Telephony service will not start, error 1053

From: "Wim N" <WimN@xxxxxxxxxxxxxxxxxxxxxxxxx>
Date: Mon, 8 Aug 2005 13:07:02 -0700

The 'Phone and modem options' in the controlpanel have stopped working. I've
traced it to the 'Telephony' service that will not start. I gives a 1053
error telling me that the service could not be started. To my knowledge
nothing changed in the configuration. The OS is W2K Server (english version).
Untill now WinFax has always worked without a problem (simple modem connected
to COM2), now it will not work anymore because of these errors. Any idea what
could be wrong ?
.

Follow-Ups:
- Re: Telephony service will not start, error 1053
  - From: Floyd Burger

Prev by Date: Problem when using MmWriteCombined in MmMapIoSpace
Next by Date: Re: Can't print to minidriver from 32-bit apps on XP 64-bit
Previous by thread: Problem when using MmWriteCombined in MmMapIoSpace
Next by thread: Re: Telephony service will not start, error 1053
Index(es):
- Date
- Thread

Relevant Pages

Re: Mixed language networtk
... this will work without problem even if you setup the server as Active ... > available here only in english version. ... > french windows xp. ... > configuration. ...
(microsoft.public.windows.server.setup)
Re: SBS SP 1 installation error
... Component Name: Microsoft Exchange Forest Preparation ... Component Name: Server Configuration ... Component Name: Windows Server 2003 Configuration ... Component Name: Networking Configuration ...
(microsoft.public.windows.server.sbs)
Re: SBS 2003 Misconfigured?
... The netgear has a setting for the Internet IP which is set to the ... DNS server address is set to SBS server's ip 192.168.5.109 ... but something else is clearly awry if you can't get DHCP ... Which, based on the configuration you gave, is part of the problem. ...
(microsoft.public.windows.server.sbs)
Re: SBS 2003 Misconfigured?
... The netgear has a setting for the Internet IP which is set to the ... DNS server address is set to SBS server's ip 192.168.5.109 ... DHCP working - and as Cliff says, that should be a simple thing. ... Which, based on the configuration you gave, is part of the problem. ...
(microsoft.public.windows.server.sbs)
RE: ceicw fails every time
... I'd like confirming CEICW steps with you to ensure there is not problem ... You have to rerun the CEICW to make sure your SBS 2003 server have right ... On the "Services Configuration" page, select all the items and then ... Calling CCertCommit::ValidatePropertyBag ...
(microsoft.public.windows.server.sbs)