Re: Cal License Problem



Did you put the last CAL setup disk in the floppy drive (the last floppy you
installed originally)? Doing this should allow all CALs previously
installed to be re-installed.

Do you have the same NIC in the SBS as you did when the CALs were originally
installed? The setup floppy disk is tied to the internal NIC of the SBS
when they are installed.

Is your drive a USB floppy drive? We've seen this error with some USB
floppy drives.

You might want to call Microsoft (US 800-936-4900).

--
Merv Porter [SBS-MVP]
============================

"S" <s@xxxxx> wrote in message
news:%23uyce3tTHHA.4832@xxxxxxxxxxxxxxxxxxxxxxx
Hi

I had to reinstall my server.
When I tried to reinstall the cal's that Microsoft sent to me I"m getting
this error:


---------------------------

Microsoft Small Business Server Client Add Pack

---------------------------

This disk may be damaged, write protected, or an illegal copy. The write
protect tab must be in the writeable position. This error message will
occur if this is a copy and not the original disk. This disk cannot be
used on a LS-120 drive.

---------------------------

OK


Any idea?

Than'x
Shay



.



Relevant Pages

  • Re: Write 3.5" disk image in Windows
    ... pre-iMac floppy drives from Apple can spin in five speeds and those from ... hand the built-in disk port of a IIgs can only deal with 800 KB ... configured correctly to allow 115,200 baud transfers. ...
    (comp.sys.apple2)
  • Re: LDOS or XENIX wanted for the 16, 6000 (long)
    ... >> why you can use different sized disk. ... design of standard floppy drives that strongly biases them toward ... most floppy drives give is a binary signal indicating whether the head ... the FDC must keep track of head position by ...
    (comp.sys.tandy)
  • Re: Looking for older System discs (pre-7.5).
    ... The last Macs with a built in floppy drive ... OSX never had a floppy disk drive driver, ... PC's with floppy drives are very common. ... Disk images made from the ...
    (comp.sys.mac.system)
  • Re: FreeBSD 6 (or 7) on a HP DL140 G3 SATA
    ... or floppy drives, and the HP firmware updater download is rather weird, but once it was updated all was happiness. ... Then make an image of the disk and load it into your pxe server. ... Boot via PXE said floppy image, copy BIOS flash utils and firmware to ramdisk. ...
    (freebsd-current)
  • Re: Write 3.5" disk image in Windows
    ... pre-iMac floppy drives from Apple can spin in five speeds and those from ... hand the built-in disk port of a IIgs can only deal with 800 KB ...
    (comp.sys.apple2)

Loading