Support for loading NIC firmware in NDIS
Does exist some miniport functions in NDIS library,
that facilitates to load new firmware into NIC ?
(Some function that has for example parameter - address and length of new
firmware code and after calling it loads new firmware into NIC)
I did not find no such function and it seems that this problem can not be
solved
with NDIS library.
Thanks !
Peter
.
Relevant Pages
- Re: [GIT *] Allow request_firmware() to be satisfied from in-kernel, use it in more drivers.
... This whole "working device" argument is total bullshit. ... If the driver was a module before, it needed a module load to become ... If you could load the module, you could load the firmware. ...
(Linux-Kernel) - Re: FC2: Question about hotplugging
... >> loads the module and the firmware but when I boot the laptop the module ... >> gets loaded automatically but it can't find the firmware. ... >> and the module will load and it will find and load the firmware. ... Detected ipw2100 PCI devoce at 0000:02:04.0, dev: eth1, mem ...
(Fedora) - Re: ipw2100 + Debian etch + Firmware trouble + 2.6.22
... since i moved from 2.6.18 to 2.6.22 my wlan interface stopped working. ... ipw2100: eth1: Firmware 'ipw2100-1.3.fw' not available or load failed. ... I do use udev, though. ...
(Debian-User) - Re: [GIT *] Allow request_firmware() to be satisfied from in-kernel, use it in more drivers.
... On Tue, 15 Jul 2008, Willy Tarreau wrote: ... But once you can load a module, you can load the firmware. ... And if the driver was built-in, you can still build in the firmware. ...
(Linux-Kernel) - Re: AlphaStation 200 F4 error
... That means its test F3 that failed; the service guide says "Load the ... The mini-console is a feature built into the SROM firmware of most ...
(comp.os.vms) |
|
