Re: ICW - An error occured while configuring a component

From: Marina Roos [SBS-MVP] (marina_at_roos.nodontwantspam.nl.com)
Date: 05/22/04


Date: Sat, 22 May 2004 02:02:43 +0200

Hi Jason,

This is a tough one. Are there any errors in the eventlogs?
 I've googled the errors you have, and one suggestion was to reinstall the
Administration Tools with the sbs-setup and then run CEICW-wizard again.

-- 
Regards,
Marina
Microsoft SBS-MVP
"Jason" <jasonshaw.nospam@ntlworld.com> schreef in bericht
news:1085153656.27456.0@iris.uk.clara.net...
> Marina,
>
> I have changed the NIC settings as you have suggested and re-run ICW but
the
> icwlog is still showing the same errors, are there any other logs I could
> look at which may shed some light on what is happening?
>
> Many thanks,
> Jason
>
> "Marina Roos [SBS-MVP]" <marina@roos.nodontwantspam.nl.com> wrote in
message
> news:cYorc.2210$%4.48625@typhoon.bart.nl...
> > DNS on your external nic should only point to your server-IP. The
external
> > nic should only have TCP/IP bound to it. On the advanced properties of
> > TCP/IP, tab WINS, delete the address and make sure that Netbios over
> TCP/IP
> > is disabled.
> >
> > --
> > Regards,
> >
> > Marina
> > Microsoft SBS-MVP
> >
> > "Jason" <jasonshaw.nospam@ntlworld.com> schreef in bericht
> > news:1085149210.23021.0@iris.uk.clara.net...
> > > Here it is:
> > >
> > > Microsoft Windows [Version 5.2.3790]
> > > (C) Copyright 1985-2003 Microsoft Corp.
> > >
> > > Z:\>ipconfig/all
> > >
> > > Windows IP Configuration
> > >
> > >    Host Name . . . . . . . . . . . . : kentserver
> > >    Primary Dns Suffix  . . . . . . . : visionsecurity.local
> > >    Node Type . . . . . . . . . . . . : Unknown
> > >    IP Routing Enabled. . . . . . . . : Yes
> > >    WINS Proxy Enabled. . . . . . . . : Yes
> > >    DNS Suffix Search List. . . . . . : visionsecurity.local
> > >
> > > Ethernet adapter LAN Network Connection:
> > >
> > >    Connection-specific DNS Suffix  . :
> > >    Description . . . . . . . . . . . : Intel 8255x-based PCI Ethernet
> > > Adapter (10/100) #2
> > >    Physical Address. . . . . . . . . : 00-B0-D0-D0-1C-6E
> > >    DHCP Enabled. . . . . . . . . . . : No
> > >    IP Address. . . . . . . . . . . . : 192.168.0.100
> > >    Subnet Mask . . . . . . . . . . . : 255.255.255.0
> > >    Default Gateway . . . . . . . . . :
> > >    DNS Servers . . . . . . . . . . . : 192.168.0.100
> > >    Primary WINS Server . . . . . . . : 192.168.0.100
> > >
> > > PPP adapter RAS Server (Dial In) Interface:
> > >
> > >    Connection-specific DNS Suffix  . :
> > >    Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
> > >    Physical Address. . . . . . . . . : 00-53-45-00-00-00
> > >    DHCP Enabled. . . . . . . . . . . : No
> > >    IP Address. . . . . . . . . . . . : 192.168.0.20
> > >    Subnet Mask . . . . . . . . . . . : 255.255.255.255
> > >    Default Gateway . . . . . . . . . :
> > >    NetBIOS over Tcpip. . . . . . . . : Disabled
> > >
> > > Ethernet adapter WAN Network Connection:
> > >
> > >    Connection-specific DNS Suffix  . :
> > >    Description . . . . . . . . . . . : NETGEAR FA311 Fast Ethernet PCI
> > > Adapter
> > >    Physical Address. . . . . . . . . : 00-02-E3-03-8B-FD
> > >    DHCP Enabled. . . . . . . . . . . : No
> > >    IP Address. . . . . . . . . . . . : 217.158.108.30
> > >    Subnet Mask . . . . . . . . . . . : 255.255.255.240
> > >    Default Gateway . . . . . . . . . : 217.158.108.17
> > >    DNS Servers . . . . . . . . . . . : 195.8.69.7
> > >                                        195.8.69.12
> > >    Primary WINS Server . . . . . . . : 192.168.0.100
> > >    NetBIOS over Tcpip. . . . . . . . : Disabled
> > >
> > > Z:\>
> > >
> > > Many thanks,
> > > Jason
> > >
> > >
> > >
> > > "Marina Roos [SBS-MVP]" <marina@roos.nodontwantspam.nl.com> wrote in
> > message
> > > news:u9XZ63zPEHA.2348@TK2MSFTNGP10.phx.gbl...
> > > > Hi Jason,
> > > >
> > > > Can you post the ipconfig/all from the server please?
> > > >
> > > > --
> > > > Regards,
> > > >
> > > > Marina
> > > > Microsoft SBS-MVP
> > > >
> > > > "Jason" <jasonshaw.nospam@ntlworld.com> schreef in bericht
> > > > news:1085148161.22674.0@iris.uk.clara.net...
> > > > > I have upgraded a SBS2000 install to SBS2003 which, after a few
> > > problems,
> > > > > seemed to work ok.
> > > > >
> > > > > I have run ICW to alter the network settings and firewall settings
> and
> > > > keep
> > > > > getting "An error occured while configuring a component" errors.
> > > > >
> > > > > Here is a section from the icwlog:
> > > > >
> > > > > Call to Fixing the TCP/IP NIC Binding order () returned ok.
> > > > > Dhcp server is installed and not disabled
> > > > > Call to Set DHCP Server to start up automatically () returned ok.
> > > > > DNS server is installed and not disabled
> > > > > Call to Changing startup type for DNS () returned ok.
> > > > > Call to Clearing DNS server entries on the LAN NIC () returned ok.
> > > > > Call to Setting DNS server IP for the LAN NIC () returned ok.
> > > > > Call to Resetting DNS recursion timeout () returned ok.
> > > > > Error 0x80070003 returned from call to Resetting client dns query
> > > timouts
> > > > in
> > > > > config.dat().
> > > > > Error 0x80070003 returned from call to CNetCommit::Common().
> > > > > Error 0x80070003 returned from call to CNetCommit::Commit().
> > > > >
> > > > > And another:
> > > > >
> > > > > Call to Notify RUP for Companyweb () returned ok.
> > > > > Call to Restricting exhchangeoma to local server only () returned
> ok.
> > > > > Error 0x80070003 returned from call to Restricting ConnectComputer
> to
> > > > local
> > > > > network only().
> > > > > Call to Setting PassOPTIONSToPublishedServer () returned ok.
> > > > > Call to GetInternetServerName () returned ok.
> > > > > Error 0x80070003 returned from call to NotifyProvisioning().
> > > > > Error 0x80070003 returned from call to Committing Web publishing
> > > rules().
> > > > > Error 0x80070003 returned from call to CCometCommit::Commit().
> > > > > Calling CCertCommit::CommitEx
> > > > > Calling CCertCommit::ValidatePropertyBag
> > > > > Require SSL for OWA: 1
> > > > >
> > > > > We are using a server with two nics, isa server and a broadband
> > router.
> > > We
> > > > > would like to use OMA and OWA via HTTPS.
> > > > >
> > > > > Has anybody come accross these errors and fixed them?
> > > > >
> > > > > Many thanks,
> > > > > Jason
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>


Relevant Pages

  • Re: is Zone allam locking up?
    ... > Is the cable modem connected to the PC using usb? ... Thanks Jason Edwards. ... Can you enlarge on your suggestion I give my ... I use an ethernet via telewest's cable modem.which has a hardware fire wall ...
    (comp.security.firewalls)
  • Re: Born to Herf 3 anyone?
    ... Jason is being his usual modest, polite and politically correct self. ... The guy who collects the autographed Cigar Aficionado magazine covers. ... And because of his suggestion, I'm now in the planning process and trying to get in touch with the woman at the track today. ...
    (alt.smokers.cigars)
  • Re: Born to Herf 3 anyone?
    ... Jason is being his usual modest, ... The guy who collects the autographed Cigar Aficionado magazine ... And because of his suggestion, ... or the State Championship for another circuit....the ...
    (alt.smokers.cigars)
  • Re: is Zone allam locking up?
    ... "MikeS" wrote in message ... Can you enlarge on your suggestion I give my ... In the start menu choose Run and type cmd ... > Thanks Jason and ABC. ...
    (comp.security.firewalls)
  • Re: Born to Herf 3 anyone?
    ... Jason is being his usual modest, polite and politically correct self. ... The guy who collects the autographed Cigar Aficionado magazine ... And because of his suggestion, ...
    (alt.smokers.cigars)