Re: BTS 2004 Config Failure - XP SP2 in HWS Runtime - SUCCESS

Tech-Archive recommends: Speed Up your PC by fixing your registry

From: Ben (benjy_at_allfreetec[NOSPAMDOT)
Date: 01/26/05 

Date: Wed, 26 Jan 2005 00:42:55 -0000

Hi,
.NET 2.0 framework?, no i dont.

But the installation has finally succeeded. It appears that the Dr Watson
error message at the HWS config stage is a red herring and doesnt really
mean anything (let me see once i get to build some HWS stuff) . Actually it
does not roll back the config when it fails here and if you check the
computer , the BTS software is all installed. I tried running a sample
orchestration and it worked too.

I hope it hasnt played havoc with any internals of HWS but i will know when
i start developing with the HWS API.

For now, I'll keep my fingers crossed.

Thanks for all the help

Cheers
Ben

"Asbjørn Rygg" <a-rygg@online.no.invalid> wrote in message
news:%23MlQIqiAFHA.3592@TK2MSFTNGP11.phx.gbl...
> Hi,
>
> Just a guess from my side - but do you have .Net Framework 2.0 Beta
> installed? I had an issue with installing and configuring HWS when
> installing Biztalk on a machine with v2.0 of the framework.
>
> The sollution, from somewhere I cannot find at this moment, was to install
> and configure BizTalk without HWS, then install and configure HWS after
> BizTalk is configured.
>
> HTH,
> Asbjørn
>
> Benjy wrote:
>> Hi,
>> My DTC Clients are turned on. I checked the the SSO suppport article.
>> I have already done then RPC settings. As it did yesterday, it goes
>> past the SSO stage and fails at HWS configguration and does not
>> specify any problem!!! Here is an excerpt from the Config log file and
>> the final 4 event log messaages (again, all indicating success).
>>
>> I just cant understand it ... I even checked and installed every single
>> pre-requsisite listed on
>> Lukes blog
>> http://blogs.msdn.com/luke/articles/211384.aspx
>>
>> ----
>> Excerpt from Config Log
>> --------
>> [13:06:12 Info CRuntimeCfg] Configuring feature: HwsRuntime
>> [13:06:12 Info ConfigHelper] Found site ID (1) for site Default Web
>> Site
>> [13:06:12 Info ConfigHelper] Detected IIS version: 5
>> [13:06:12 Info ConfigHelper] Retrieved INSTALLDIR: C:\Program
>> Files\Microsoft BizTalk Server 2004\
>> [13:06:12 Info ConfigHelper] Virtual root HwsMessages already exists
>> in site 1
>> [13:06:14 Info ConfigHelper] Deleted IIS application: HwsMessages
>> [13:06:14 Info ConfigHelper] Deleted IIS virtual root: HwsMessages
>> [13:06:14 Info ConfigHelper] Detected IIS version: 5
>> [13:06:14 Info ConfigHelper] Created IIS virtual root: HwsMessages
>> [13:06:16 Info ConfigHelper] Created IIS application: HwsMessages
>> [13:06:16 Info ConfigHelper] Set identity: \BizTalkHWS on COM+
>> application: IIS-{Default Web Site//ROOT/HwsMessages}
>> [13:06:16 Info ConfigHelper] Member \BizTalkHWS was not added to NT
>> group BizTalk Isolated Host Users because it already exists in the
>> group
>> [13:06:16 Info ConfigHelper NetAPI Info: ] The specified account name
>> is already a member of the local group.
>> [13:06:23 Info ConfigFramework] Waiting for configuration thread to
>> complete.
>> [13:06:33 Info ConfigFramework] Waiting for configuration thread to
>> complete.
>>
>> -----------
>> Thats it. It then throws up a message saying I need to inform
>> Microsoft.
>>
>> ---
>> LOG FILES
>> --------
>>
>> The user "MYDOMAIN\myuser" deployed the assembly
>> "Microsoft.BizTalk.Hws.HwsPromotedProperties, Version=3.0.0.0,
>> Culture=neutral, PublicKeyToken=31bf3856ad364e35" containing property
>> schemas.
>>
>>
>> The description for Event ID ( 1000 ) in Source ( Microsoft BizTalk
>> Server 2004 Configuration Wizard ) cannot be found. The local computer
>> may not have the necessary registry information or message DLL files
>> to display messages from a remote computer. You may be able to use the
>> /AUXSOURCE= flag to retrieve this description; see Help and Support
>> for details. The following information is part of the event:
>> configframework.exe, 3.0.4902.0, ntdll.dll, 5.1.2600.2180, 0002e12a.
>>
>> The description for Event ID ( 1001 ) in Source ( Microsoft BizTalk
>> Server 2004 Configuration Wizard ) cannot be found. The local computer
>> may not have the necessary registry information or message DLL files
>> to display messages from a remote computer. You may be able to use the
>> /AUXSOURCE= flag to retrieve this description; see Help and Support
>> for details. The following information is part of the event:
>> 134241004.
>>
>>
>> The master secret has not been backed up. If you lose the master
>> secret all the information stored in the SSO system will be lost
>> permanently and your systems may fail to work correctly. Please use
>> the SSO admin tools to back up your master secret.
>>
>> For more information, see Help and Support Center at
>> http://go.microsoft.com/fwlink/events.asp.
>>
>>
>>
>> --------------------------------------------------------------------------------
>> From: Asbjørn Rygg (a-rygg@online.no.invalid)
>> Subject: Re: BTS 2004 Config Failure - XP SP2 in HWS Runtime Hi,
>>
>> Every action in ConfigFramework is logged to a Config.log file in your
>> %temp% directory. It is hard to tell what`s actually failing in your
>> setup without more details on what the exact error message is when it
>> occurs and so on. The Config(timestamp).log file will have logged the
>> ERROR messages that occurs - cut and paste them here and it would be
>> easier to diagnose your exact problem.
>>
>> Here`s a small checklist of things to try out:
>> Have you turned on DTC Clients (SP2 turns it off)?
>> Have you tried
>> http://support.microsoft.com/default.aspx?scid=kb;en-us;841893 - if
>> this
>> is the error you are receiving?
>> Have you read through the troubleshooting guide in the documentation
>> for
>> any hints?
>> http://www.msdn.microsoft.com/library/default.asp?url=/library/en-us/troubleshooting/htm/ebiz_depl_config_ioyy.asp
>>
>> HTH,
>> - Asbjørn

Relevant Pages

  • Re: BTS 2004 Config Failure - XP SP2 in HWS Runtime
    ... installing Biztalk on a machine with v2.0 of the framework. ... install and configure BizTalk without HWS, ... > Excerpt from Config Log ...
    (microsoft.public.biztalk.general)
  • BTS 2004 Config Failure - XP SP2 in HWS Runtime
    ... domain user with full admin rights to the machine). ... This time it went past the SSO config stage ... then i deleted the db's and restarted and then HWS runtime ... Next time i did the config SSO failed again and then HWS after that. ...
    (microsoft.public.biztalk.general)
  • Re: location of popup helpers question
    ... where installing a mouse driver take 4 ... :) And a restart or reboot will not change anything now as ... kmail filesystem to eventually eat our respective lunches. ... [root@coyote config]# ls -l kmailrc ...
    (Fedora)
  • [SLE] realplayer init config screens garbled
    ... After installing the realplayer linux rpm from the link at the real.com ... config screen is full of little square boxes where the text should be. ... The player itself, visible briefly behind the config boxes, seems to ...
    (SuSE)
  • Re: BTS 2004 Config Failure - XP SP2 in HWS Runtime
    ... > domain user with full admin rights to the machine). ... This time it went past the SSO config stage ... then i deleted the db's and restarted and then HWS runtime ... Next time i did the config SSO failed again and then HWS after that. ...
    (microsoft.public.biztalk.general)