: How does GetFileSize() interact with a driver?
  • From: Doron Holan [MS]
• Re: making source portable across different versions of WinNT
  • From: Don Burn
• Re: SCSIPORT question
  • From: hanzhu
• Re: which kind of driver to design for AoE protocol?
  • From: Maxim S. Shatskih
• Re: a random happend BSOD: 0x0000007e(0xc0000005...) in ks.sys
  • From: Maxim S. Shatskih
• Re: SCSIPORT question
  • From: Mark Roddy
• Re: which kind of driver to design for AoE protocol?
  • From: soviet_bloke
• Re: a random happend BSOD: 0x0000007e(0xc0000005...) in ks.sys
  • From: andy
• SCSIPORT question
  • From: hanzhu
• Re: packet does not get to tcp ip
  • From: Maxim S. Shatskih
• Re: How does GetFileSize() interact with a driver?
  • From: Maxim S. Shatskih
• Re: packet does not get to tcp ip
  • From: vs
• Re: Pipe name of an USB endpoint
  • From: Tim Roberts
• Re: packet does not get to tcp ip
  • From: miki
• Re: How does GetFileSize() interact with a driver?
  • From: David J. Craig
• Re: How does GetFileSize() interact with a driver?
  • From: Matt Ervin
• Re: How does GetFileSize() interact with a driver?
  • From: Microsoft
• Re: How does GetFileSize() interact with a driver?
  • From: David J. Craig
• Re: intrinsic function for 64 bit
  • From: David J. Craig
• Re: WdfCoinstaller01001.dll and KMDF1.1
  • From: Doron Holan [MS]
• Re: How does GetFileSize() interact with a driver?
  • From: Microsoft
• Re: How does GetFileSize() interact with a driver?
  • From: Microsoft
• Re: Can TerminateThread() kill a thread that has entered the kernel?
  • From: Doron Holan [MS]
• Re: Power callbacks
  • From: Doron Holan [MS]
• Re: making source portable across different versions of WinNT
  • From: Doron Holan [MS]
• Re: Installing NDIS intermediate mode driver using Bindview applicatio
  • From: kapil.surlaker@xxxxxxxxx
• Re: making source portable across different versions of WinNT
  • From: Mark Roddy
• Re: Installing NDIS intermediate mode driver using Bindview applicatio
  • From: kapil.surlaker@xxxxxxxxx
• Re: Mirror driver questions
  • From: Ivan Brugiolo [MSFT]
• Installing NDIS intermediate mode driver using Bindview application code
  • From: kapil.surlaker@xxxxxxxxx
• Re: packet does not get to tcp ip
  • From: Maxim S. Shatskih
• Re: packet does not get to tcp ip
  • From: miki
• Re: packet does not get to tcp ip
  • From: miki
• Re: Can TerminateThread() kill a thread that has entered the kernel?
  • From: Maxim S. Shatskih
• Re: Can TerminateThread() kill a thread that has entered the kernel?
  • From: DavidP
• Re: Can TerminateThread() kill a thread that has entered the kernel?
  • From: DavidP
• RE: Missing DDK Sample Source Code pixel.cpp
  • From: Kevin Hough [MSFT]
• Re: Can TerminateThread() kill a thread that has entered the kernel?
  • From: Short But Sweet
• packet does not get to tcp ip
  • From: miki
• Power callbacks
  • From: Andrew Sha
• Re: Need Clarification
  • From: Maxim S. Shatskih
• Re: which kind of driver to design for AoE protocol?
  • From: Maxim S. Shatskih
• Re: Need Clarification
  • From: Doron Holan [MS]
• Re: which kind of driver to design for AoE protocol?
  • From: Ebola_Influenza
• Re: OID_TCP_TASK_OFFLOAD problem
  • From: Rodel Miguel
• Re: Booklet mode in the Print Processor ? ?
  • From: Naveen
• Re: Need Clarification
  • From: PSJK
• Re: Allocating memory in a filter hook driver callback function
  • From: soviet_bloke
• Re: DPInst.exe Security Prompts Twice for Unsigned Driver
  • From: Software Engineer
• Re: KeSetEvent crashing
  • From: Francois Champs
• Allocating memory in a filter hook driver callback function
  • From: x856256
• Re: which kind of driver to design for AoE protocol?
  • From: soviet_bloke
• driver update delima
  • From: sleeplesnmich
• Re: [USB] Isochronous transfer break
  • From: Doron Holan [MS]
• Re: which kind of driver to design for AoE protocol?
  • From: Ebola_Influenza
• Re: which kind of driver to design for AoE protocol?
  • From: Ebola_Influenza
• Re: Testcap & MPEG2-TS
  • From: Max Paklin
• Re: Testcap & MPEG2-TS
  • From: dos
• Re: which kind of driver to design for AoE protocol?
  • From: Don Burn
• Re: which kind of driver to design for AoE protocol?
  • From: soviet_bloke
• Re: Testcap & MPEG2-TS
  • From: Max Paklin
• Re: Compiler bug in the DDK--be aware of it
  • From: Pavel A.
• Re: How to disable the promiscuous mode of network adaptor
  • From: Pavel A.
• Re: manufacturing an IRP:
  • From: Don Burn
• Re: which kind of driver to design for AoE protocol?
  • From: Thomas F. Divine [DDK MVP]
• Re: KSPROPERTY_TYPE_SET cannot return data??
  • From: Max Paklin
• Re: which kind of driver to design for AoE protocol?
  • From: Don Burn
• Re: Are there any wireless drivers for vista yet ?
  • From: Maxim S. Shatskih
• Re: How does GetFileSize() interact with a driver?
  • From: Maxim S. Shatskih
• Re: PNP question regarding USB devices
  • From: Maxim S. Shatskih
• Re: Need Clarification
  • From: Maxim S. Shatskih
• Re: Breakpoints in Kernel-mode code
  • From: Maxim S. Shatskih
• Re: Breakpoints in Kernel-mode code
  • From: Maxim S. Shatskih
• Re: Can TerminateThread() kill a thread that has entered the kernel?
  • From: Maxim S. Shatskih
• Re: Can TerminateThread() kill a thread that has entered the kernel?
  • From: Maxim S. Shatskih
• Re: Q) SHA(Secure Hash Algorithm) for wireless NDIS driver.
  • From: Maxim S. Shatskih
• Re: which kind of driver to design for AoE protocol?
  • From: Maxim S. Shatskih
• Re: which kind of driver to design for AoE protocol?
  • From: Maxim S. Shatskih
• Re: which kind of driver to design for AoE protocol?
  • From: Maxim S. Shatskih
• Troubles with intercepting "application name" parameter of CreateProcessWithLogonW function.
  • From: Ilya Rabinovich
• Re: which kind of driver to design for AoE protocol?
  • From: soviet_bloke
• Re: which kind of driver to design for AoE protocol?
  • From: soviet_bloke
• Re: Can TerminateThread() kill a thread that has entered the kernel?
  • From: Doron Holan [MS]
• Re: How to create catalog file for driver with DIFx
  • From: chris . aseltine
• Re: Are there any wireless drivers for vista yet ?
  • From: Thomas F. Divine [DDK MVP]
• Re: which kind of driver to design for AoE protocol?
  • From: Thomas F. Divine [DDK MVP]
• Re: Can TerminateThread() kill a thread that has entered the kernel?
  • From: Skywing [MVP]
• Re: which kind of driver to design for AoE protocol?
  • From: Don Burn
• Re: which kind of driver to design for AoE protocol?
  • From: soviet_bloke
• Re: a random happend BSOD: 0x0000007e(0xc0000005...) in ks.sys
  • From: Mark Roddy
• Re: which kind of driver to design for AoE protocol?
  • From: Don Burn
• Re: which kind of driver to design for AoE protocol?
  • From: soviet_bloke
• Re: which kind of driver to design for AoE protocol?
  • From: soviet_bloke
• Re: which kind of driver to design for AoE protocol?
  • From: sven . kreamer
• Re: IoConnectInterrupt success, but ISR not called
  • From: Maxim S. Shatskih
• Re: IoConnectInterrupt success, but ISR not called
  • From: Maxim S. Shatskih
• Re: IoConnectInterrupt success, but ISR not called
  • From: Maxim S. Shatskih
• Re: KeSetEvent crashing
  • From: Maxim S. Shatskih
• Re: which kind of driver to design for AoE protocol?
  • From: KOOLER
• Re: which kind of driver to design for AoE protocol?
  • From: KOOLER
• Re: User mode vs. Kernel mode driver
  • From: Maxim S. Shatskih
• Re: which kind of driver to design for AoE protocol?
  • From: Maxim S. Shatskih
• Re: Can TerminateThread() kill a thread that has entered the kernel?
  • From: DavidP
• Re: How does GetFileSize() interact with a driver?
  • From: Doron Holan [MS]
• Re: Can TerminateThread() kill a thread that has entered the kernel?
  • From: Doron Holan [MS]
• Re: which kind of driver to design for AoE protocol?
  • From: sven . kreamer
• Re: Need Clarification
  • From: soviet_bloke
• Re: which kind of driver to design for AoE protocol?
  • From: soviet_bloke
• a random happend BSOD: 0x0000007e(0xc0000005...) in ks.sys
  • From: andy_liu
• Re: Mirror driver questions
  • From: Ivan Brugiolo [MSFT]
• Re: How does GetFileSize() interact with a driver?
  • From: Don Burn
• Re: Executing PCI Option BIOS routines from a driver
  • From: Matt Ervin
• How does GetFileSize() interact with a driver?
  • From: Matt Ervin
• Re: which kind of driver to design for AoE protocol?
  • From: Maxim S. Shatskih
• Re: Executing PCI Option BIOS routines from a driver
  • From: Maxim S. Shatskih
• Re: Accessing one device driver's resources from another
  • From: Maxim S. Shatskih
• Re: which kind of driver to design for AoE protocol?
  • From: KOOLER
• Re: PNP question regarding USB devices
  • From: Mark Roddy
• Re: KeSetEvent crashing
  • From: soviet_bloke
• Re: IoConnectInterrupt success, but ISR not called
  • From: Gary G. Little
• Re: Bug check and the cause ?
  • From: Gary G. Little
• Re: Can TerminateThread() kill a thread that has entered the kernel?
  • From: DavidP
• Re: which kind of driver to design for AoE protocol?
  • From: Don Burn
• Re: IoConnectInterrupt success, but ISR not called
  • From: Calvin Guan
• Re: which kind of driver to design for AoE protocol?
  • From: sven . kreamer
• Re: DPInst.exe Security Prompts Twice for Unsigned Driver
  • From: Ray Trent
• Re: OID_TCP_TASK_OFFLOAD problem
  • From: Stephan Wolf [MVP]
• DPInst.exe Security Prompts Twice for Unsigned Driver
  • From: Software Engineer
• Re: Booklet mode in the Print Processor ? ?
  • From: Steve Friedl [MVP]
• Re: Need Clarification
  • From: Don Burn
• Re: Breakpoints in Kernel-mode code
  • From: x856256
• Re: IoConnectInterrupt success, but ISR not called
  • From: caflores22@xxxxxxxxx
• Re: Query
  • From: Don Burn
• Re: which kind of driver to design for AoE protocol?
  • From: Don Burn
• Re: Query
  • From: h.wulff
• Re: Breakpoints in Kernel-mode code
  • From: Jeff Henkels
• Re: Printer install problems with 32-bit OS on 64-bit hardware
  • From: Jeff Henkels
• Re: Need Clarification
  • From: soviet_bloke
• Bug check and the cause ?
  • From: Thomas Johansen
• Re: IoConnectInterrupt success, but ISR not called
  • From: Calvin Guan
• RE: Why SdBusSubmitRequest() is hanging ?
  • From: Patrick
• Re: Breakpoints in Kernel-mode code
  • From: x856256
• Re: which kind of driver to design for AoE protocol?
  • From: sven . kreamer
• Re: Breakpoints in Kernel-mode code
  • From: Doron Holan [MS]
• Breakpoints in Kernel-mode code
  • From: x856256
• Re: Can TerminateThread() kill a thread that has entered the kernel?
  • From: Doron Holan [MS]
• Re: IoConnectInterrupt success, but ISR not called
  • From: Doron Holan [MS]
• Re: KeSetEvent crashing abnormally
  • From: Doron Holan [MS]
• Re: Printer install problems with 32-bit OS on 64-bit hardware
  • From: Michael Harvey
• Re: How to create catalog file for driver with DIFx
  • From: Duy Trinh
• Re: How to create catalog file for driver with DIFx
  • From: Duy Trinh
• Re: Can TerminateThread() kill a thread that has entered the kernel?
  • From: Skywing [MVP]
• Can TerminateThread() kill a thread that has entered the kernel?
  • From: DavidP
• Q) SHA(Secure Hash Algorithm) for wireless NDIS driver.
  • From: Daum
• RE: IoConnectInterrupt success, but ISR not called
  • From: Pavel A.
• Re: Dumb Question - Installing Device Drivers using an MSI and Active Directory
  • From: Alan Morris
• IoConnectInterrupt success, but ISR not called
  • From: caflores22
• Re: User mode vs. Kernel mode driver
  • From: G. Yammine
• Re: Dumb Question - Installing Device Drivers using an MSI and Active Directory
  • From: Gary G. Little
• Re: Executing PCI Option BIOS routines from a driver
  • From: Matt Ervin
• Re: User mode vs. Kernel mode driver
  • From: Don Burn
• Dumb Question - Installing Device Drivers using an MSI and Active Directory
  • From: Alan Morris
• Re: KeSetEvent crashing abnormally
  • From: Skywing [MVP]
• Re: How to create catalog file for driver with DIFx
  • From: Marco Peretti
• Re: How to disable the promiscuous mode of network adaptor
  • From: fongfong
• Re: which kind of driver to design for AoE protocol?
  • From: Don Burn
• Re: which kind of driver to design for AoE protocol?
  • From: sven . kreamer
• Re: User mode vs. Kernel mode driver
  • From: Don Burn
• Re: Port Blocking Driver:Dynamic Unloading
  • From: Doron Holan [MS]
• Re: How to create catalog file for driver with DIFx
  • From: chris . aseltine
• Port Blocking Driver:Dynamic Unloading
  • From: Debabrata
• Re: which kind of driver to design for AoE protocol?
  • From: Don Burn
• How to create catalog file for driver with DIFx
  • From: Duy Trinh
• Re: installing a filter minidriver
  • From: Marco Peretti
• Re: Testcap & MPEG2-TS
  • From: dos
• Re: which kind of driver to design for AoE protocol?
  • From: soviet_bloke
• Re: Accessing one device driver's resources from another
  • From: vs
• Re: Executing PCI Option BIOS routines from a driver
  • From: Doron Holan [MS]
• Re: Virtual Disk in User space
  • From: Doron Holan [MS]
• Re: sample ndiswdm promiscuous mode doenst work from win2003ddk sp1
  • From: tcpoob
• Re: Adding a property sheet to another printer driver.
  • From: Steve Friedl [MVP]
• display driver 720x480 resolution and overlays
  • From: mudeem
• Pipe name of an USB endpoint
  • From: Junho Ryu
• OID_TCP_TASK_OFFLOAD problem
  • From: Rodel Miguel
• Re: Executing PCI Option BIOS routines from a driver
  • From: Matt Ervin
• Re: Testcap & MPEG2-TS
  • From: Max Paklin
• Re: Ndis ProtocolUnbindAdapter question. Am i doing this right?
  • From: Stephan Wolf [MVP]
• Re: Executing PCI Option BIOS routines from a driver
  • From: Stephan Wolf [MVP]
• Re: KSPROPERTY_TYPE_SET cannot return data??
  • From: Max Paklin
• Re: sample ndiswdm promiscuous mode doenst work from win2003ddk sp1
  • From: Stephan Wolf [MVP]
• Re: sample ndiswdm promiscuous mode doenst work from win2003ddk sp1
  • From: Stephan Wolf [MVP]
• Re: Executing PCI Option BIOS routines from a driver
  • From: Matt Ervin
• Re: Executing PCI Option BIOS routines from a driver
  • From: Maxim S. Shatskih
• Re: Ndis ProtocolUnbindAdapter question. Am i doing this right?
  • From: Maxim S. Shatskih
• Re: WDM or WDK
  • From: Control Freq
• Re: WDM or WDK
  • From: Maxim S. Shatskih
• Re: WDM or WDK
  • From: Maxim S. Shatskih
• sample ndiswdm promiscuous mode doenst work from win2003ddk sp1
  • From: tcpoob
• Re: Accessing one device driver's resources from another
  • From: Maxim S. Shatskih
• Re: Kernel-mode simulator
  • From: Maxim S. Shatskih
• Executing PCI Option BIOS routines from a driver
  • From: Matt Ervin
• Adding a property sheet to another printer driver.
  • From: Radu Cosoveanu
• Re: Kernel-mode simulator
  • From: Skywing [MVP]
• Re: KMDF's osrusbfx2 example - Help
  • From: Bruno van Dooren [MVP VC++]
• Re: Virtual Disk in User space
  • From: Sh@h
• Re: Virtual Disk in User space
  • From: Sh@h
• Re: WDM or WDK
  • From: Don Burn
• Re: WDM or WDK
  • From: Don Burn
• Re: WDM or WDK
  • From: Bruno van Dooren [MVP VC++]
• Re: Code 31 "Windows cannot load driver" when installing Wifi PCI card in WIn 2000 pack 4
  • From: Bruno van Dooren [MVP VC++]
• Re: WDM or WDK
  • From: Control Freq
• Re: WDM or WDK
  • From: Don Burn
• Re: Kernel-mode simulator
  • From: hanzhu
• Re: Testcap & MPEG2-TS
  • From: dos
• Re: WDM or WDK
  • From: Control Freq
• Re: Code 31 "Windows cannot load driver" when installing Wifi PCI card in WIn 2000 pack 4
  • From: fat_boy
• Re: WDM or WDK
  • From: fat_boy
• Re: Kernel-mode simulator
  • From: soviet_bloke
• Re: Testcap & MPEG2-TS
  • From: Max Paklin
• Re: Testcap & MPEG2-TS
  • From: dos
• Re: NDIS Intermediate Driver Passthru
  • From: Alireza Dabagh [MS]
• Re: Code 31 "Windows cannot load driver" when installing Wifi PCI card in WIn 2000 pack 4
  • From: cazic99
• Code 31 "Windows cannot load driver" when installing Wifi PCI card in WIn 2000 pack 4
  • From: drjamesh
• Re: Loading winusb.sys in Window XP
  • From: Doron Holan [MS]
• Re: Automatic loading of WDF driver
  • From: Doron Holan [MS]
• Re: USB HID LED usage page use in Windows
  • From: Doron Holan [MS]
• Re: Virtual Disk in User space
  • From: Doron Holan [MS]
• Re: Virtual Disk in User space
  • From: Doron Holan [MS]
• Printer install problems with 32-bit OS on 64-bit hardware
  • From: Michael Harvey
• Re: Loading winusb.sys in Window XP
  • From: vcsrave
• Re: WDM or WDK
  • From: Don Burn
• Re: WDM or WDK
  • From: r_konjeti
• Re: WDM or WDK
  • From: Don Burn
• Re: WDM or WDK
  • From: Calvin Guan
• WDM or WDK
  • From: Control Freq
• Re: WDDM Support
  • From: Calvin Guan
• Re: Automatic loading of WDF driver
  • From: Don Burn
• Re: Automatic loading of WDF driver
  • From: ramjohnny
• Re: Accessing one device driver's resources from another
  • From: Doron Holan [MS]
• Re: Virtual Disk in User space
  • From: Doron Holan [MS]
• Re: Accessing one device driver's resources from another
  • From: Don Burn
• Re: Kernel-mode simulator
  • From: Don Burn
• Re: Explorer reading contents of a file on a single click
  • From: h.wulff
• Re: Virtual Disk in User space
  • From: Stephan Wolf [MVP]
• Re: NDIS IM - DRIVER_IRQL_NOT_LESS_OR_EQUAL after a while..
  • From: Stephan Wolf [MVP]
• Re: Ndis IM driver not usable on WXP bridge
  • From: Stephan Wolf [MVP]
• Re: Kernel-mode simulator
  • From: x856256
• Re: Testcap & MPEG2-TS
  • From: Max Paklin
• Print Preview for an XPSDrv Driver
  • From: inoue.mao@xxxxxxxxx
• Re: USB halt
  • From: heinz
• RE: video streaming for Win 2K
  • From: Dan Maddy [MSFT]
• Re: Windows 2000 Display driver model driver on Vista
  • From: sastry . murali
• RE: NdisIMInitializeDeviceInstanceEx On Passthru IM
  • From: "Bryan S. Burgin [MSFT]"
• RE: [Q]FilterClass and Layering
  • From: "Bryan S. Burgin [MSFT]"
• RE: usb ndis driver query
  • From: "Bryan S. Burgin [MSFT]"
• Re: KMDF's osrusbfx2 example - Help
  • From: Doron Holan [MS]
• RE: CCX SSIDL IE
  • From: "Bryan S. Burgin [MSFT]"
• RE: Missing DDK Sample Source Code pixel.cpp
  • From: Kevin Hough [MSFT]
• RE: IRP_MJ_SETINFORMATION question
  • From: usfinecats
• Re: Automatic loading of WDF driver
  • From: Don Burn
• Re: Automatic loading of WDF driver
  • From: ramjohnny
• Windows 2000 Display driver model driver on Vista
  • From: sastry . murali
• Re: Automatic loading of WDF driver
  • From: Don Burn
• Re: NDIS IM - DRIVER_IRQL_NOT_LESS_OR_EQUAL after a while..
  • From: Alireza Dabagh [MS]
• no DIF_NEWDEVICEWIZARD_FINISHINSTALL dif code on vista
  • From: Mike Christensen
• Re: GetPrinterDriver in Windows XP Professional x64 Edition
  • From: Michael Harvey
• Re: Ndis IM driver not usable on WXP bridge
  • From: Thomas F. Divine [DDK MVP]
• Re: Kernel-mode simulator
  • From: Beverly Brown
• Re: Kernel-mode simulator
  • From: Maxim S. Shatskih
• Re: finding maximum stack usage
  • From: Maxim S. Shatskih
• Re: Kernel-mode simulator
  • From: Don Burn
• Re: USB halt
  • From: Kenneth
• Re: Kernel-mode simulator
  • From: hanzhu
• Re: Pcmcia card Hardware ID
  • From: asoubki
• Kernel-mode simulator
  • From: x856256
• Re: USB halt
  • From: heinz
• finding maximum stack usage
  • From: miki
• Re: Dynamic change of frame size / Resolution !!!!
  • From: darshan . tapdia
• USB halt
  • From: epedie
• Re: Virtual Disk in User space
  • From: sven . kreamer
• Re: IOCTL_SCSI_MINIPORT question
  • From: hanzhu
• Re: NdisMEthIndicateReceive - no reaction
  • From: arek . ploski
• Re: NDIS IM - DRIVER_IRQL_NOT_LESS_OR_EQUAL after a while..
  • From: arek . ploski
• Re: Assigning raw mode to PDO in KMDF problem.
  • From: Doron Holan [MS]
• Re: BSOD while doing IRP_MJ_DIRECTORY_CONTROL
  • From: Doron Holan [MS]
• Re: To disable one of the 1394 OHCI host Port
  • From: Maxim S. Shatskih
• Booklet mode in the Print Processor ? ?
  • From: Steve Friedl [MVP]
• IOCTL_SCSI_MINIPORT question
  • From: hanzhu
• Re: NdisMEthIndicateReceive - no reaction
  • From: arek . ploski
• Re: NDIS IM - DRIVER_IRQL_NOT_LESS_OR_EQUAL after a while..
  • From: arek . ploski
• Re: Virtual Disk in User space
  • From: sven . kreamer
• NDIS IM - DRIVER_IRQL_NOT_LESS_OR_EQUAL after a while..
  • From: arek . ploski
• Re: Pcmcia card Hardware ID
  • From: Pavel A.
• Re: Assigning raw mode to PDO in KMDF problem.
  • From: Lukasz Chróst
• BSOD while doing IRP_MJ_DIRECTORY_CONTROL
  • From: Toni
• Re: GetPrinterDriver in Windows XP Professional x64 Edition
  • From: Maxim S. Shatskih
• Re: Testcap & MPEG2-TS
  • From: dos
• Re: GetPrinterDriver in Windows XP Professional x64 Edition
  • From: Steve Friedl [MVP]
• Dynamic change of frame size / Resolution !!!!
  • From: darshan . tapdia
• Re: GetPrinterDriver in Windows XP Professional x64 Edition
  • From: Alan Adams
• Re: Assigning raw mode to PDO in KMDF problem.
  • From: Doron Holan [MS]
• Re: Punting to GDI Engine
  • From: Vipin
• Assigning raw mode to PDO in KMDF problem.
  • From: lukost
• Re: hw-id / compatible-id determination
  • From: Doron Holan [MS]
• Re: hw-id / compatible-id determination
  • From: Tim Roberts
• Re: GetPrinterDriver in Windows XP Professional x64 Edition
  • From: Michael Harvey
• Re: GetPrinterDriver in Windows XP Professional x64 Edition
  • From: Alan Adams
• Re: GetPrinterDriver in Windows XP Professional x64 Edition
  • From: Steve Friedl [MVP]
• Re: IRP queueing order for disk devices
  • From: Doron Holan [MS]
• Re: DeviceClassGuid in IoCreateDeviceSecure()- what happens if its NUL
  • From: Doron Holan [MS]
• Re: Loading winusb.sys in Window XP
  • From: Doron Holan [MS]
• Re: hw-id / compatible-id determination
  • From: Doron Holan [MS]
• GetPrinterDriver in Windows XP Professional x64 Edition
  • From: Michael Harvey
• Re: IRP queueing order for disk devices
  • From: Maxim S. Shatskih
• Re: Testcap & MPEG2-TS
  • From: Max Paklin
• Re: inf file for ISA serial card
  • From: Maxim S. Shatskih
• Re: how can i take parallel Pin Status?
  • From: Maxim S. Shatskih
• Re: Assembly Code in 64 bit driver
  • From: Code Jockey
• Re: hw-id / compatible-id determination
  • From: Pavel A.
• Re: Loading winusb.sys in Window XP
  • From: vcsrave
• Re: Knowing a specific registry key before plugging a USB device
  • From: Pavel A.
• Re: DifxAPI question
  • From: Eliyas Yakub [MSFT]
• Re: Pre-installing a modified driver INF file
  • From: Eliyas Yakub [MSFT]
• Re: hw-id / compatible-id determination
  • From: Eliyas Yakub [MSFT]
• Re: Pcmcia card Hardware ID
  • From: Pavel A.
• Re: how can i take parallel Pin Status?
  • From: sumareh
• Re: Pcmcia card Hardware ID
  • From: asoubki
• Re: inf file for ISA serial card
  • From: Don Burn
• inf file for ISA serial card
  • From: jurgenls
• Re: Knowing a specific registry key before plugging a USB device
  • From: Maxim S. Shatskih
• Testcap & MPEG2-TS
  • From: dos
• Re: Pcmcia card Hardware ID
  • From: asoubki
• Re: Pcmcia card Hardware ID
  • From: asoubki
• Re: dxgkdx.dll
  • From: Doron Holan [MS]
• Re: Loading winusb.sys in Window XP
  • From: Doron Holan [MS]
• Re: hw-id / compatible-id determination
  • From: Doron Holan [MS]
• Re: Eliyas Yakub [MSFT]
  • From: Michael
• Re: Eliyas Yakub [MSFT]
  • From: Eliyas Yakub [MSFT]
• Ping: Eliyas Yakub [MSFT]
  • From: Michael
• Re: Pcmcia card Hardware ID
  • From: Pavel A.
• Re: How do I get a devices "Device Instance ID" programmatically
  • From: Michael
• Re: TDI_EVENT_RECEIVE question
  • From: hanzhu
• Re: KSPROPERTY_TYPE_SET cannot return data??
  • From: Max Paklin
• Re: Assembly Code in 64 bit driver
  • From: Ray Trent
• Re: Pcmcia card Hardware ID
  • From: Maxim S. Shatskih
• Re: Assembly Code in 64 bit driver
  • From: Maxim S. Shatskih
• Pcmcia card Hardware ID
  • From: asoubki
• Re: Bugcheck 9C
  • From: Maxim S. Shatskih
• Re: TDI_EVENT_RECEIVE question
  • From: Maxim S. Shatskih
• Re: Pre-installing a modified driver INF file
  • From: Eliyas Yakub [MSFT]
• Re: Winsock Transport Service Provider
  • From: hootch
• Re: Pre-installing a modified driver INF file
  • From: Maxim S. Shatskih
• Re: how can i take parallel Pin Status?
  • From: Maxim S. Shatskih
• Re: Assembly Code in 64 bit driver
  • From: Maxim S. Shatskih
• Loading winusb.sys in Window XP
  • From: vcsrave
• Re: Unable to DEbug the Driver in the user mode
  • From: Sahaj
• Re: File system filter driver documentation
  • From: Ali
• Re: File system filter driver documentation
  • From: Ali
• Re: File system filter driver documentation
  • From: Don Burn
• File system filter driver documentation
  • From: manoj . jain . 80
• hw-id / compatible-id determination
  • From: nieters@xxxxxxxxxx
• Re: PCI Express Vs PCI cards in Windows
  • From: Doron Holan [MS]
• Re: should I remove ether
  • From: Thomas F. Divine [DDK MVP]
• Re: should I remove ether
  • From: Norman Diamond
• Bugcheck 9C
  • From: satv73
• should I remove ether
  • From: miki
• Re: KSPROPERTY_TYPE_SET cannot return data??
  • From: Max Paklin
• PCI Express Vs PCI cards in Windows
  • From: sriivii
• Re: Assembly Code in 64 bit driver
  • From: Tim Roberts
• Re: Source color profiles
  • From: Tim Roberts
• Re: Completion routine not called!
  • From: Doron Holan [MS]
• Re: Mount Manager, gives me too small buffers
  • From: Doron Holan [MS]
• Re: DMA question
  • From: Ashok Bruno
• Re: Assembly Code in 64 bit driver
  • From: Gary. G. Little
• TDI_EVENT_RECEIVE question
  • From: hanzhu
• Re: Windows Vista replaces which OS?
  • From: Norman Diamond
• Re: Windows Vista replaces which OS?
  • From: Don Burn
• Re: Windows Vista replaces which OS?
  • From: Don Burn
• Re: sharing a DLL between process
  • From: Skywing [MVP]
• how can i take parallel Pin Status?
  • From: sumareh
• Re: sharing a DLL between process
  • From: sumareh
• sharing a DLL between process
  • From: sumareh
• Re: Winsock Transport Service Provider
  • From: Doron Holan [MS]
• Re: Motherboard Sensors
  • From: Maxim S. Shatskih
• Re: CreateFile to open a COM in two different process
  • From: Maxim S. Shatskih
• Re: Compiler bug in the DDK--be aware of it
  • From: Pavel A.
• Re: Assembly Code in 64 bit driver
  • From: Don Burn
• Re: Windows 2000 and Win XP compatible driver
  • From: Maxim S. Shatskih
• Re: Assembly Code in 64 bit driver
  • From: Don Burn
• Re: NDIS Intermediate Driver Passthru
  • From: Thomas F. Divine [DDK MVP]
• Re: NDIS Intermediate Driver Passthru
  • From: Thomas F. Divine [DDK MVP]
• Re: pci bus discovery
  • From: Eliyas Yakub [MSFT]
• Re: pnpdtest.exe Double Start Test, is this a valid test?
  • From: Eliyas Yakub [MSFT]
• Re: DMA question
  • From: Eliyas Yakub [MSFT]
• NDIS Intermediate Driver Passthru
  • From: man . postman
• pnpdtest.exe Double Start Test, is this a valid test?
  • From: DavidP
• CreateFile to open a COM in two different process
  • From: sumareh
• CreateFile to open a COM in two different process
  • From: lgbrito
• Re: Winsock Transport Service Provider
  • From: hootch
• DMA question
  • From: Ashok Bruno
• Re: Windows 2000 and Win XP compatible driver
  • From: wilhelm . lundgren
• Isochronous pipe usage in USB drivers
  • From: Murali
• Re: Windows 2000 and Win XP compatible driver
  • From: Gary G. Little
• Re: Looking for a way to develop Virtual Printer Driver
  • From: Vipin
• Re: Unable to DEbug the Driver in the user mode
  • From: Vladimir Zinin
• Re: How to start use DDK...?
  • From: Don Burn
• Re: Windows 2000 and Win XP compatible driver
  • From: Vladimir Zinin
• Source color profiles
  • From: parsh . xx
• Re: Windows 2000 and Win XP compatible driver
  • From: wilhelm . lundgren
• Re: Windows 2000 and Win XP compatible driver
  • From: Vladimir Zinin
• Loading multiple original display drivers thru a filter display driver???
  • From: mangesh2K6
• Re: Extract Emf from Spoolfile
  • From: Christoph Lindemann
• Windows 2000 and Win XP compatible driver
  • From: wilhelm . lundgren
• Re: Plz help me to correct my code to send E-mail as NT service .
  • From: Tim Roberts
• Re: How to start use DDK...?
  • From: Jaffar
• Re: Plz help me to correct my code to send E-mail as NT service .
  • From: Maxim S. Shatskih
• Re: Filter Hook
  • From: Maxim S. Shatskih
• Re: Winsock Transport Service Provider
  • From: Doron Holan [MS]
• Re: Compiler bug in the DDK--be aware of it
  • From: Norman Diamond
• Re: How to disable the promiscuous mode of network adaptor
  • From: Thomas F. Divine [DDK MVP]
• Winsock Transport Service Provider
  • From: hootch
• Re: DMA transactions
  • From: Ashok Bruno
• Re: How to disable the promiscuous mode of network adaptor
  • From: Thomas F. Divine [DDK MVP]
• Re: FsRtlIsNameInExpression
  • From: h.wulff
• Re: non-hardware driver?
  • From: Eliyas Yakub [MSFT]
• Re: DMA transactions
  • From: Eliyas Yakub [MSFT]
• Re: 64 Bit CoInstaller
  • From: Stefan de Buhr
• Re: 64 Bit CoInstaller
  • From: Eliyas Yakub [MSFT]
• Re: 1394 OHCI Port Driver API
  • From: Doron Holan [MS]
• Re: 64 Bit CoInstaller
  • From: Doron Holan [MS]
• 1394 OHCI Port Driver API
  • From: Jeroen Koeter
• Re: Why no floppy tape drivers from Win2k on?
  • From: Mark Roddy
• 64 Bit CoInstaller
  • From: Stefan de Buhr
• AddPrinter
  • From: Andi3007
• Extract Emf from Spoolfile
  • From: as
• Re: Filter Hook
  • From: hanzhu
• Re: Filter Hook
  • From: x856256
• Re: Want WDK for Vista(Beta 2)!!!
  • From: darshan . tapdia
• Re: Looking for a way to develop Virtual Printer Driver
  • From: Radu Cosoveanu
• Device Name to Dos Name (IoQueryFileDosDeviceName)
  • From: Erik
• Re: Unable to DEbug the Driver in the user mode
  • From: Sahaj
• Why no floppy tape drivers from Win2k on?
  • From: Ian Boyd
• Re: Filter Hook
  • From: soviet_bloke
• Re: Filter Hook
  • From: x856256
• Plz help me to correct my code to send E-mail as NT service .
  • From: kanthasamy M
• Re: Filter Hook
  • From: hanzhu
• FsRtlIsNameInExpression
  • From: Carl Woodward
• Re: Filter Hook
  • From: Alexander Grigoriev
• Re: Filter Hook
  • From: x856256
• Re: Send data to Spooler
  • From: Vipin
• Re: Filter Hook
  • From: Doron Holan [MS]
• Re: DMA transactions
  • From: Doron Holan [MS]
• Re: Filter Hook
  • From: x856256
• Problem in SRB_SURPRISE_REMOVAL , Driver is Crashing!!!!!!!!!!
  • From: darshan . tapdia
• Re: Filter Hook
  • From: Don Burn
• Re: Filter Hook
  • From: x856256
• Re: NDIS driver install by snetcfg.exe help!
  • From: Stephan Wolf [MVP]
• Re: Compiling the BindView application in Windows DDK
  • From: Stephan Wolf [MVP]
• Re: Windows XP Driver Hang
  • From: Mark Roddy
• Re: Console Mode application in WinCE
  • From: Tim Roberts
• Re: Filter Hook
  • From: Don Burn
• Filter Hook
  • From: x856256
• Re: Unable to DEbug the Driver in the user mode
  • From: Maxim S. Shatskih
• Unable to DEbug the Driver in the user mode
  • From: Sahaj
• Re: How to inhibit Enabling of I/O Resource
  • From: Eliyas Yakub [MSFT]
• Re: DMA transactions
  • From: Eliyas Yakub [MSFT]
• Re: Mapping multiple physical/system address virtual buffers into a single user-space virtual range.
  • From: Maxim S. Shatskih
• Re: Multiple requests on KMDF
  • From: Eliyas Yakub [MSFT]
• Re: Mapping multiple physical/system address virtual buffers into a single user-space virtual range.
  • From: grishka
• Re: Compiling the BindView application in Windows DDK
  • From: Maxim S. Shatskih
• Re: IRP_MJ_SCSI
  • From: vs
• Re: One driver for two device?
  • From: Max Paklin
• Compiling the BindView application in Windows DDK
  • From: kapil.surlaker@xxxxxxxxx
• Re: non-hardware driver?
  • From: Maxim S. Shatskih
• Re: Mapping multiple physical/system address virtual buffers into a single user-space virtual range.
  • From: Maxim S. Shatskih
• Re: Mapping multiple physical/system address virtual buffers into a single user-space virtual range.
  • From: Pavel A.
• Re: non-hardware driver?
  • From: Doron Holan [MS]
• Re: Compiler bug in the DDK--be aware of it
  • From: Gary G. Little
• Re: UVC, Vista, Idle dection
  • From: shinji2
• Re: Compiler bug in the DDK--be aware of it
  • From: Pavel A.
• Re: UVC, Vista, Idle dection
  • From: Pavel A.
• Re: Irp->MdlAddress is NULL
  • From: Marvin
• Re: non-hardware driver?
  • From: Don Burn
• non-hardware driver?
  • From: nieters@xxxxxxxxxx
• Re: Debug Printing from SCSI miniport
  • From: vs
• Re: How to start use DDK...?
  • From: Don Burn
• Re: One driver for two device?
  • From: WilliamX
• Re: Looking for a way to develop Virtual Printer Driver
  • From: Hieu Le Trung
• Re: One driver for two device?
  • From: Max Paklin
• Re: PCI bus, device, and function numbers from SetupDi?
  • From: Vetzak
• Re: UMDF driver debugging
  • From: jacob.chang
• Re: How to Access hardware buffers thru DShow Interfaces / other A
  • From: Max Paklin
• Re: KSPROPERTY_TYPE_SET cannot return data??
  • From: Max Paklin
• Re: Cannot open $MFT::$BITMAP attribute
  • From: aisajanyen
• Can't get stream point when attached two devices into a usb hub
  • From: WilliamX
• Re: PCI bus, device, and function numbers from SetupDi?
  • From: Tim Roberts
• Re: How to Link USB audio device ID with Hardware MID&PID
  • From: Tim Roberts
• Re: UMDF driver debugging
  • From: Tim Roberts
• Re: Cannot open $MFT::$BITMAP attribute
  • From: Norman Diamond
• Console Mode application in WinCE
  • From: nagu
• Re: KMDF CreateFile handler and WdfDeviceInitSetFileObjectConfig
  • From: Doron Holan [MS]
• Re: Writing driver for blocking IO ports
  • From: Doron Holan [MS]
• Re: Compiler bug in the DDK--be aware of it
  • From: Doron Holan [MS]
• PCI bus, device, and function numbers from SetupDi?
  • From: skillzero@xxxxxxxxx
• Re: Debug Printing from SCSI miniport
  • From: Mark Roddy
• Re: Microsoft Tape Format
  • From: cristalink
• Re: virtual printer and file transfert
  • From: Sahaj
• Re: Knowing a specific registry key before plugging a USB device
  • From: Maxim S. Shatskih
• Re: Interfacing to Com port driver
  • From: Maxim S. Shatskih
• Re: Cannot open $MFT::$BITMAP attribute
  • From: Maxim S. Shatskih
• Re: How much knowledge of OS is required using WDF?
  • From: Junho Ryu
• Re: How to start use DDK...?
  • From: Gary G. Little
• Re: Cannot open $MFT::$BITMAP attribute
  • From: aisajanyen
• Re: Debug Printing from SCSI miniport
  • From: Gary G. Little
• Re: Windows XP Driver Hang
  • From: Shreyash B. Patel
• Re: Windows XP Driver Hang
  • From: Shreyash B. Patel
• RE: Windows XP Driver Hang
  • From: Shreyash B. Patel
• Re: How to start use DDK...?
  • From: Don Burn
• Re: NDIS Protocol Driver and model OSI
  • From: Arkady Frenkel
• Re: Writing driver for blocking IO ports
  • From: Don Burn
• Re: Writing driver for blocking IO ports
  • From: Don Burn
• Re: Looking for a way to develop Virtual Printer Driver
  • From: Jeff Henkels
• Re: Microsoft Tape Format
  • From: John Aquilina
• Re: Writing driver for blocking IO ports
  • From: Debabrata
• Re: NDIS Protocol Driver and model OSI
  • From: Maxim S. Shatskih
• Re: Knowing a specific registry key before plugging a USB device
  • From: Maxim S. Shatskih
• Re: Irp->MdlAddress is NULL
  • From: Maxim S. Shatskih
• NDIS Protocol Driver and model OSI
  • From: noe
• Re: Writing driver for blocking IO ports
  • From: soviet_bloke
• Re: Looking for a way to develop Virtual Printer Driver
  • From: Hieu Le Trung
• Re: Writing driver for blocking IO ports
  • From: Doron Holan [MS]
• Re: DeviceIOControl to mouse driver..
  • From: Doron Holan [MS]
• Re: UVC, Vista, Idle dection
  • From: shinji
• Re: IRQL He11
  • From: Slide-O-Mix
• Re: Writing driver for blocking IO ports
  • From: soviet_bloke
• Re: DeviceIOControl to mouse driver..
  • From: chueh8
• Re: IRQL He11
  • From: Don Burn
• IRQL He11
  • From: Slide-O-Mix
• Irp->MdlAddress is NULL
  • From: Marvin
• Re: Looking for a way to develop Virtual Printer Driver
  • From: Steve Friedl [MVP]
• Re: DeviceIOControl to mouse driver..
  • From: Marc Reinig
• RE: Windows XP Driver Hang
  • From: Shreyash B. Patel
• Re: How to inhibit Enabling of I/O Resource
  • From: Gernot Buselmeier
• Re: Writing driver for blocking IO ports
  • From: Don Burn
• Writing driver for blocking IO ports
  • From: Debabrata
• Re: Compiler bug in the DDK--be aware of it
  • From: Don Burn
• Re: DeviceIOControl to mouse driver..
  • From: Maxim S. Shatskih
• Re: UMDF driver debugging
  • From: Maxim S. Shatskih
• Re: Cannot open $MFT::$BITMAP attribute
  • From: Maxim S. Shatskih
• Re: Windows XP Driver Hang
  • From: Maxim S. Shatskih
• Debug Printing from SCSI miniport
  • From: vs
• One driver for two device?
  • From: fantast_xue
• DeviceIOControl to mouse driver..
  • From: chueh8
• UMDF driver debugging
  • From: jacob.chang
• UVC, Vista, Selective Suspend
  • From: shinji
• Cannot open $MFT::$BITMAP attribute
  • From: aisajanyen
• Re: _resetstkoflw() error
  • From: Tim Roberts
• Re: How to know the BandWidth of a USB 2.0 device?
  • From: Tim Roberts
• Looking for a way to develop Virtual Printer Driver
  • From: Hieu Le Trung
• Re: DMA transactions
  • From: Ashok Bruno
• Re: IRP_MJ_READ asynchronous completion
  • From: Ali
• Re: DMA transactions
  • From: Doron Holan [MS]
• Re: Multiple requests on KMDF
  • From: Doron Holan [MS]
• Re: IRP_MJ_READ asynchronous completion
  • From: Doron Holan [MS]
• Re: Windows XP Driver Hang
  • From: cristalink
• Re: Want WDK for Vista(Beta 2)!!!
  • From: peterwie
• Re: How much knowledge of OS is required using WDF?
  • From: peterwie
• Re: Debugging
  • From: peterwie
• Re: Suppress command window wile using IExpress wizard
  • From: shaji
• Re: Debugging
  • From: root60931@xxxxxxxxx
• Re: Debugging
  • From: Maxim S. Shatskih
• Re: How much knowledge of OS is required using WDF?
  • From: Maxim S. Shatskih
• hyperthreading prevents printer driver installation
  • From: Michael Harvey
• Re: NDIS driver install by snetcfg.exe help!
  • From: ttan
• Re: NDIS driver install by snetcfg.exe help!
  • From: Thomas F. Divine [DDK MVP]
• Debugging
  • From: Ashok Bruno
• Re: Compiler bug in the DDK--be aware of it
  • From: Don Burn
• Multiple requests on KMDF
  • From: Paul_Simon
• Re: Compiler bug in the DDK--be aware of it
  • From: Don Burn
• Re: Compiler bug in the DDK--be aware of it
  • From: Gary G. Little
• Re: DMA transactions
  • From: Ashok Bruno
• Re: Want WDK for Vista(Beta 2)!!!
  • From: Gary G. Little
• Re: Want WDK for Vista(Beta 2)!!!
  • From: Don Burn
• Re: Want WDK for Vista(Beta 2)!!!
  • From: Gary G. Little
• Re: How much knowledge of OS is required using WDF?
  • From: Don Burn
• How much knowledge of OS is required using WDF?
  • From: Junho Ryu
• Re: IRP_MJ_READ asynchronous completion
  • From: Vetzak
• Re: IRP_MJ_READ asynchronous completion
  • From: werner999
• Re: How to inhibit Enabling of I/O Resource
  • From: Mark Roddy
• Re: IRP_MJ_SCSI
  • From: Mark Roddy
• Re: IRP_MJ_READ asynchronous completion
  • From: werner999
• Re: Compiler bug in the DDK--be aware of it
  • From: Isaac Chen
• Re: IRP_MJ_READ asynchronous completion
  • From: Ali
• Re: IoCreateDevice before or after IoInvalidateDeviceRelations
  • From: stan . bell
• Want WDK for Vista(Beta 2)!!!
  • From: darshan . tapdia
• Re: where can I find toaster sample in xpddk?
  • From: Doron Holan [MS]
• Re: IRP_MJ_SCSI
  • From: Doron Holan [MS]
• where can I find toaster sample in xpddk?
  • From: XQing Wang
• Re: Interfacing to Com port driver
  • From: Maxim S. Shatskih
• Re: Interfacing to Com port driver
  • From: David J. Craig
• Re: IRP_MJ_SCSI
  • From: vs
• Re: Compiler bug in the DDK--be aware of it
  • From: Le Chaud Lapin
• Re: USB driver does not start after computer restart
  • From: Leo Havmøller
• Re: Interfacing to Com port driver
  • From: alcompinc
• Re: Interfacing to Com port driver
  • From: Doron Holan [MS]
• Re: IRP_MJ_SCSI
  • From: Doron Holan [MS]
• Re: IoCreateDevice before or after IoInvalidateDeviceRelations
  • From: Doron Holan [MS]
• Suppress command window wile using IExpress wizard
  • From: shaji
• Re: IRP_MJ_READ asynchronous completion
  • From: Jonathan Morrison [MSFT]
• Re: Interfacing to Com port driver
  • From: Gary G. Little
• Re: Interfacing to Com port driver
  • From: Maxim S. Shatskih
• Re: data exchange betwen driver and gui aplication
  • From: Maxim S. Shatskih
• Re: IRP_MJ_SCSI
  • From: Don Burn
• Re: IRP_MJ_SCSI
  • From: vs
• Re: IRP_MJ_SCSI
  • From: Don Burn
• Windows Vista Printer Driver and Printer Name
  • From: NMartins
• IRP_MJ_SCSI
  • From: vs
• Re: SMBus and I2C in USER mode
  • From: Gary G. Little
• Re: Compiler bug in the DDK--be aware of it
  • From: Don Burn
• Re: Serial Port Driver
  • From: Gary G. Little
• Re: Compiler bug in the DDK--be aware of it
  • From: Gary G. Little
• Re: Windows Server 2003 x64 SCSI fibre channel driver
  • From: Don Burn
• Re: IRP_MJ_READ asynchronous completion
  • From: werner999
• IoCreateDevice before or after IoInvalidateDeviceRelations
  • From: stan . bell
• Re: IRP_MJ_READ asynchronous completion
  • From: Ali
• Re: NdisMEthIndicateReceive - no reaction
  • From: arek . ploski
• Re: IRP_MJ_READ asynchronous completion
  • From: werner999
• Re: IRP_MJ_READ asynchronous completion
  • From: Ali
• IRP_MJ_READ asynchronous completion
  • From: werner frischauf
• Re: About Kernel Mode Code Signing in 64 bit Vista
  • From: minway
• Re: InterlockedExchange use
  • From: Eliyas Yakub [MSFT]
• Re: Virtual COM Driver Occurs Surprise Removal Event When CPU Loading is High
  • From: davidma
• Re: USB driver does not start after computer restart
  • From: phamthanhhai
• Re: data exchange betwen driver and gui aplication
  • From: Doron Holan [MS]
• Re: USB driver does not start after computer restart
  • From: Doron Holan [MS]
• Re: NdisMEthIndicateReceive - no reaction
  • From: arek . ploski
• Re: NdisMEthIndicateReceive - no reaction
  • From: Thomas F. Divine [DDK MVP]
• Re: NdisMEthIndicateReceive - no reaction
  • From: Steve Dispensa
• Re: NdisMEthIndicateReceive - no reaction
  • From: soviet_bloke
• NdisMEthIndicateReceive - no reaction
  • From: arek . ploski
• USB driver does not start after computer restart
  • From: phamthanhhai
• Re: InterlockedExchange use
  • From: Pavel A.
• Re: InterlockedExchange use
  • From: Don Burn
• Re: InterlockedExchange use
  • From: r_konjeti
• Re: How to Access hardware buffers thru DShow Interfaces / other A
  • From: courierpt
• Converting kernel-mode print drivers to user mode
  • From: Steve Friedl [MVP]
• Re: data exchange betwen driver and gui aplication
  • From: euacela@xxxxxxxxx
• Re: data exchange betwen driver and gui aplication
  • From: Don Burn
• Re: data exchange betwen driver and gui aplication
  • From: euacela@xxxxxxxxx
• Re: data exchange betwen driver and gui aplication
  • From: Don Burn
• data exchange betwen driver and gui aplication
  • From: euacela
• Re: How to know the BandWidth of a USB 2.0 device?
  • From: Tim Roberts
• Re: InterlockedExchange use
  • From: Steve Dispensa
• Re: ACPI intercepting power button (and lid switch) questions (XP)
  • From: Doron Holan [MS]
• Re: WinXP SDIO Interrupt Handling
  • From: nagu
• Re: local buffer size
  • From: Maxim S. Shatskih
• How do I get a devices "Device Instance ID" programmatically
  • From: Michael
• Re: local buffer size
  • From: r_konjeti
• Re: local buffer size
  • From: Maxim S. Shatskih
• Re: Export Driver
  • From: Maxim S. Shatskih
• USB Audio Device and USB Audio Device (2), how can VC++ mapping out physical PID?
  • From: qubit618
• local buffer size
  • From: r_konjeti
• Re: InterlockedExchange use
  • From: r_konjeti
• Re: InterlockedExchange use
  • From: r_konjeti
• Re: InterlockedExchange use
  • From: Mark Roddy
• Re: ACPI intercepting power button (and lid switch) questions (XP)
  • From: Maxim S. Shatskih
• InterlockedExchange use
  • From: r_konjeti
• Re: virtual printer and file transfert
  • From: Vipin
• Re: Export Driver
  • From: Gary G. Little
• Re: Export Driver
  • From: Gary G. Little
• Re: SMBus and I2C in USER mode
  • From: Gary G. Little
• Setupapi
  • From: Gianluca Varenni
• Export Driver
  • From: Ram Nayak
• Re: Compiler bug in the DDK--be aware of it
  • From: Skywing [MVP]
• Re: Query on USB bus driver
  • From: Eliyas Yakub [MSFT]
• Re: Tutorial for understanding / using the Setup API available for non-C++ wizards?
  • From: Mark Roddy
• Re: Compiler bug in the DDK--be aware of it
  • From: Mark Roddy
• Re: Virtual COM Driver Occurs Surprise Removal Event When CPU Loading is High
  • From: Pavel A.
• Re: Query on USB bus driver
  • From: satheesh . k
• Re: Query on USB bus driver
  • From: satheesh . k
• Re: ACPI intercepting power button (and lid switch) questions (XP)
  • From: Konrad
• Re: WinXP SDIO Interrupt Handling
  • From: soviet_bloke
• WinXP SDIO Interrupt Handling
  • From: nagu
• Re: Virtual COM Driver Occurs Surprise Removal Event When CPU Loading is High
  • From: davidma
• Re: Virtual COM Driver Occurs Surprise Removal Event When CPU Loading is High
  • From: Doron Holan [MS]
• Re: About using Intrinsics in Driver
  • From: SaxenKo
• Virtual COM Driver Occurs Surprise Removal Event When CPU Loading is High
  • From: davidma
• Re: ACPI intercepting power button (and lid switch) questions (XP)
  • From: Doron Holan [MS]
• Re: KMDF CreateFile handler and WdfDeviceInitSetFileObjectConfig
  • From: Doron Holan [MS]
• Re: Query on USB bus driver
  • From: Doron Holan [MS]
• Re: Compiler bug in the DDK--be aware of it
  • From: Beverly Brown
• Re: Tutorial for understanding / using the Setup API available for non-C++ wizards?
  • From: soviet_bloke
• Tutorial for understanding / using the Setup API available for non-C++ wizards?
  • From: Michael
• Re: ACPI intercepting power button (and lid switch) questions (XP)
  • From: Konrad
• Re: KMDF CreateFile handler and WdfDeviceInitSetFileObjectConfig
  • From: Eliyas Yakub [MSFT]
• Re: question for the pro's
  • From: Thomas F. Divine [DDK MVP]
• Re: Why GDI managed bitmaps are GBR instead of BGR or RGB?
  • From: Omer Boyaci
• Re: Horizontal Blanking Interval
  • From: Gennady Mayko
• Can't Get "SRB_INDICATE_MASTER_CLOCK" Ctrl Packet from SRB
  • From: small
• Query on USB bus driver
  • From: satheesh . k
• About using Intrinsics in Driver
  • From: SaxenKo
• Re: How to add an embeddded signature to a Windows Vista X64 bit driver file
  • From: brenner2000il@xxxxxxxxx
• Re: Horizontal Blanking Interval
  • From: Tim Roberts
• Re: [TV Tuner] Horizontal Blanking Interval
  • From: Tim Roberts
• Re: Why GDI managed bitmaps are GBR instead of BGR or RGB?
  • From: Tim Roberts
• Re: ACPI intercepting power button (and lid switch) questions (XP)
  • From: Doron Holan [MS]
• Re: KMDF CreateFile handler and WdfDeviceInitSetFileObjectConfig
  • From: Eliyas Yakub [MSFT]
• Re: _EPROCESS::ProcessExiting and PsGetProcessExitProcessCalled().
  • From: cristalink
• Re: _EPROCESS::ProcessExiting and PsGetProcessExitProcessCalled().
  • From: soviet_bloke
• Re: ACPI intercepting power button (and lid switch) questions (XP)
  • From: Konrad
• Re: ACPI intercepting power button (and lid switch) questions (XP)
  • From: Maxim S. Shatskih
• Re: USB Hub driver
  • From: Maxim S. Shatskih
• Re: Windows CE USB development
  • From: Maxim S. Shatskih
• Re: How to set pattern for wake-up frame ?
  • From: Maxim S. Shatskih
• Re: ZwCreateFile fails for harddisk device
  • From: Maxim S. Shatskih
• Re: Question about SetupDiGetClassDevs and SetupDiEnumDeviceInterf
  • From: Maxim S. Shatskih
• Re: Question about SetupDiGetClassDevs and SetupDiEnumDeviceInterfaces
  • From: Maxim S. Shatskih
• Re: Passive in arbitrary context?
  • From: Maxim S. Shatskih
• Re: When to disable/enable APCs?
  • From: Maxim S. Shatskih
• Re: Creating a KMDF NDIS <==> USB driver
  • From: Maxim S. Shatskih
• RE: KMDF CreateFile handler and WdfDeviceInitSetFileObjectConfig
  • From: emeth_veneeman
• Re: ACPI intercepting power button (and lid switch) questions (XP)
  • From: Konrad
• Re: Windows CE USB development
  • From: kalden
• ACPI intercepting power button (and lid switch) questions (XP)
  • From: Konrad
• Re: USB Hub driver
  • From: Vetzak
• Re: Windows Spooler access in Windows XP not working with UNICODE set
  • From: Chris
• Re: Why GDI managed bitmaps are GBR instead of BGR or RGB?
  • From: Omer Boyaci
• MiniportHalt is not being called
  • From: Paul_Simon
• Re: Windows CE USB development
  • From: Gary G. Little
• Re: Why GDI managed bitmaps are GBR instead of BGR or RGB?
  • From: Omer Boyaci
• Re: install root-enumerated device driver via .MSI file?
  • From: Doron Holan [MS]
• Re: USB Issue
  • From: Doron Holan [MS]
• install root-enumerated device driver via .MSI file?
  • From: bglaudel
• Re: Compiler bug in the DDK--be aware of it
  • From: BubbaGump
• Re: Compiler bug in the DDK--be aware of it
  • From: BubbaGump
• USB Issue
  • From: chandrakant . tripathi
• Re: Send data to Spooler
  • From: Sushma
• Send data to Spooler
  • From: Sushma
• Re: _EPROCESS::ProcessExiting and PsGetProcessExitProcessCalled().
  • From: soviet_bloke
• Re: Horizontal Blanking Interval
  • From: Gennady Mayko
• Re: Compiler bug in the DDK--be aware of it
  • From: Norman Diamond
• Re: Compiler bug in the DDK--be aware of it
  • From: Skywing [MVP]
• Re: Compiler bug in the DDK--be aware of it
  • From: Skywing [MVP]
• Re: Compiler bug in the DDK--be aware of it
  • From: Skywing [MVP]
• Re: Compiler bug in the DDK--be aware of it
  • From: Norman Diamond
• Re: WInXP SDIO Application
  • From: bnarayana_rao
• Re: Compiler bug in the DDK--be aware of it
  • From: RossettoeCioccolato
• Re: problem compiling sample drivers
  • From: Norman Diamond
• Re: Question about SetupDiGetClassDevs and SetupDiEnumDeviceInterf
  • From: Eliyas Yakub [MSFT]
• Re: Creating a KMDF NDIS <==> USB driver
  • From: chris . aseltine
• Re: KMDF CreateFile handler and WdfDeviceInitSetFileObjectConfig
  • From: Doron Holan [MS]
• Re: Question about SetupDiGetClassDevs and SetupDiEnumDeviceInterf
  • From: Doron Holan [MS]
• Re: Compiler bug in the DDK--be aware of it
  • From: Steve Dispensa
• ZwCreateFile fails for harddisk device
  • From: mishra . brijesh
• Re: Address Verification
  • From: soviet_bloke
• Re: Windows Spooler access in Windows XP not working with UNICODE set
  • From: Steve Friedl [MVP]
• Re: Creating a KMDF NDIS <==> USB driver
  • From: Eliyas Yakub [MSFT]
• Re: KMDF CreateFile handler and WdfDeviceInitSetFileObjectConfig
  • From: Eliyas Yakub [MSFT]
• Re: Compiler bug in the DDK--be aware of it
  • From: Gary G. Little
• Re: KSPROPERTY_TYPE_SET cannot return data??
  • From: Max Paklin
• Re: How to Access hardware buffers thru DShow Interfaces / other Apis?
  • From: Max Paklin
• Re: Windows DDK build with Visual Studio 2005?
  • From: Ashok Bruno
• Re: Compiler bug in the DDK--be aware of it
  • From: Eliyas Yakub [MSFT]
• Re: Compiler bug in the DDK--be aware of it
  • From: Gary G. Little
• Re: Compiler bug in the DDK--be aware of it
  • From: BubbaGump
• Re: Address Verification
  • From: peterwie
• Re: When to disable/enable APCs?
  • From: peterwie
• Re: Passive in arbitrary context?
  • From: peterwie
• Re: problem compiling sample drivers
  • From: Mark Roddy
• Re: Compiler bug in the DDK--be aware of it
  • From: Mark Roddy
• Re: Process Validation
  • From: Mark Roddy
• Re: Horizontal Blanking Interval
  • From: Gennady Mayko
• Re: IoGetDmaAdapter Problem
  • From: Andreas Reiff
• Re: When to disable/enable APCs?
  • From: BubbaGump
• Re: When to disable/enable APCs?
  • From: BubbaGump
• Re: Compiler bug in the DDK--be aware of it
  • From: BubbaGump
• Re: Compiler bug in the DDK--be aware of it
  • From: BubbaGump
• Re: Question about SetupDiGetClassDevs and SetupDiEnumDeviceInterf
  • From: chris . aseltine
• Re: Compiler bug in the DDK--be aware of it
  • From: Gary G. Little
• Re: Compiler bug in the DDK--be aware of it
  • From: kalden
• Re: Compiler bug in the DDK--be aware of it
  • From: BubbaGump
• Re: Compiler bug in the DDK--be aware of it
  • From: BubbaGump
• Re: Enumerating CFI capable devices
  • From: Toni
• Re: Enumerating CFI capable devices
  • From: Toni
• Re: DMA transactions
  • From: Eliyas Yakub [MSFT]
• Re: Question about SetupDiGetClassDevs and SetupDiEnumDeviceInterfaces
  • From: Doron Holan [MS]
• Re: Creating a KMDF NDIS <==> USB driver
  • From: chris . aseltine
• Re: Question about SetupDiGetClassDevs and SetupDiEnumDeviceInterfaces
  • From: chris . aseltine
• Re: Passive in arbitrary context?
  • From: Doron Holan [MS]
• Re: Enumerating CFI capable devices
  • From: Doron Holan [MS]
• Re: Creating a KMDF NDIS <==> USB driver
  • From: Doron Holan [MS]
• Re: DMA transactions
  • From: Ashok Bruno
• Re: Creating a KMDF NDIS <==> USB driver
  • From: Eliyas Yakub [MSFT]
• Re: Creating a KMDF NDIS <==> USB driver
  • From: Steve Dispensa
• Re: The driver may be corrupted or missing. (Code 39) - KMDF
  • From: Eliyas Yakub [MSFT]
• Re: NdisInterlocked vs. ExInterlocked
  • From: Eliyas Yakub [MSFT]
• Re: KMDF CreateFile handler and WdfDeviceInitSetFileObjectConfig
  • From: Eliyas Yakub [MSFT]
• Re: DMA transactions
  • From: Eliyas Yakub [MSFT]
• The driver may be corrupted or missing. (Code 39) - KMDF
  • From: vcsrave
• Re: Using NDISProto protocol
  • From: soviet_bloke
• PacketStackSize
  • From: vs
• Re: Creating a KMDF NDIS <==> USB driver
  • From: chris . aseltine
• Re: Using NDISProto protocol
  • From: Steve Dispensa
• Re: Creating a KMDF NDIS <==> USB driver
  • From: Steve Dispensa
• Re: Is it possible to set the IP address from within miniport
  • From: Steve Dispensa
• Re: Alertable wait
  • From: BubbaGump
• Re: DMA transactions
  • From: Maxim S. Shatskih
• Re: Alertable wait
  • From: Maxim S. Shatskih
• Re: IoGetDmaAdapter Problem
  • From: Maxim S. Shatskih
• Re: DMA transactions
  • From: Ashok Bruno
• Re: Process Validation
  • From: Slava Imameyev
• Alertable wait
  • From: BubbaGump
• IoGetDmaAdapter Problem
  • From: Andreas Reiff
• Re: Using NDISProto protocol
  • From: Thomas F. Divine [DDK MVP]
• Question about SetupDiGetClassDevs and SetupDiEnumDeviceInterfaces
  • From: Andrea
• Re: Passive in arbitrary context?
  • From: Maxim S. Shatskih
• Re: Process Validation
  • From: Maxim S. Shatskih
• Re: KMDF CreateFile handler and WdfDeviceInitSetFileObjectConfig
  • From: emeth_veneeman
• Re: Using NDISProto protocol
  • From: Maxim S. Shatskih
• Passive in arbitrary context?
  • From: BubbaGump
• Re: Help in PsSetCreateProcessNotifyRoutine
  • From: Vladimir Zinin
• Re: Using NDISProto protocol
  • From: NYA
• Re: Using NDISProto protocol
  • From: NYA
• Re: Can I programmatically roll back a driver?
  • From: Gary G. Little
• Enumerating CFI capable devices
  • From: Toni
• Re: rtlcopybytes and rtlcopymemory both generate same code
  • From: Pavel A.
• Re: Process Validation
  • From: Mark Roddy
• Help in PsSetCreateProcessNotifyRoutine
  • From: nrohan
• Re: Creating a KMDF NDIS <==> USB driver
  • From: Doron Holan [MS]
• Re: Is it possible to set the IP address from within miniport
  • From: Maxim S. Shatskih
• Re: Is it possible to set the IP address from within miniport
  • From: chris . aseltine
• Re: Creating a KMDF NDIS <==> USB driver
  • From: Maxim S. Shatskih
• Re: Creating a KMDF NDIS <==> USB driver
  • From: Maxim S. Shatskih
• Re: Creating a KMDF NDIS <==> USB driver
  • From: chris . aseltine
• Re: UVC(USB Video Class), MJPEG Format Image Preview Error
  • From: rule
• Re: Creating a KMDF NDIS <==> USB driver
  • From: Doron Holan [MS]
• Re: Creating a KMDF NDIS <==> USB driver
  • From: chris . aseltine
• Re: rtlcopybytes and rtlcopymemory both generate same code
  • From: Norman Diamond
• Re: problem compiling sample drivers
  • From: Norman Diamond
• Re: When to disable/enable APCs?
  • From: Doron Holan [MS]
• Re: When to disable/enable APCs?
  • From: BubbaGump
• Re: When to disable/enable APCs?
  • From: Maxim S. Shatskih
• Re: NDIS IM - problems with NdisSend
  • From: arek . ploski
• Re: problem compiling sample drivers
  • From: Alexander Grigoriev
• Re: problem compiling sample drivers
  • From: Martin G.
• Re: Address Verification
  • From: Doron Holan [MS]
• Re: Address Verification
  • From: soviet_bloke
• Re: Process Validation
  • From: Mark Roddy
• Re: problem compiling sample drivers
  • From: Mark Roddy
• Re: Address Verification
  • From: Doron Holan [MS]
• Re: Creating a KMDF NDIS <==> USB driver
  • From: Doron Holan [MS]
• Re: When to disable/enable APCs?
  • From: BubbaGump
• Re: problem compiling sample drivers
  • From: Martin G.
• Re: NDIS IM - problems with NdisSend
  • From: Thomas F. Divine [DDK MVP]
• NDIS IM - problems with NdisSend
  • From: arek . ploski
• Re: rtlcopybytes and rtlcopymemory both generate same code
  • From: Pavel A.
• Re: Address Verification
  • From: soviet_bloke
• Re: Creating a KMDF NDIS <==> USB driver
  • From: chris . aseltine
• Re: Creating a KMDF NDIS <==> USB driver
  • From: chris . aseltine
• Re: Address Verification
  • From: Doron Holan [MS]
• Re: When to disable/enable APCs?
  • From: Doron Holan [MS]
• Re: When to disable/enable APCs?
  • From: Doron Holan [MS]
• Re: Windows Vista & ACPI
  • From: Maxim S. Shatskih
• RE: bizarre performance issue when TSO is enabled
  • From: Pavel A.
• Re: When to disable/enable APCs?
  • From: Alexander Grigoriev
• Re: Windows Vista & ACPI
  • From: Alexander Grigoriev
• Re: Using NDISProto protocol
  • From: soviet_bloke
• Re: Why GDI managed bitmaps are GBR instead of BGR or RGB?
  • From: Tim Roberts
• RE: problem compiling sample drivers
  • From: Pavel A.
• Re: Address Verification
  • From: soviet_bloke
• Re: Windows Vista & ACPI
  • From: Maxim S. Shatskih
• Re: When to disable/enable APCs?
  • From: Maxim S. Shatskih
• Re: When to disable/enable APCs?
  • From: Maxim S. Shatskih
• Re: When to disable/enable APCs?
  • From: Maxim S. Shatskih
• Re: When to disable/enable APCs?
  • From: BubbaGump
• Re: When to disable/enable APCs?
  • From: Ali
• Re: When to disable/enable APCs?
  • From: Skywing [MVP]
• Re: When to disable/enable APCs?
  • From: Ali
• Re: Windows Vista & ACPI
  • From: Skywing [MVP]
• Re: When to disable/enable APCs?
  • From: Skywing [MVP]
• Re: When to disable/enable APCs?
  • From: BubbaGump
• Re: Full Path for a process
  • From: Mark Roddy
• Re: When to disable/enable APCs?
  • From: BubbaGump
• Re: When to disable/enable APCs?
  • From: BubbaGump
• Re: When to disable/enable APCs?
  • From: BubbaGump
• Re: When to disable/enable APCs?
  • From: BubbaGump
• Re: Creating a KMDF NDIS <==> USB driver
  • From: Maxim S. Shatskih
• Re: Full Path for a process
  • From: Maxim S. Shatskih
• Re: When to disable/enable APCs?
  • From: Maxim S. Shatskih
• Re: When to disable/enable APCs?
  • From: Maxim S. Shatskih
• Re: Debugging in the same machine
  • From: Pavel Lebedinsky [MSFT]
• Re: When to disable/enable APCs?
  • From: Doron Holan [MS]
• Re: When to disable/enable APCs?
  • From: Doron Holan [MS]
• Re: When to disable/enable APCs?
  • From: Steve Dispensa
• Re: When to disable/enable APCs?
  • From: Steve Dispensa
• Re: When to disable/enable APCs?
  • From: BubbaGump
• Re: Windows Vista & ACPI
  • From: Eliyas Yakub [MSFT]
• Re: Creating a KMDF NDIS <==> USB driver
  • From: Doron Holan [MS]
• Re: Creating a KMDF NDIS <==> USB driver
  • From: Eliyas Yakub [MSFT]
• Re: Windows Vista & ACPI
  • From: Doron Holan [MS]
• Re: When to disable/enable APCs?
  • From: Doron Holan [MS]
• Re: Can I programmatically roll back a driver?
  • From: Michael
• Re: Can I programmatically roll back a driver?
  • From: Michael
• Re: Full Path for a process
  • From: soviet_bloke
• Re: Creating a KMDF NDIS <==> USB driver
  • From: chris . aseltine
• Re: Creating a KMDF NDIS <==> USB driver
  • From: Eliyas Yakub [MSFT]
• Re: Using NDISProto protocol
  • From: Thomas F. Divine [DDK MVP]
• Re: Using NDISProto protocol
  • From: Gianluca Varenni
• Re: Using NDISProto protocol
  • From: Maxim S. Shatskih
• cross mapping "USB audio device" to specific USB device descriptor or How to retrieve USB device serial number
  • From: qubit618
• Creating a KMDF NDIS <==> USB driver
  • From: chris . aseltine
• cross mapping "USB audio device" to specific USB device descriptor.
  • From: qubit618
• Re: Using NDISProto protocol
  • From: NYA
• Re: problem compiling sample drivers
  • From: Martin G.
• bizarre performance issue when TSO is enabled
  • From: capricornian
• Re: Can I programmatically roll back a driver?
  • From: peterwie
• Re: Address Verification
  • From: peterwie
• Re: Debugging in the same machine
  • From: peterwie
• Re: problem compiling sample drivers
  • From: Gianluca Varenni
• Re: Using NDISProto protocol
  • From: Steve Dispensa
• Re: problem compiling sample drivers
  • From: Martin Goll
• Re: problem compiling sample drivers
  • From: Gianluca Varenni
• Re: Using NDISProto protocol
  • From: NYA
• Re: Can I programmatically roll back a driver?
  • From: Gary G. Little
• Re: Debugging in the same machine
  • From: Gary G. Little
• Re: Full Path for a process
  • From: Vladimir Zinin
• Re: Kernel debug using 1394, debug message disappear after resume from S3
  • From: Gary G. Little
• Re: Full Path for a process
  • From: Don Burn
• Full Path for a process
  • From: euacela
• Re: Address Verification
  • From: Maxim S. Shatskih
• problem compiling sample drivers
  • From: Martin Goll
• Re: Address Verification
  • From: Maxim S. Shatskih
• Secondary Only Monitor / Disable the "Use This Device As Primary Monitor"
  • From: anshul
• Re: Address Verification
  • From: Maxim S. Shatskih
• Re: install and uninstall of filter drivers
  • From: Maxim S. Shatskih
• install and uninstall of filter drivers
  • From: anders_fogh
• Re: When to disable/enable APCs?
  • From: Maxim S. Shatskih
• Re: Using NDISProto protocol
  • From: Steve Dispensa
• Re: Is it possible to set the IP address from within miniport
  • From: Steve Dispensa
• Re: rtlcopybytes and rtlcopymemory both generate same code
  • From: Norman Diamond
• Re: rtlcopybytes and rtlcopymemory both generate same code
  • From: Doron Holan [MS]
• Re: Using NDISProto protocol
  • From: NYA
• Re: rtlcopybytes and rtlcopymemory both generate same code
  • From: Norman Diamond
• Re: about LockFile
  • From: heavyrainfish
• Re: Using NDISProto protocol
  • From: Thomas F. Divine [DDK MVP]
• Re: rtlcopybytes and rtlcopymemory both generate same code
  • From: Doron Holan [MS]
• Using NDISProto protocol
  • From: NYA
• Re: Can I programmatically roll back a driver?
  • From: Michael
• Re: KMDF CreateFile handler and WdfDeviceInitSetFileObjectConfig
  • From: Eliyas Yakub [MSFT]
• Re: rtlcopybytes and rtlcopymemory both generate same code
  • From: cristalink
• Re: KMDF CreateFile handler and WdfDeviceInitSetFileObjectConfig
  • From: emeth_veneeman
• Re: Is it possible to set the IP address from within miniport
  • From: Maxim S. Shatskih
• Re: How to show media/cable disconnected
  • From: Steve Dispensa
• Why GDI managed bitmaps are GBR instead of BGR or RGB?
  • From: Omer Boyaci
• Re: Can I programmatically roll back a driver?
  • From: peterwie
• Re: display driver handling IOCTL_VIDEO_HANDLE_VIDEOPARAMETERS
  • From: mudeem
• Re: KMDF CreateFile handler and WdfDeviceInitSetFileObjectConfig
  • From: Eliyas Yakub [MSFT]
• Is it possible to set the IP address from within miniport
  • From: Arsalan Ahmad
• Re: How to show media/cable disconnected
  • From: Arsalan Ahmad
• Printer Driver Landscape printing issue
  • From: Nitin
• About 1c_wlan_bssidlist in NDIS driver test
  • From: fifi_feng
• About 1c_wlan_bssidlist in NDIS driver test
  • From: fifi_feng
• Re: test - ignore
  • From: Ali
• Re: Strange message in setupapi.log
  • From: Kevin
• Re: WDM or KMDF ?
  • From: Robert Lluís
• Re: USB camera: ISO transfer ASAP?
  • From: Tim Roberts
• Re: Printer driver Question
  • From: Steve Friedl [MVP]
• Re: Can I programmatically roll back a driver?
  • From: Michael
• Re: Debugging in the same machine
  • From: anshul
• Re: Can I programmatically roll back a driver?
  • From: Michael
• Printer driver Question
  • From: codejunkie
• Re: How to show media/cable disconnected
  • From: Maxim S. Shatskih
• Re: display driver handling IOCTL_VIDEO_HANDLE_VIDEOPARAMETERS
  • From: Maxim S. Shatskih
• Re: NDIS IM driver crashes
  • From: Maxim S. Shatskih
• test - ignore
  • From: peterwie
• Re: WDM or KMDF ?
  • From: peterwie
• Re: OID_PNP_SET_POWER ?
  • From: Skywing [MVP]
• Re: How to show media/cable disconnected
  • From: Arsalan Ahmad
• Re: WDM or KMDF ?
  • From: Skywing [MVP]
• Re: Debugging in the same machine
  • From: Gary G. Little
• Re: How to show media/cable disconnected
  • From: QuasiCodo
• Re: Can I change driver resume sequence from stand by ? (XP ,Vista)
  • From: Doron Holan [MS]
• How to show media/cable disconnected
  • From: Arsalan Ahmad
• BugCheck 0x24 NTFS_FILE_SYSTEM
  • From: Robin
• Re: NDIS IM driver crashes
  • From: Don Burn
• Re: NDIS IM driver crashes
  • From: balamurali_r
• Disable "Use This Device As Primary Monitor" Always Secondary Monitor
  • From: anshul
• Re: WDM or KMDF ?
  • From: Don Burn
• WDM or KMDF ?
  • From: Robert Lluís
• UVC(USB Video Class), MJPEG Format Image Preview Error
  • From: rule
• Can I change driver resume sequence from stand by ? (XP ,Vista)
  • From: Morris Chang
• Re: How to install driver automatically
  • From: Duy Trinh
• Re: Pseudo device or virtual COM port
  • From: md
• display driver handling IOCTL_VIDEO_HANDLE_VIDEOPARAMETERS
  • From: mudeem
• Re: Strange message in setupapi.log
  • From: Scott Robins
• Re: WDF and 32 bit process
  • From: Doron Holan [MS]
• Re: Pseudo device or virtual COM port
  • From: Doron Holan [MS]
• Re: getjob() function
  • From: Steve Friedl [MVP]
• Re: getjob() function
  • From: Steve Friedl [MVP]
• Re: SetUpDi functions between 2k and XP
  • From: chris . aseltine
• Re: bitmap printer driver
  • From: Steve Friedl
• Re: SetUpDi functions between 2k and XP
  • From: r_konjeti
• Re: SetUpDi functions between 2k and XP
  • From: chris . aseltine
• Re: KSPROPERTY_TYPE_SET cannot return data??
  • From: Max Paklin
• SetUpDi functions between 2k and XP
  • From: r_konjeti
• Re: Driver Communication...
  • From: peterwie
• Re: Max URB size (USB driver)
  • From: kalden
• any place on drivers for win98 and debuggers
  • From: fufus
• Re: WDF and 32 bit process
  • From: Ashok Bruno
• Re: Can't DriverPackageUninstall() from DriverStore when OEMxx.INF is missing
  • From: chris . aseltine
• unidrv printers - where are the settings?
  • From: heathy
• unidrv printers - where are the settings?
  • From: heathy
• Re: Pseudo device or virtual COM port
  • From: Don Burn
• Re: Pseudo device or virtual COM port
  • From: md
• Re: Debugging in the same machine
  • From: Arsalan Ahmad
• Re: Pseudo device or virtual COM port
  • From: Don Burn
• Pseudo device or virtual COM port
  • From: md
• Re: Max URB size (USB driver)
  • From: kalden
• Re: Debugging in the same machine
  • From: Mark J . Cariddi
• Setup API in VISTA - installing printer
  • From: Robert
• Re: Debugging in the same machine
  • From: Don Burn
• Re: Debugging in the same machine
  • From: james_ibberson
• USB low speed transfer rates
  • From: james_ibberson
• Re: Debugging in the same machine
  • From: Don Burn
• Debugging in the same machine
  • From: Arsalan Ahmad
• Re: NDIS IM driver crashes
  • From: balamurali_r
• Re: WinXP SDIO INF
  • From: nagu
• Re: Question about Driver Communication...
  • From: Maxim S. Shatskih
• ndisip.sys documentation help
  • From: tsindia
• Re: NDIS IM driver crashes
  • From: Alireza Dabagh [MS]
• NDIS IM driver crashes
  • From: balamurali_r
• Kernel debug using 1394, debug message disappear after resume from S3
  • From: Morris Chang
• Re: Strange message in setupapi.log
  • From: Kevin
• Re: about LockFile
  • From: heavyrainfish
• Re: Max URB size (USB driver)
  • From: Doron Holan [MS]
• Re: I got a BSOD after calling IoCallDriver
  • From: Eliyas Yakub [MSFT]

We are proud to have Web Hosting and Rack Housing from 9 Net Avenue Deutschland.
(18)