Re: Instant Messaging not working

Tech-Archive recommends: Fix windows errors by optimizing your registry

Tony Su-
We are having trouble using IM from LAN user to the SBS 2000 server. It is
the same IM (in MS exchange) that came with SBS 2000. The client software is
being distributed by the SBS 2000 server so I assume it is the correct
version. Where can I find the proxy information?

"Tony Su" wrote:

> Jeff (and Kevin),
>
> You have to start off with naming the IM application (and version) to
> identify what protocols are being used, then whether communications are from
> an Internet remote user to the SBServer, from a LAN User to the SBServer,
> crossing from the Internet to the LAN, LAN to the Internet, Internet to
> Internet but authenticating to a Server in the SBS network or something else.
>
> Believe it or not, every scenario I just mentioned may or may not be
> supported and requires different configuration depending on the app you use.
>
> Remember, if you're using Exchange2K IM, you must use the old Exchange IM
> Client, not the newer versions.
>
> Also, the error messages you're showing aren't normally associated with
> standard IM, are you trying to go across ISA using multimedia?
>
> Summary:
> LAT error usually relates to someone using a private address connecting to
> the SBServer from the Internet and your LAT contains more than just the
> specified address range your LAN is using.
>
> Streaming Media Filter - Should be enabled, verify it is. But, depending on
> what you did to trigger this error, maybe it's relevant and maybe not.
>
> Tony
>
>
>
> "Jeffery" wrote:
>
> > Yes I am. We are trying to log into the IM used for intraoffice users
> > connected to the sserver. When a user attempts to log in it gives a message
> > indicating the IM in unavailable - try again later. I posted the error
> > messages thinking that it may be related to the IM issue.
> > Jeff
> >
> > "Kevin Weilbacher [SBS-MVP]" wrote:
> >
> > > Jeff, are you trying to run IM from the server?
> > >
> > > --
> > > Kevin Weilbacher [SBS-MVP]
> > > "The days pass by so quickly now, the nights are seldom long"
> > >
> > >
> > > "Jeffery" <Jeffery@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> > > news:764E1208-E9D3-4E3A-8943-23D1CC27DBDB@xxxxxxxxxxxxxxxx
> > > > My instant messaenger is not working. I am getting the following messages
> > > > in
> > > > the ap[plication log:
> > > >
> > > > MS web proxy error:
> > > >
> > > > The ISA Server services cannot create a packet filter 64.124.109.201. This
> > > > event occurs when there is a conflict between the Local Address Table
> > > > (LAT)
> > > > configuration and the Windows 2000 routing table. Check the routing table
> > > > and
> > > > the LAT to find the source of the conflict.
> > > >
> > > > MS web proxy warning:
> > > >
> > > > ISA Server detected a proxy chain loop. There is a problem with the
> > > > configuration of the ISA Server routing policy.
> > > >
> > > > Isa server error:
> > > >
> > > > ISA Server Control Service discovered a missing application filter
> > > > component
> > > > (Streaming Media Filter) GUID {473ED0E1-6371-4ED2-9F95-A676B66659A2}. The
> > > > application filter cannot be found on this server. Check that the
> > > > specified
> > > > filter was installed. The error code in the Data area of the event
> > > > properties
> > > > indicates the cause of the failure.
> > > >
> > > > Would this have anything to do with it?
> > > >
> > > > Thanks
> > > > jeff G
> > >
> > >
> > >
.

Relevant Pages

  • RE: Help with Internet and Email wizard
    ... Thank you for posting in the SBS newsgroup. ... On SBS Server, run the CEICW, go through "Connection Type" page, on ... Since we don't want to set up an external internet access, ... We can select Option one "Create a new Web server certificate" to ...
    (microsoft.public.windows.server.sbs)
  • Re: Urgent! New router and big disaster
    ... Set the 'external' interface of SBS to get it's IP via DHCP from the router ... If the ws does not get an IP from DHCP check the event log on the server, ... They can go one day with out internet, ...
    (microsoft.public.windows.server.sbs)
  • Re: ICMP error when trying to access OWA on SBS 2003 Premium
    ... The Default Web Site is set to listen on the internal IP of the SBS server ... OWA publish rule or IIS manually. ... entire Web site from the Internet" is selected. ...
    (microsoft.public.windows.server.sbs)
  • Re: SBS 2003 IIS BASED SERVICES FAIL INTERMITTENTLY
    ... If I read your post correctly, you have a switch where the SBS ... Run DHCP server on your SBS, and set all client machine nics to dynamic. ... Once you have your nics configured, run the Connect to the Internet wizard, ... QUESTION1 - what is REFUSING CONNECTIONS? ...
    (microsoft.public.windows.server.sbs)
  • RE: Firewall Rule Set not allowing access to DNS servers?
    ... > My LAN is configured with static IP addresses, ... > I have full connectivity with the internet from every machine on my ... > # Allow out access to my ISP's Domain name server. ... > # Interrogate packets originating from the public internet ...
    (freebsd-questions)