Re: USB Address descriptor HCT test on amd64

Bus analyzers are independent of the host system, they just monitor the bus
and know nothing of the host.

Visit http://www.lvr.com

Marco
________________________
Marc Reinig
UCO/Lick Observatory
Laboratory for Adaptive Optics

"Denny" <Denny@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:CC6B5CDD-FF31-4652-A573-9A4CCE7EAE7D@xxxxxxxxxxxxxxxx
Thanks for the suggestion.I cannot use a KB since I don't have an extra
mechine to lookup. Can you please suggest me a bus analyzer available for
64
bit XP and tell what I have to look for?
Thanks,
--Denny


"Marc Reinig" wrote:

Have you hooked up a USB bus analyzer and/or a kernel debugger to see
what
is going on?

--
Marco
________________________
Marc Reinig
UCO/Lick Observatory
Laboratory for Adaptive Optics

"Denny" <Denny@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:C91BF1DB-ED26-430F-A791-1A9F69D5E622@xxxxxxxxxxxxxxxx
Hi,
I have a usb driver ported to 64-bit and I'm tryng to get it HCT
certified.
The driver giving me issues on USb Descriptor,Address descriptor
tests.Basically the driver gets unloaded when the test starts and the
test
hangs for ever. I got it passed successfully on all tests on the 32-bit
platform(XP SP2) ; My installation is XP 64-bit SP1. The driver works
fine
with native 32-bit application on the same 64-bit platform. I also get
the
verifier test passed. The above tests not writing any error logs , the
only
thing I can see in the logs is initalizing and if I terminated it
forcefully,
it says terminated. Any help will be very much appriciated.I tried the
device
on mutiple ports of the test meachine but the result is same.
Thanks


.



.

Relevant Pages