ISA RAS configuration??

Hello.

I have a question about ISA VPN configuration.
I have sbs2000 with 2 NICS configured has infomation below:

Z:\>ipconfig /all

Windows 2000 IP Configuration

Host Name . . . . . . . . . . . . : golias
Primary DNS Suffix . . . . . . . : CANNONHYGIENE.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : CANNONHYGIENE.local

Ethernet adapter Internal:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : HP NC7781 Gigabit Server Adapter
Physical Address. . . . . . . . . : 00-0B-CD-0C-5A-5B
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.0.0.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 10.0.0.1
Primary WINS Server . . . . . . . : 10.0.0.1

Ethernet adapter External:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : HP NC7771 Gigabit Server Adapter
Physical Address. . . . . . . . . : 00-11-0A-86-88-3D
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.100.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.100.2
DNS Servers . . . . . . . . . . . : 10.0.0.1
NetBIOS over Tcpip. . . . . . . . : Disabled

The router where the ISA external card is connected is 192.168.100.2.

Our branches have routers with the following IP scheme:

10.0.2.2 mask 255.255.255.0
10.0.4.2 mask 255.255.255.0
10.0.5.2 mask 255.255.255.0
10.0.6.2 mask 255.255.255.0
10.0.7.2 mask 255.255.255.0

-When i try to acess one branck from another branche everything goes well.
-If i try to access the SBS network ican connect to the SBS server but i
can't connect to any of the machines inside the network.
-If i try to connect one branch from the a computer inside the SBS network
is also not possible, only if i connect directly from the ISA server.

In some posts i have read that we need to configure RAS, i'm not sure if i
need to do this.

Could anyone give me some ideas about what i must do, if necessary please
put some aditional questions.

Nuno Santos
.

Relevant Pages

  • Re: Problems with rebuilt Desktop
    ... I'm convinced it's another ISA issue but I'm not sure where to look. ... > Windows IP Configuration ... > Ethernet adapter Intel Gb: ... > aswell (but I'll post the IPConfig for that aswell if you wish. ...
    (microsoft.public.windows.server.sbs)
  • Re: Problems with rebuilt Desktop
    ... Windows IP Configuration ... Ethernet adapter Intel Gb: ... My ISA config is screwed up somehow? ...
    (microsoft.public.windows.server.sbs)
  • Re: \XXX is not accessible. you might not have permission to use this network resource!
    ... Your client machine points to the ISA server as DNS server and not to the ... I think it would be a good solution to post this special configuration ... Ethernet adapter LAN: ...
    (microsoft.public.windows.server.general)
  • Re: VPN PPTP problem
    ... The ISA Info which I gathered from you before including all ISA ... So I had checked your ISA configuration at the beginning. ... suppose the firebox will show you a PPTP service to publish. ... Click Virtual Private Network connection, ...
    (microsoft.public.windows.server.sbs)
  • Re: SBS R2 ISA2004 Dark Arts
    ... ISA in SBS as intended or you'll get into trouble. ... I have to get the back firewall configuration to work with the ... network in the rules/policies. ...
    (microsoft.public.windows.server.sbs)