Re: Help! RAS and 2 NICs?

From: Marina Roos [SBS-MVP] (marina_at_roos.nodontwantspam.nl.com)
Date: 03/04/04 

Date: Thu, 04 Mar 2004 00:14:36 GMT

This is never going to work. Why are you using public IP's on your nics?
Better get the to the private ranges. Use static IP's on the nics.
Internal nic should be something like:
IP: 192.168.16.2
GW blank
DNS 192.168.16.2

External:
IP: 10.0.0.2
GW 10.0.0.3
DNS 192.168.16.2 

--
Regards,
Marina
Microsoft SBS-MVP
"Tyler" <anonymous@discussions.microsoft.com> schreef in bericht
news:654c01c40150$00f84aa0$a501280a@phx.gbl...
> Here it is I am not using copy & paste, so I am just going
> to type the IP info..
>
> LAN card
>
> Physical Add: 00-04-5a-58-e8-89
> DHCP Enabled: No
> IP Address: 67.40.86.106 (My static IP)
> SubnetMask: 255.255.255.248
> IP Address: 209.180.158.1
> SubnetMask: 255.255.255.0
> Gateway: 67.40.86.110
> DNS and WINs are 209.180.158.1
>
> Net Card
>
> Physical Address: 00-04-5a-7e-9b-a6
> DHCP Enabled: No
> IP Address: 67.40.86.105
> SubnetMask: 255.255.255.248
> GateWay: 67.40.86.110
> No DNS and No WINs
>
> Now my LAN Card is usually not setup with a Static IP
> because it doesnt use the outside IPs.. Right now it is so
> I can have an outside connection.. This is how my cards
> have been and then after I ran the RAS setup for a VPN
> connection it seems like the two cards have stopped
> communicating.. I reran the Connection MAnager so that I
> can specify the inside card and the outside card.. I
> recreated my LAT tables with the inside IPs.. I dont know
> what is going on.. I am not sure how the outside
> connection stopped working from before the RAS setup to
> after the RAS Setup.. I didnt change any of the settings I
> just ran it for an outside VPN connection.. I am not sure
> where to go next.. My statics start with the 67 and my
> internals start with the 209.
>
>
> >-----Original Message-----
> >Can you post the ipconfig/all please?
> >
> >--
> >Regards,
> >
> >Marina
> >Microsoft SBS-MVP
> >
> >"Tyler" <anonymous@discussions.microsoft.com> schreef in
> bericht
> >news:62ae01c4012a$578ab9a0$a501280a@phx.gbl...
> >> I have an SBS setup with 2 NICS.. Everything working
> just
> >> fine.. Now I needed to setup RAS and after I set this
> up,
> >> my outside connection is gone.. I cannot get outside my
> >> network after I setup RAS, My network configuration and
> IP
> >> addresses are the same, I run the Network management
> tool
> >> to specify the inside network and outside network NICS,
> >> Everything works just fine except that it seems like the
> >> inside NIC and the outside NIC dont communicate
> anymore..
> >> Now if I setup my outside line ips to double up with the
> >> internal NIC I have outside connection.. Can anyone help
> >> me out? Where to start? I have been working on this for
> a
> >> full day now and I am stumped.. I disable my outside NIC
> >> becuase it isnt communicating to my inside NIC. I have a
> >> stack of 5 static IPs and if I setup the internal NIC
> with
> >> a 2nd IP (a static) and the static gateway, I have
> >> internet connection.. If I enable the outside NIC and
> take
> >> my static IPs out of the internal NIC (so it actually
> uses
> >> the outside NIC for the outside connection) I lose
> >> internet connect.. The only thing I havent done is
> remove
> >> the outside NIC from my hardware settings for it to
> >> reload.. I really dont know why I would have to do that
> >> since everything was working just fine until I ran the
> RAS
> >> setup wizard.. Does anyone have any ideas?
> >
> >
> >.
> >

Relevant Pages

  • Re: External Firewall with SBS 2003
    ... The pfSense device is running version 1.2 and it has 5 NICs. ... We'll certainly terminate the VPN connections at the pfSense and not SBS as it is now. ... 2004 and twin NICs for my setup. ... the Firewall do the PPTP connection. ...
    (microsoft.public.windows.server.sbs)
  • Re: Help! RAS and 2 NICs?
    ... Net Card ... Now my LAN Card is usually not setup with a Static IP ... I can have an outside connection.. ... >> to specify the inside network and outside network NICS, ...
    (microsoft.public.backoffice.smallbiz2000)
  • Re: Help! RAS and 2 NICs?
    ... By running your internal network in the IP space controlled by: ... > I can have an outside connection.. ... > have been and then after I ran the RAS setup for a VPN ... >>> to specify the inside network and outside network NICS, ...
    (microsoft.public.backoffice.smallbiz2000)
  • Re: Trying to configure a network on w2k3
    ... > to do is configure a small network for file ... > and print sharing, as well as ADSL internet connection, ... ADSL to one of those NICs, ... setup such a NIC with an IP address of ...
    (microsoft.public.windows.server.networking)
  • Re: how to setup NLB
    ... I've read these (and several other knowledgebase articles) and still have a simple conceptual question. ... If I have 2 nics do I assign different statics to both then point them to a third address using the NLB Cluster address? ...
    (microsoft.public.windows.server.networking)