Re: Help! Mirror boots only from floppy

From: Merv Porter [SBS-MVP] (mwport_at_no_spam_hotmail.com)
Date: 01/24/05


Date: Mon, 24 Jan 2005 13:31:14 -0500

IIRC, I had a Dell PE 2300 a while back that wouldn't boot to shadow drive
unless I removed original Drive 0 and put the shadow drive in its place. I
think it had something to do with the SCSI backplane in the server.

-- 
Merv  Porter  [SBS MVP]
===================================
"TakeFlight" <noway@dot.com> wrote in message
news:OG9Jd.2548$HZ.915@okepread07...
> SCSI drive.  Unplugged the power to the original drive, so this one's the
> only one active.  Tried fiddling with the jumper but it doesn't seem to
> matter.
>
> "Merv Porter [SBS-MVP]" <mwport@no_spam_hotmail.com> wrote in message
> news:%239sBHIcAFHA.3988@TK2MSFTNGP11.phx.gbl...
> > SCSI or IDE?  If SCSI, did you reset the jumper on the new drive to SCSI
> 0?
> >
> > -- 
> > Merv  Porter  [SBS MVP]
> > ===================================
> >
> > "TakeFlight" <noway@dot.com> wrote in message
> > news:mLYId.2177$HZ.1460@okepread07...
> > > Did that.  Still no dice.
> > >
> > > "Merv Porter [SBS-MVP]" <mwport@no_spam_hotmail.com> wrote in message
> > > news:uTKGSEQAFHA.3236@TK2MSFTNGP15.phx.gbl...
> > > > MBR not written to shadow disk unless you first create a small
> partition
> > > on
> > > > it, format it NTFS and then delete it.
> > > >
> > > > Why can't I use the other disk of the mirror set to boot Windows NT
> > > > http://www.windowsitpro.com/Article/ArticleID/14673/14673.html
> > > >
> > > > -- 
> > > > Merv  Porter  [SBS MVP]
> > > > ===================================
> > > > "TakeFlight" <noway@dot.com> wrote in message
> > > > news:rAEId.1761$HZ.134@okepread07...
> > > > > Trying to move a functioning SBS 2000 onto a new (larger) hard
> drive.
> > > No
> > > > > problem, right?  Just insert the new drive and build a mirror from
> > Disk
> > > > > Manager.  Then power down, remove the power cable from the
original
> > > drive
> > > > > and power up.  No boot.
> > > > >
> > > > > If I copy the boot files onto a floppy, the drive boots fine.
I've
> > > > verified
> > > > > that the files are indeed present on the hard drive, and the
> floppy's
> > > > > boot.ini actually works unaltered.
> > > > >
> > > > > What am I missing?  If it boots from the floppy, boot.ini
unaltered,
> > it
> > > > > should be something wrong with the MBR, no?
> > > > >
> > > > > (unusual side note: booting from CD into the Recovery Console
shows
> > > winnt
> > > > as
> > > > > being drive "F" instead of "C" like I would have thought.  Running
> > > fixboot
> > > > > and fixmbr has no effect.  Booting into Windows from the floppy
and
> > > > looking
> > > > > at Disk Mgr shows "C" and "E" like they should be, and reports no
> > > > problems.)
> > > > >
> > > > > Thanks for any insight...this problem is getting old fast.
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>


Relevant Pages

  • Re: Help! Mirror boots only from floppy
    ... If SCSI, did you reset the jumper on the new drive to SCSI 0? ... >> Why can't I use the other disk of the mirror set to boot Windows NT ... >> Merv Porter [SBS MVP] ...
    (microsoft.public.backoffice.smallbiz2000)
  • Re: IBM 9Gb SCSI disk
    ... > this drive to live on scsi id:2 however I'm not sure how to set it. ... You may want to jumper position 5, to auto-spin the drive at power-on, ... since you've only 3 drives, ...
    (comp.sys.ibm.ps2.hardware)
  • Re: VLC & SCSI Drive Help Needed
    ... > On the RZ24L-E, there are jumpers (in addition the SCSI ID) labeled SS ... assuming the EP jumper on the RZ24L-E is for Enable ... >>VLC User wrote: ...
    (comp.os.vms)
  • RE: Problems with SCSI
    ... As for the additional messages that is to be sure you see output from the hardware tests which should list the SCSI controller and any devices connected to the controller, ... If changing the jumper, or pulling out any PCI cards in the slots mentioned in the manual with that jumper, you have me stumped. ... any SCSI drives, although I don't think it showed my ... lists my SATA drive, not the SCSI drive. ...
    (freebsd-questions)
  • SCSI IDs in Fuel question
    ... if there are two harddisks built into a SGI Fuel, ... with their jumper settings for SCSI addresses 0/1 ...
    (comp.sys.sgi.hardware)