Re: SBS2000, ISA server, FTP does not work on clients
From: Marina Roos [SBS-MVP] (marina_at_roos.nodontwantspam.nl.com)
Date: 06/02/04
- Next message: Jim Behning: "Re: cant run icw as sbs2k sees 2 nics when only on exists"
- Previous message: DarrenD: "Re: SBS2000, ISA server, FTP does not work on clients"
- In reply to: DarrenD: "Re: SBS2000, ISA server, FTP does not work on clients"
- Next in thread: DarrenD: "Re: SBS2000, ISA server, FTP does not work on clients"
- Reply: DarrenD: "Re: SBS2000, ISA server, FTP does not work on clients"
- Messages sorted by: [ date ] [ thread ]
Date: Wed, 02 Jun 2004 12:20:46 GMT
Hi Darren,
Hmm, I don't really know if you should disable packet filtering. I mean, you
could try to see if there is the culprit. It could also be your router
maybe?
-- Regards, Marina Microsoft SBS-MVP "DarrenD" <anonymous@discussions.microsoft.com> schreef in bericht news:1729201c4489a$ad75d2c0$a001280a@phx.gbl... I'm going to try disabling packet filtering on the ISA server. Our network as I said, is connected to the internet via Broadband. There is a NAT enabled router between the second NIC on the server and the broadband modem. Do you think it would be ok to run with the packet filtering disabled as a full time solution (if this gets ftp of the clients working of course) as the 'firewall' will then be the NAT router? Thanks for your help so far, its greatly appreciated!! - Darren >-----Original Message----- >If the Firewall client is installed on the workstations and pointing to your >server (and autoconfiguration is turned off), and if proxy settings in IE, >tab Connections, Lan settings, is pointing to your server and port 8080 on >the workstations, you might want to check the Advanced tab of IE, and make >sure that http 1.1 over proxy is enabled. There would be no need to change >the default ISA settings as far as I know. > >-- >Regards, > >Marina >Microsoft SBS-MVP > >"darrend" <anonymous@discussions.microsoft.com> schreef in bericht >news:167f101c447de$f1df94d0$a001280a@phx.gbl... > >The server does not have the firewall client installed, >but does it use the ISA settings? >The server needs to use ftp as it FTP's the antivirus >update files and downloads them to the network. This >works ok. >The clients (well 4 or 5 of them) need access to a >particular ftp site to sned and receive files from their >customers, but they cannot log onto any ftp server. Is >there some setting in ISA I can chabnge to allow the >clients to use FTP services? > > > >>-----Original Message----- >>Hi Darren, >> >>As the server hasn't got the firewall client installed >(and shouldn't!), it >>works a bit different from the server. >>Question: why do you need ftp access from the server? >>I never had to make changes to the ISA config to be able >to ftp from the >>clients. So can you ftp from the clients or not? >> >>-- >>Regards, >> >>Marina >>Microsoft SBS-MVP >> >>"darrend" <anonymous@discussions.microsoft.com> schreef >in bericht >>news:160fb01c447d0$5d019150$a601280a@phx.gbl... >>Hi Marina, >> >>Thank you for your input. >>Yes, the firewall client is installed and configured in >>the default way to the ISA server (SBS2000 server) on all >>clients. >>Its a pretty standard setup, broadband internet >>connection to router, connected to second NIC, LAN >>connected to first NIC. >>As I've said, the internet works fine on the clients. >>I just don't get how I can FTP fine using the server. If >>I use the Internet connection wizard and uncheck ftp in >>the packet filtering section when it sets up ISA, I can >>no longer gain access to FTP sites from the server. >>Does the server NOT use the same ISA config that the >>clients use?? >> >>- Darren >> >> >>>-----Original Message----- >>>Hi Darren, >>> >>>Just to make sure, you have installed the firewall >>client on the >>>workstations right? >>> >>>-- >>>Regards, >>> >>>Marina >>>Microsoft SBS-MVP >>> >>>"darrend" <anonymous@discussions.microsoft.com> schreef >>in bericht >>>news:1666b01c447c1$a732efd0$a001280a@phx.gbl... >>> >>>>In the Internet Options check 'Use passive FTP' >>>> >>>> >>>>-- >>>>Mariėtte Knap - MVP >>>>http://www.smallbizserver.net >>>> >>>> >>>>. >>>> >>> >>>Mariette, >>> >>>I have tried you suggestion but I still cannot connect >to >>>an ftp site either via the browser (page cannot be >>>displayed) or from the command line (cannot connect). >I'm >>>finding it hard to understand why it should work like a >>>dream from the server but not any of the clients. Surely >>>they are using the same settings in the ISA software?? >>>Note: the clients do not have any third party 'firewall' >>>type software running. >>> >>>Can anyone shed any light on this? >>> >>>- Darren >>> >>> >>> >>>. >>> >> >> >>. >> > > >. >
- Next message: Jim Behning: "Re: cant run icw as sbs2k sees 2 nics when only on exists"
- Previous message: DarrenD: "Re: SBS2000, ISA server, FTP does not work on clients"
- In reply to: DarrenD: "Re: SBS2000, ISA server, FTP does not work on clients"
- Next in thread: DarrenD: "Re: SBS2000, ISA server, FTP does not work on clients"
- Reply: DarrenD: "Re: SBS2000, ISA server, FTP does not work on clients"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
