Re: Connector for POP3 Mailboxes will not receive mail
From: Merv Porter [SBS-MVP] (mwport_at_no_spam_hotmail.com)
Date: 11/13/04
- Next message: Kevin Weilbacher [SBS-MVP]: "Song of the Week - Nov 13, 2004"
- Previous message: Lanwench [MVP - Exchange]: "Re: Setting up two ISPs on one SBS 2000"
- In reply to: Michael Faklis: "Re: Connector for POP3 Mailboxes will not receive mail"
- Next in thread: Michael Faklis: "Re: Connector for POP3 Mailboxes will not receive mail"
- Reply: Michael Faklis: "Re: Connector for POP3 Mailboxes will not receive mail"
- Messages sorted by: [ date ] [ thread ]
Date: Sat, 13 Nov 2004 14:50:56 -0500
Your going to need a packet filter in ISA to allow outbound traffic on port
110. Since you haven't (won't) run ICW, you can create it manually. The
name for it when created by ICW is: "BackOffice POP3 110 Out CustomFilter".
You can use that name. Here's the procedure... (see Chad's post directly
above Wallace's)
You may want to reboot the server after you create the filter.
Not sure why MS PSS told you not to run ICW again. What they may have meant
was that, if you run ICW and allow ISA firewall to be reconfigured, it will
disable any "custom" packet filters you've created in the past. You would
then have to manually go in and re-enable them (no big deal, just open them
and put a checkmark in "Enable").
-- Merv Porter [SBS MVP] =================================== "Michael Faklis" <Michael_Faklis@EvolSwSys.net> wrote in message news:4YSdnWsA7_pRtgvcRVn-qQ@megapath.net... > I have not rerun ICW again, because in a Microsoft service call earlier this > year on another matter, I was told not to run it again. > > I didn't bounce the Exchange Attendant Service, since I did reboot the > server. > > The built-in POP3 ISA filter "BackOfficePop3PredefinedType" is enabled. > > I thought I had POP3 access to remote machines, since my Outlook client can > access the POP3 from my workstation that sits behind the ISA residing on my > server. The article you referred me to refers to > http://support.microsoft.com/default.aspx?scid=kb;en-us;165186 XFOR: > Verifying Basic POP3 Connectivity Using Telnet. I tried that from my > workstation, and was able to access that POP3, however when I tried it from > my server, it failed "Connecting To pop3domain...Could not open connection > to the host, on port 110: Connect failed". > > So, I can POP3 to a remote server from a workstation on my SBS network, but > not from the SBS server itself. How do I correct that problem? > > > "Merv Porter [SBS-MVP]" <mwport@no_spam_hotmail.com> wrote in message > news:eBmRhsXyEHA.2316@TK2MSFTNGP15.phx.gbl... > > Have you re-run ICW and let it set up ISA again? > > Have you stopped/started the Exchange Attendant Service? > > Have you rebooted the server? > > > > Make sure the POP3 ISA filter is enabled > > > http://groups.google.com/groups?hl=en&lr=&threadm=lk6ievgaoc3q57o2h178spg60hb88l8h7f%404ax.com&rnum=2&prev=/groups%3Fhl%3Den%26lr%3D%26q%3D12050%2B12052 > > > > -- > > Merv Porter [SBS MVP] > > =================================== > > "Michael Faklis" <Michael_Faklis@EvolSwSys.net> wrote in message > > news:-bqdnds7b6qg5AjcRVn-ow@megapath.net... > > > I have a SBS 2000 server, which receives mail correctly sent to my > domain. > > > I have a new POP3 account on someone else's machine, which I want to > come > > > into my Exchange 2000, so I configured the (until now dormant) Connector > > for > > > POP3 Mailboxes. > > > > > > I opened the Connector for POP3 Mailboxes properties, and went to the > User > > > Mailboxes tab. I entered a new entry with the account name, mail > server, > > > password, and authenication method (basic) that works when downloading > > that > > > mailbox using my Outlook 2003 client. I specified the Exchange User to > > > received the mail. > > > > > > When the Connector for POP3 Mailboxes attempts to retrieve mail from > that > > > POP3 account, it fails leaving a couple messages in the Application > Event > > > Log: > > > Event 12052, POP3: An error occured during a POP3 transaction to host > > <pop3 > > > hostname [pop3 ip address]>. For user <pop3 user>. The error is 10065 > > > Event 12050, POP3 Failed to check the POP3 account for pop3user at host > > > pop3host on port 110. Ther error is 10065 > > > > > > I have verified and reentered the account information, and that same > > > infomation still works when downloading the messages using Outlook. For > > > some reason I cannot diagnose, the Exchange Connector for POP3 Mailboxes > > > cannot download from my remote POP3 mailbox. > > > > > > I have searched the knowledgebase and verified that I had the latest > > service > > > packs installed. > > > > > > Can anyone advise me on this problem? > > > > > > -Michael Faklis MFaklis@ACM.org > > > > > > > > > > > >
- Next message: Kevin Weilbacher [SBS-MVP]: "Song of the Week - Nov 13, 2004"
- Previous message: Lanwench [MVP - Exchange]: "Re: Setting up two ISPs on one SBS 2000"
- In reply to: Michael Faklis: "Re: Connector for POP3 Mailboxes will not receive mail"
- Next in thread: Michael Faklis: "Re: Connector for POP3 Mailboxes will not receive mail"
- Reply: Michael Faklis: "Re: Connector for POP3 Mailboxes will not receive mail"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
