Re: Telephony service will not start, error 1053

Why , correct one is microsoft.public.windowsnt.protocol.ras or
microsoft.public.win32.programmer.tapi


Arkady

"Wim N" <WimN@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:D8F56B04-6659-4A79-900E-182FCE0CB69E@xxxxxxxxxxxxxxxx
> Hello Floyd,
>
> Thanks for the response.
> Sorry, but I could not find a more suitable newsgroup for this question.
> If
> you know a better one, please let me know.
>
> I've already deinstalled and reinstalled the modem with the latest
> drivers.
> When you go into the 'Devicemanager | Modems' and you select
> 'Diagnostic'
> and click on the 'Query modem' the modem will give a response and it makes
> sense too! Re-installing Unimodem is more a Windows95 thing and not W2K.
>
> In the event logs there is no info about this.
>
> It looks like the TAPI layer is corrupted .
>
> The strange thing is that I also get errors telling me that there is
> already an installation going on: "You can only install one device at a
> time". I could not find any info about this in the KB.......
>
>
> "Floyd Burger" wrote:
>
>> Wim,
>> This newsgroup is geared more towards device driver developers.
>>
>> Try updating your modem drivers. If that doesn't help, uninstall the
>> modem
>> drivers. If that doesn't do it, reinstall Unimodem/V
>> (http://support.microsoft.com/kb/q139383/). There should also be an
>> entry
>> in the event log (Control Panel | Administrative Tools | Event Viewer.
>> That
>> might give you more info as to why the service is failing to start.
>>
>> --
>> Floyd
>>
>> "Wim N" <WimN@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
>> news:DA2CB982-483C-4B9D-8EA2-76F9E12754B4@xxxxxxxxxxxxxxxx
>> > The 'Phone and modem options' in the controlpanel have stopped working.
>> > I've
>> > traced it to the 'Telephony' service that will not start. I gives a
>> > 1053
>> > error telling me that the service could not be started. To my knowledge
>> > nothing changed in the configuration. The OS is W2K Server (english
>> > version).
>> > Untill now WinFax has always worked without a problem (simple modem
>> > connected
>> > to COM2), now it will not work anymore because of these errors. Any
>> > idea
>> > what
>> > could be wrong ?
>>
>>
>>


.

Relevant Pages

  • Re: setting up the fax
    ... Faxing can be done over a phone line using a data/fax analog modem. ... drivers for that motherboard must get installed. ... to install, troubleshoot, and configure a hardware voice/data/fax modem ... minutes to receive faxes for free, and there's no setup to send faxes ...
    (microsoft.public.windowsxp.general)
  • Re: Removing Internal Modems on Older Ultra-Light Laptops
    ... Physically removing (for reasons which shall remain unspecified for ... certain personal reasons) ... If you can't find the modem port I can't help you much with this ... you also mentioned removing drivers. ...
    (comp.sys.laptops)
  • Re: Modems...?
    ... as well as the 'show hidden devices' you've found there's a cmd level ... > drivers, if any, may be holding me up. ... >>the modem. ... >>> I really need to get the server electronic faxing up ...
    (microsoft.public.windows.server.sbs)
  • Re: Modem Options
    ... Modem candidates are at PCI_buses: 00:0a.0 ... Achieving function with these drivers is often difficult. ... The installation creates a driver sm56.o, ... For HSF modems. ...
    (comp.os.linux.hardware)
  • Re: Winmodem symlink
    ... > I did not get a response to this issue from the list but did get a ... >> drivers such as our HSF driver. ... >> installed to handle the modem right now. ... Chadley - Linux Rocks ...
    (Fedora)