Re: USBSTOR.SYS


Z40 is from a company called BTC ( Taiwan ).
They have a US web site: www.btc.com

In Germany this device is under the label of CnMemory.

It is a "memory stick", internally it seems to be a
1" HDD. Interface is USB 2.0.

Frank




"Pavel A." wrote:

> What is this "Z40" - flash? hard disk with usb adapter?
> --PA
>
>
> "Frank L." <f_laudahn@xxxxxxxxx> wrote in message news:OcWkaFBrFHA.908@xxxxxxxxxxxxxxxxxxxxxxx
> >A Z40 USB device ( 4.0 G ) got unaccessible after the W2K came up with the
> >
> > error message "Write delay failed". This was because I tried to copy a file
> >
> > that is 136 M in size.
> >
> > May be the real issue arose when I unplugged the USB device instead of
> >
> > correctly notifying W2K of my intention to unplug it.
> >
> > Has any one an idea why the driver USBSTOR.SYS does not access the device in
> >
> > RAW mode ? Is there a way to access the device at all from now on ?
> >
> > Does any have a driver that would allow me to access the device ?
> >
> > USBSTOR.SYS returns RC=10 ( device does not start ). No tool I have can
> >
> > access the device.
> >
> > Anyone any idea ??
> >
> > Thanks,
> >
> > Frank
> >
> > PS: I run W2K US version, SP 4
> >
> >
>
>
>
.

Relevant Pages

  • windows not notified when usb device reset
    ... My USB device is powered up alone and has a reset ... Typically if I unplug the cable or power off the board, ... cable in and a driver installed and everything works great ever since. ... However, if I reset the board, there's not pnp happening on windows. ...
    (microsoft.public.development.device.drivers)
  • Re: Usb GPS installation problem
    ... But the problem starts when unplugging and and plugging again. ... > can I disable USB device detection when connecting the gps to usb port. ... system will find the right driver. ... stop the device before you unplug it. ...
    (sci.geo.satellite-nav)
  • RE: USBSTOR.SYS
    ... This is why I need to have a driver that accesses this device in RAW mode. ... "Frank L." ... > correctly notifying W2K of my intention to unplug it. ...
    (microsoft.public.development.device.drivers)
  • Re: USB not detected - help
    ... If I connect the device after the OS is loaded, "Unidentified USB device" ... I copied the dll after installing the CAB file from the CE device. ... debugzones in your usb host driver, you should see some information about ... Check for other registry keys besides the one I mentioned. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: USB not detected - help
    ... USB device popup *didnot* come. ... Without installing the Cab file, ... debugzones in your usb host driver, you should see some information about ... Check for other registry keys besides the one I mentioned. ...
    (microsoft.public.windowsce.platbuilder)