Re: OWA



'Thats good news at least about the firewall. I've logged on as the admin
vs. myself in the past and went into services. I'm looking at properties for
the www Publishing and wondering if it is a login issue here? Currently the
setup is to logon as local system account. Down below I have 2 hardware
profiles and each are enabled. Should this be setup for the administrator
account instead of local profile? Should i even be looking in here :) I
don't want to make any changes with out a second opinion.

Chris

"Cris Hanna [SBS-MVP]" wrote:

Thats correct
Its not a firewall issue, its a IIS issue, and quite possible a permission
problem


--
Cris Hanna [SBS-MVP]
Owner, Computing Possibilities
Belleville, IL
A Microsoft Partner
--------------------------------------------------------------
Sent using Windows Mail on Vista Ultimate Beta 2 joined to my SBS network
Please only respond in newsgroups to share with everyone
"Chris" <Chris@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:B546D244-DE0B-4A7B-9DEB-B94BCCDB46C0@xxxxxxxxxxxxxxxx
Thanks Chris

Tried them both earlier and same error message - 403. I noted that the
virtual server in my exchange manager control panel is turned off (red
X).
When I try to turn it on I'm directed to my IIS admin panel and then to
the
http section but I am unable to do anythere. I tried to creat a new
virtual
server but had no luck. Would this mean that it isn't a firewall issue
if I
get ths same error message in and outside of the LAN?

Chris

"Cris Hanna [SBS-MVP]" wrote:

> from inside the lan can you try:
> http://servername/exchange
> https://servername/exchange
>
>
> --
> Cris Hanna [SBS-MVP]
> Owner, Computing Possibilities
> Belleville, IL
> A Microsoft Partner
> --------------------------------------------------------------
> Sent using Windows Mail on Vista Ultimate Beta 2 joined to my SBS
network
> Please only respond in newsgroups to share with everyone
> "Chris" <Chris@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> news:6E0742CA-4586-4466-A1E0-6B6AF79785B6@xxxxxxxxxxxxxxxx
> Chris
> The original URL was to used outside of the lan but I found it would
> work
> from within as well.
>
> Chris
>
> "Cris Hanna [SBS-MVP]" wrote:
>
> > are you typing the full URL from within your LAN or are you trying
> this
> > from outside the lan?
> >
> > --
> > Cris Hanna [SBS-MVP]
> > Owner, Computing Possibilities
> > Belleville, IL
> > A Microsoft Partner
> > --------------------------------------------------------------
> > Sent using Windows Mail on Vista Ultimate Beta 2 joined to my SBS
> network
> > Please only respond in newsgroups to share with everyone
> > "Chris" <Chris@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> > news:C3054324-CE8C-4BBC-9085-50945624F066@xxxxxxxxxxxxxxxx
> >
> > Well the paper wasn't really much help. Particulary in how the
OWA
> is
> > set
> > up initially. I was able to get a better view of the error
message
> on
> > the
> > http address. It is #403 which is a permissions error. I
wonder if
> the
> > issue lies in my sonic wall pro200 fire wall.
> >
> > As a second idea what services need to be running for this to
work?
> >
> > I noted that in my In ternet Services my Basic Website was
turned
> off.
> > Tried to turn it on but it said the address was already in use.
The
> > address
> > was the IP of my server.
> >
> > Many thanks.
> >
> > Chris
> > "Chris" wrote:
> >
> > > Thank you, I have a fresh cup O' Jo and have downloaded the
white
> > paper.
> > >
> > > Chris
> > >
> > > "Cris Hanna [SBS-MVP]" wrote:
> > >
> > > > I would probably start here
> > > > http://support.microsoft.com/kb/326303/en-us
> > > >
> > > > --
> > > > Cris Hanna [SBS-MVP]
> > > > Owner, Computing Possibilities
> > > > Belleville, IL
> > > > A Microsoft Partner
> > >
--------------------------------------------------------------
> > > > Sent using Windows Mail on Vista Ultimate Beta 2 joined to
my
> SBS
> > network
> > > > Please only respond in newsgroups to share with everyone
> > > > "Chris" <Chris@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> > > > news:7B3ED289-6A78-4A2E-960F-B88797C6598A@xxxxxxxxxxxxxxxx
> > > > Hi - I'm still struggling with my web based e-mail. OWA
> right?
> > I'm
> > > > sbserver
> > > > 2000 with exchange server running on same box. When I
type in
> the
> > URL
> > > > (http??:mail.mydomain.com/exchange I get page not found.
This
> has
> > run
> > > > off
> > > > and on in the past so it is time to figure it out and fix
it.
> > I've done
> > > > a
> > > > lot of searches but here I am (again). Can somebody point
me
> to a
> > good
> > > > turorial on how it is setup and run? Perhaps I'm just
missing
> a
> > service
> > > > that
> > > > is turned off. Help as always is great.
> > > >
> >
>

.



Relevant Pages

  • Re: TSWEB Client
    ... "Chris" wrote in message ... > I have the tsweb client running on a win2k server that's ... > on the DMZ of my firewall. ... > remote client on the LAN from the LAN but unable to ...
    (microsoft.public.win2000.termserv.clients)
  • Re: XP Firewall(?) problem
    ... > The XP firewall should be there, ... > If you start blocking ports with a firewall inside your LAN... ... >> I used a floppy to attach client to domain, ... >> Chris Curtis ...
    (microsoft.public.backoffice.smallbiz2000)
  • Re: How save is a Windows PC on a Linux network.
    ... firewall between the dialup and the internal lan. ... Being of sound mind and body, I never surf with the Windows machine and ... Assuming you trust your firewall, and you know what's running on the ... I have to have it on the lan to access the Linux servers but sometimes it ...
    (comp.os.linux.misc)
  • Re: How to stealth against ping/echo requests?
    ... I just started using the Online-Armor firewall. ... Some ports are even open. ... Are you behind a router? ... Every time it founds a new LAN, it asks if you want to trust it ...
    (comp.security.firewalls)
  • Re: Wohin mit dem OpenVPN Server?
    ... Ich geb dem Server eine öffentliche IP und setze ihn in die DMZ, ... Adresse über die Firewall von der DMZ aus ins LAN verbinden... ... Ein kompromittierter VPN-Server ...
    (de.comp.security.firewall)