Re: RRAS will not start in with EventID 20152

From: Marina Roos [SBS-MVP] (marina_at_roos.nodontwantspam.nl.com)
Date: 02/06/04 

Date: Fri, 06 Feb 2004 15:14:06 GMT

Hi Craig,

Do you have standard or premium version SBS 2003? I still would recommend
you to post in the 2k3-newsgroup.
Can you post the exact errormessages? 

-- 
Regards,
Marina
[SBS-MVP]
"Craig Ongers" <craig@sat-.co.za> schreef in bericht
news:%23cDCI8J7DHA.1052@TK2MSFTNGP12.phx.gbl...
> Hi Marina,
>
> I find using the wizard or disabling the service to start with a new
> configuration makes no difference. I just cannot assign the 'Remote access
> server' ability because the service then fails almost immediately after
> starting the RRAS service. RRAS starts and works perfectly in the "Router"
> role.
>
> I am assuming a problem with it configuring remote access ports or
something
> like
> that. (as opposed to file/permission/RAS settings itself etc)
>
> Server has 3 on-board NICs (LAN, ADSL, not used) and one modem that people
> need to RAS onto. (will still keep looking into this)
>
> Any help would be cool,
> Craig.
>
> "Marina Roos [SBS-MVP]" <marina@roos.nodontwantspam.nl.com> wrote in
message
> news:geRTb.2119$ks5.2963@typhoon.bart.nl...
> > Hi Craig,
> >
> > Stupid question, but you did run the CEICW-wizard, right? You might have
a
> > look at www.smallbizserver.net to see about RRAS. How many nics in the
> > server?
> >
> > --
> > Regards,
> >
> > Marina
> > Microsoft SBS-MVP
> >
> > "Craig Ongers" <craig@sat.co.za> schreef in bericht
> > news:#Yr3qxl6DHA.3648@TK2MSFTNGP11.phx.gbl...
> > > Hi Marina,
> > >
> > > Thanks for the reply.
> > > So far I have verified all the necessary services are running etc.
> > >
> > > An update: Previously I mentioned RRAS fails regardless of the RRAS
> > config.
> > > That is untrue. It only fails when the "Remote access server" role is
> > > selected. RRAS starts just fine if it is only configured as the
"Router"
> > > role.
> > >
> > > Still stumped at the moment...no reply from sbs (2003) newsgroup...
> > > Craig.
> > >
> > > "Marina Roos [SBS-MVP]" <marina@roos.nodontwantspam.nl.com> wrote in
> > message
> > > news:l3NTb.2113$ks5.2983@typhoon.bart.nl...
> > > > Hi Craig,
> > > >
> > > > If you would have gotten specific error 1060 with that 7024 event,
> than
> > > > article 317158 would be for you (disable RRAS, configure and
enable).
> > > > Have a look at www.eventid.net to see if there are some more
options.
> > > >
> > > > --
> > > > Regards,
> > > >
> > > > Marina
> > > > Microsoft SBS-MVP
> > > >
> > > > "Craig Ongers" <craig@sat.co.za> schreef in bericht
> > > > news:uFFWgxi6DHA.3704@tk2msftngp13.phx.gbl...
> > > > > Hi there,
> > > > >
> > > > > I have received no reply from
"microsoft.public.windows.server.sbs",
> > so
> > > if
> > > > > anyone could offer some advice I would really appreciate it.
> > > > >
> > > > > One of our clients performed an in-place upgrade from SBS2000 to
> > > SBS2003.
> > > > > All is fine, but regardless of the RRAS config, the RRAS service
> will
> > > not
> > > > > start and the following are the only two events logged:
> > > > >
> > > > > Event Type: Error
> > > > > Event Source: Service Control Manager
> > > > > Event Category: None
> > > > > Event ID: 7024
> > > > > Date:  2004/01/28
> > > > > Time:  02:31:15
> > > > > User:  N/A
> > > > > Computer: CPS
> > > > > Description:
> > > > > The Routing and Remote Access service terminated with
> service-specific
> > > > error
> > > > > 87 (0x57).
> > > > >
> > > > > Event Type: Error
> > > > > Event Source: RemoteAccess
> > > > > Event Category: None
> > > > > Event ID: 20152
> > > > > Date:  2004/01/28
> > > > > Time:  02:31:12
> > > > > User:  N/A
> > > > > Computer: CPS
> > > > > Description:
> > > > > The currently configured authentication provider failed to load
and
> > > > > initialize successfully. The parameter is incorrect.
> > > > >
> > > > > Anyone out there that can help ? I believe this error is not
> specific
> > to
> > > > > SBS, but to upgrades from a Win2k OS.
> > > > >
> > > > > Thanks in advance,
> > > > > Craig.
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

Relevant Pages

  • Re: ISA 2004 & SBS 2003
    ... I assume that ISA 2004 also has a Firewall Client. ... > NAT is configured through RRAS. ... > would know the wizards worked again if everything was configured correctly ...
    (microsoft.public.windows.server.sbs)
  • Re: RRAS and RDP issue
    ... While the VPN configuration was not the issue, ... > look into the basic firewall setting in RRAS. ... > expand the server tree ) then expand the IP Routing ...
    (microsoft.public.windows.server.sbs)
  • Re: ISA 2004 & SBS 2003
    ... NAT is configured through RRAS. ... This is what is making me think that it may be a configuration ... I decided to take your advice and reinstall the server ... tools hoping that reconfiguring with the wizards would correct whatever was ...
    (microsoft.public.windows.server.sbs)
  • Multihomed Network Running RRAS & DNS & WINS
    ... I am running the above configuration on a W2K advanced server with two nic ... I am able to logon to the RRAS server and I see the connection ... 2000 domain controllers that have RRAS service and DNS installed and RRAS IP ...
    (microsoft.public.win2000.ras_routing)
  • Re: Multihomed Network Running RRAS & DNS & WINS
    ... all zeros in rras static routes for the internet gateway, ... I am able to logon to the RRAS server and I see the connection ... > configuration is not working because Microsoft has no clear concise ...
    (microsoft.public.win2000.ras_routing)