Re: PC won't boot if my device is connected to the USB port
- From: "David Craig" <NoOne@xxxxxxxxxxx>
- Date: Thu, 26 May 2005 11:45:11 -0700
Try dumping the USB descriptors, VID & PID and see if the 'phone' is saying
it is a mass storage device. Of course, the BIOS could be bad too and you
haven't said if the system has the latest version installed much less what
MB & BIOS it is.
<mridupawan.das@xxxxxxxxx> wrote in message
news:1117112221.527414.267570@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> it is not a mass storage device at all.
> it is a phone. I tried usbman.com but there too they have said about
> mass storage devices having such problems when the PC tries to boot off
> the usb connected drive.
> my device is connected to the pc through the mrouter and it is actually
> a serial connection over usb.
> it appears as a com port to the user.
> but i can't figure out why the pc would stall even if enumeration fails
> during boot time.
> the host is not supposed to wait for some reply from device if device
> doesn't reply.
> the Host should time out and resume booting.
> ??
>
.
- References:
- PC won't boot if my device is connected to the USB port
- From: mridupawan . das
- Re: PC won't boot if my device is connected to the USB port
- From: Robert Marquardt
- Re: PC won't boot if my device is connected to the USB port
- From: mridupawan . das
- PC won't boot if my device is connected to the USB port
- Prev by Date: RE: where is USBVideo.sys?
- Next by Date: Re: Correct group for WDM development??
- Previous by thread: Re: PC won't boot if my device is connected to the USB port
- Next by thread: Re: PC won't boot if my device is connected to the USB port
- Index(es):
Relevant Pages
|
