Re: Static route not working for DNS

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: Marina Roos [SBS-MVP] (marina_at_roos.nodontwantspam.nl.com)
Date: 09/21/04 

Date: Tue, 21 Sep 2004 12:34:55 +0200

Hi Eugene,

Can you post the ipconfig/all from the server please? 

-- 
Regards,
Marina
Microsoft SBS-MVP
"Eugene Tan" <insights-[dropthis]@post1.com> schreef in bericht
news:%23DoqBZ6nEHA.3072@TK2MSFTNGP09.phx.gbl...
> hi,
>
> A customer has a SBS2k3 Premium with 2 NICs.  PCs need to
> access a website that is on a private network (private IP addr).
> Access is via dialup, and in pre-SBS setup this was done via a
> static route in the main router pointing to another router with the
> dialup (Win2k3 points to router1 for 0.0.0.0, and router1 points
> to router3 with a static route for the private network,
> e.g. 192.168.10.0),  this used to work so that even DNS could
> work, i.e. www.abc.com worked.
>
> I've setup a static route (LAN routing) with RRAS and it works.
> Using IE6 I can access the website using IP addr.
>
> I've also setup DNS with a forwarder - abc.com has the private
> network's DNS as forwarders, eg. 192.168.10.4 and xxx.5..
> (should it be *.abc.com?)  However, doing a ping to the website
> domain name doesn't resolve after reboot in command prompt.
> Just before reboot, ping to domain name did resolve, but names
> didn't resolve in IE6 - looking for www.abc.com kept going to
> the public Internet rather than going to the private network.
>
> What's the right way to do this?  What am I doing wrong?
>
> Also, I tried to configure a dialup route in ISA (routing) but the
> dialup checkboxes are greyed out.  Even when RRAS is disabled.
> Any ideas?
>
> TIA,
> Eugene Tan
>
>

Relevant Pages

  • Re: 2nd DHCP Scope?
    ... Does this sound right? ... That will describe to the router how to get to the .9 network. ... A static route will describe what network to go to, ... > but i asume that is because it is probably not registered in DNS. ...
    (microsoft.public.windows.server.networking)
  • Re: Static route not working for DNS
    ... To clarify a bit, when the DNS on SBS2k3 has cached the domain, ... using domain name in IE doesn't resolve. ... I've now received a hosts file for this private network. ... > static route in the main router pointing to another router with the ...
    (microsoft.public.backoffice.smallbiz)
  • Re: Laser printer connection puzzle!
    ... a DHCP server, and it isn't happening. ... networks are not routed directly over the Internet, they need a gateway for ... Usually the router upon which the DHCP server is running will be the ... Each Class C private network can have a maximum of 254 devices. ...
    (uk.comp.sys.mac)
  • Linux firewall behind Cisco DSL Router
    ... ADSL running with DHCP'ed IP from our ISP. ... This router is doing NAT. ... I want to setup a linux router/fw for the network. ... address of the private network PC's. ...
    (comp.os.linux.networking)
  • Re: Linux firewall behind Cisco DSL Router
    ... > are in the Middle East, with a paranoid ISP, so on the router we ... What purpose would a hub serve on the DSL modem/router if it only gives ... Yes you have to masquerade your own private network, ... One issue may be mtu path discovery. ...
    (comp.os.linux.networking)