Re: RS232 to USB Help

I've never seen USB to serial work reliably above 9600 bps. I'd rcommend you
get a Socket PCMCIA serial card and have a true serial connection.

--
Gary G. Little

<malleus12@xxxxxxxxxxx> wrote in message
news:1125427813.876971.221730@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>I have a program written in VB6 which uses the MSComm control to
> communicate with a device over the serial port. I want to be able to
> use the device with an RS232 -> USB converter so that I can use it on
> laptops that do not have an RS232 port. I have bought several
> different RS232 to USB converters and none of them work with my device.
> Is there something that I need to change or add in my software in
> order to get the device to work with an RS232 to USB converter? Any
> advice or links you can provide me would be greatly appreciated.
>


.

Relevant Pages

  • Re: Wireless joystick for the Apple II?
    ... USB, then any wireless USB mouse with a receiver could be used. ... USB converter will be DEVICE-side, not HOST-side USB, therefore will ... down response too much) and convert that timing variation into a ...
    (comp.sys.apple2)
  • Re: Serial to USB modem.
    ... unfortunately without modem. ... Also I have serial to USB converter, ... > serial port without such vendor drivers. ...
    (comp.sys.mac.hardware.misc)
  • Re: USB port URGENT
    ... usb converter to serial DB9 but i don't know if MATLAB recognize DB9 ... The fact that the serial convertor is on a USB port should be transparent. ...
    (comp.soft-sys.matlab)
  • Re: Wireless joystick for the Apple II?
    ... USB, then any wireless USB mouse with a receiver could be used. ... USB converter will be DEVICE-side, not HOST-side USB, therefore will ... simple analog voltage. ...
    (comp.sys.apple2)
  • Re: hp laserjet to usb
    ... | - A Centronix to USB converter ... | - USB print server with a Centronix socket ... | - A TCP/IP print server with a Centronix socket ...
    (microsoft.public.windowsxp.general)
Loading