Re: ICW - An error occured while configuring a component

From: Jason (jasonshaw.nospam_at_ntlworld.com)
Date: 05/21/04 

Date: Fri, 21 May 2004 16:31:45 +0100

Marina,

I have changed the NIC settings as you have suggested and re-run ICW but the
icwlog is still showing the same errors, are there any other logs I could
look at which may shed some light on what is happening?

Many thanks,
Jason

"Marina Roos [SBS-MVP]" <marina@roos.nodontwantspam.nl.com> wrote in message
news:cYorc.2210$%4.48625@typhoon.bart.nl...
> DNS on your external nic should only point to your server-IP. The external
> nic should only have TCP/IP bound to it. On the advanced properties of
> TCP/IP, tab WINS, delete the address and make sure that Netbios over
TCP/IP
> is disabled.
>
> --
> Regards,
>
> Marina
> Microsoft SBS-MVP
>
> "Jason" <jasonshaw.nospam@ntlworld.com> schreef in bericht
> news:1085149210.23021.0@iris.uk.clara.net...
> > Here it is:
> >
> > Microsoft Windows [Version 5.2.3790]
> > (C) Copyright 1985-2003 Microsoft Corp.
> >
> > Z:\>ipconfig/all
> >
> > Windows IP Configuration
> >
> > Host Name . . . . . . . . . . . . : kentserver
> > Primary Dns Suffix . . . . . . . : visionsecurity.local
> > Node Type . . . . . . . . . . . . : Unknown
> > IP Routing Enabled. . . . . . . . : Yes
> > WINS Proxy Enabled. . . . . . . . : Yes
> > DNS Suffix Search List. . . . . . : visionsecurity.local
> >
> > Ethernet adapter LAN Network Connection:
> >
> > Connection-specific DNS Suffix . :
> > Description . . . . . . . . . . . : Intel 8255x-based PCI Ethernet
> > Adapter (10/100) #2
> > Physical Address. . . . . . . . . : 00-B0-D0-D0-1C-6E
> > DHCP Enabled. . . . . . . . . . . : No
> > IP Address. . . . . . . . . . . . : 192.168.0.100
> > Subnet Mask . . . . . . . . . . . : 255.255.255.0
> > Default Gateway . . . . . . . . . :
> > DNS Servers . . . . . . . . . . . : 192.168.0.100
> > Primary WINS Server . . . . . . . : 192.168.0.100
> >
> > PPP adapter RAS Server (Dial In) Interface:
> >
> > Connection-specific DNS Suffix . :
> > Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
> > Physical Address. . . . . . . . . : 00-53-45-00-00-00
> > DHCP Enabled. . . . . . . . . . . : No
> > IP Address. . . . . . . . . . . . : 192.168.0.20
> > Subnet Mask . . . . . . . . . . . : 255.255.255.255
> > Default Gateway . . . . . . . . . :
> > NetBIOS over Tcpip. . . . . . . . : Disabled
> >
> > Ethernet adapter WAN Network Connection:
> >
> > Connection-specific DNS Suffix . :
> > Description . . . . . . . . . . . : NETGEAR FA311 Fast Ethernet PCI
> > Adapter
> > Physical Address. . . . . . . . . : 00-02-E3-03-8B-FD
> > DHCP Enabled. . . . . . . . . . . : No
> > IP Address. . . . . . . . . . . . : 217.158.108.30
> > Subnet Mask . . . . . . . . . . . : 255.255.255.240
> > Default Gateway . . . . . . . . . : 217.158.108.17
> > DNS Servers . . . . . . . . . . . : 195.8.69.7
> > 195.8.69.12
> > Primary WINS Server . . . . . . . : 192.168.0.100
> > NetBIOS over Tcpip. . . . . . . . : Disabled
> >
> > Z:\>
> >
> > Many thanks,
> > Jason
> >
> >
> >
> > "Marina Roos [SBS-MVP]" <marina@roos.nodontwantspam.nl.com> wrote in
> message
> > news:u9XZ63zPEHA.2348@TK2MSFTNGP10.phx.gbl...
> > > Hi Jason,
> > >
> > > Can you post the ipconfig/all from the server please?
> > >
> > > --
> > > Regards,
> > >
> > > Marina
> > > Microsoft SBS-MVP
> > >
> > > "Jason" <jasonshaw.nospam@ntlworld.com> schreef in bericht
> > > news:1085148161.22674.0@iris.uk.clara.net...
> > > > I have upgraded a SBS2000 install to SBS2003 which, after a few
> > problems,
> > > > seemed to work ok.
> > > >
> > > > I have run ICW to alter the network settings and firewall settings
and
> > > keep
> > > > getting "An error occured while configuring a component" errors.
> > > >
> > > > Here is a section from the icwlog:
> > > >
> > > > Call to Fixing the TCP/IP NIC Binding order () returned ok.
> > > > Dhcp server is installed and not disabled
> > > > Call to Set DHCP Server to start up automatically () returned ok.
> > > > DNS server is installed and not disabled
> > > > Call to Changing startup type for DNS () returned ok.
> > > > Call to Clearing DNS server entries on the LAN NIC () returned ok.
> > > > Call to Setting DNS server IP for the LAN NIC () returned ok.
> > > > Call to Resetting DNS recursion timeout () returned ok.
> > > > Error 0x80070003 returned from call to Resetting client dns query
> > timouts
> > > in
> > > > config.dat().
> > > > Error 0x80070003 returned from call to CNetCommit::Common().
> > > > Error 0x80070003 returned from call to CNetCommit::Commit().
> > > >
> > > > And another:
> > > >
> > > > Call to Notify RUP for Companyweb () returned ok.
> > > > Call to Restricting exhchangeoma to local server only () returned
ok.
> > > > Error 0x80070003 returned from call to Restricting ConnectComputer
to
> > > local
> > > > network only().
> > > > Call to Setting PassOPTIONSToPublishedServer () returned ok.
> > > > Call to GetInternetServerName () returned ok.
> > > > Error 0x80070003 returned from call to NotifyProvisioning().
> > > > Error 0x80070003 returned from call to Committing Web publishing
> > rules().
> > > > Error 0x80070003 returned from call to CCometCommit::Commit().
> > > > Calling CCertCommit::CommitEx
> > > > Calling CCertCommit::ValidatePropertyBag
> > > > Require SSL for OWA: 1
> > > >
> > > > We are using a server with two nics, isa server and a broadband
> router.
> > We
> > > > would like to use OMA and OWA via HTTPS.
> > > >
> > > > Has anybody come accross these errors and fixed them?
> > > >
> > > > Many thanks,
> > > > Jason
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>