Re: problems with NetBT

Sorry, but I don't get what you are trying to do.

Are you saying you have two physical NICs, and each of them is
connected to a separate physical network?

That is just what we all do every day, right?

Otherwise, are the two NICs connected to the same physical network?
Still not much of an exceptional setup. IP and ARP don't care for
packets of foreign IP subnets.

So what is it that you are trying to do here?

Stephan
---
Michal Filka wrote:
> Hi all,
> I try to do a software bridge using NDIS IM. My computer has two NICs each
> connected into one network segment. The idea was that in created (logical)
> networ my computer would have two IP adresses (for each NIC one), so it
> should look like a multihomed computer.
>
> Problem occured when I tryed to "use" created network using "My
> Neighbourhood". Sometimes everything works fine, but sometimes not and
> message "Network Path Not Found" appears when I try to show list of
> computers in workgroup. It happens ussually in situation when a NetBT
> packets are sent into one network segment using (as source) IP address of
> NIC connected to the other one. There shouldn't be problem in used IP
> address, my computer should have same behaviour for both IP's (associated
> with my NICs). Can there be any conflict inside of NetBT ?
>
> Any ideas are welcome.
>
> Thanks for answers
> Michal

.

Relevant Pages

  • Re: Install 3 times (triple crown)
    ... Build the customer SBS box enabling both nics ... network, as are the wan nics of the SBS boxes. ... how far can you go with the installation? ...
    (microsoft.public.windows.server.sbs)
  • Re: Vista client lost connection to secure wireless network ?
    ... We'll contact Dell to check if they can provide us with some other driver or we will see if we can order Intel NICs and put them in the laptops. ... wireless networks the PC has connected to, with your local wireless at the top. ... The laptop would connect flawlessly to my guest network, but not to the secure network that's configured according to Owen's documentation. ... By "deleting out that Wireless network config for that specific configuation and set it up again" do you mean flattening out the AP configs, the IAS configuration, etc. and redo all that configuration work? ...
    (microsoft.public.windows.server.sbs)
  • Re: Server with 3 NICs
    ... The network administrative work too much. ... you will not be very stable with the third NIC card, ... > OS 2003 With Isa needs a Nic for Internet connection, ... >>OS will query the three NICs. ...
    (microsoft.public.backoffice.smallbiz)
  • RE: Unexplained delays access files in windows share from explorer
    ... | The critical question in determining which steps to use is "how many NICs ... | RSS can provide significant performance enhancements if your network ... | Most of the issues we've seen are related to older NIC drivers that do ... Disable Offloading on the Advanced Properties of the NIC ...
    (microsoft.public.windows.server.general)
  • SUMMARY:network time outs
    ... I did find a very useful web page about tuning network settings: ... Most of my testing has been with NFS where I can easily saturate a GbE ... vmunix: alt0: 1000 Mbps full duplex Link Up via autonegotiation ... card can only be set to autonegotiate (usually we force the nics on our ...
    (Tru64-UNIX-Managers)